Influence of Manufacture of Textiles, Clothing, and Leather and Manufacture of Paper, Printing, and Publishing on Economic Growth

Iskandar Muda (Faculty of Economics and Business, Accounting Department, Universitas Sumatera Utara, Medan, Indonesia)
Nurlina (Faculty of Economic, Universitas Samudra, Langsa, Indonesia)

Proceedings of MICoMS 2017

eISBN: 978-1-78756-793-1

ISSN: 2516-2853

Publication date: 4 May 2018

Abstract

Purpose – The purpose of this research is to know the influence of manufacture of textiles, clothing, and leather and manufacture of paper, printing, and publishing on economic growth.

Design/Methodology/Approach – The method of research used was a causal research design in North Sumatera Province. The data used are secondary data sourced from Statistics Agency of North Sumatera Province. The method of analysis used in this research is SEM method using software Smart PLS.

Findings – The results show that manufacture of textiles, clothing, and leather and manufacture of paper, printing, and publishing influence to the economic growth.

Research Limitations/Implications – Limitations of the study included not analyzing by data pooling, and samples were restricted only to North Sumatra Province. The implication of this research is that the variables of manufacture of textiles, clothing, and leather give a significant contribution to the economic growth of North Sumatra. To this end, that need to be made some policies shoul be implemented to facilitate manufacture of textiles, clothing, and leather others invest in the district and city in North Sumatra.

Originality/Value – The originality of this study attempts to examine export indicators in certain segments where other studies do not examine them.

Keywords

Citation

Muda, I. and Nurlina, (2018), "Influence of Manufacture of Textiles, Clothing, and Leather and Manufacture of Paper, Printing, and Publishing on Economic Growth", Proceedings of MICoMS 2017 (Emerald Reach Proceedings Series, Vol. 1), Emerald Publishing Limited, Leeds, pp. 107-113. https://doi.org/10.1108/978-1-78756-793-1-00048

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

License

Published in the Emerald Reach Proceedings Series. Published by Emerald Publishing Limited. This article is published under the Creative Commons Attribution (CC BY 4.0) licence. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this licence may be seen at The full terms of this licence may be seen at http://creativecommons.org/licences/by/4.0/legalcode


1. Introduction

The positive performance of the industrial sector has contributed substantially to the increase in economic growth in the first quarter of 2017 which reached 5.01% or above the economic growth in the same period last year of 4.92% (Suyanto, 2011). Many believe that this component is able to describe the overall economic condition as well as prospects for growth Industrial sector is one of the main driving force of economic growth of a country (Suyanto, 2011; Nurlina and Muda, 2017; Sirojuzilam et al., 2017; Syahyunan et al., 2017). Industrial development will have a major impact on increasing prosperity and prosperity of the people, promoting economic growth, encouraging the creation of appropriate technologies, strengthening the people’s capacity in the process of national economic growth, expanding job opening and business opportunities, and strengthening national stability (Ningrum, 2008). Industrial technology improvement program is implemented to increase the added value of industrial products, and gradually change the structure of the added value content so that it is increasingly based on the ability of technology and human resources quality; improve the efficiency, quality, and competitiveness of industrial products with the characteristics of competitive advantage and high performance; and accelerate the process of transfer of industrial technology (Jones et al., 2017; Muda et al., 2017a, 2017b). These strategic steps are taken to enable the industry’s ability to grow. The process of mastery of industrial technology, both manufacturing technology and product technology, is done gradually and has shown significant progress. Mastery technology is gained through, among other things, through technology transfer processes, technology adaptation as well as research and development of applied technology, both conducted through government-owned research and development institutions (R&D) as well as in industrial activities. R&D of government is directed to make various prototype of equipment that suitable with requirement of small industry, such as agricultural processing equipment, leather industry, metal and machinery industry, and handicraft (Asmeri et al., 2017; Khoiruman and Haryanto, 2017). Structuring the industrial structure is aimed at increasing the added value of industrial products, reducing the dependency of imports of industrial products economically, expanding the national industrial production base vertically and horizontally, including developing new industries in order to fill the empty upstream–downstream series efficiently, increasing efficiency and competitiveness as well as expanding the type of export-oriented industry, and strengthening the industrial structure in terms of institutional aspects of business and industry players. Structuring of industrial structures is also closely linked to efforts of industrial dispersal to regions to improve resource allocation efficiency while also developing industrial growth centers. Nationwide the share of the paper industry on economic growth has decreased, while competition in the world market tends to be more stringent. Textile and textile products have an important role in the economy of North Sumatra Province. In the last 5 years, however, the industry’s share of economic growth has declined, while competition in the world market is tighter. The textile industry is competing with similar industries in China. After the cost of labor in China is increasingly expensive so that the cost of production is soaring, the world’s textile manufacturers are now starting to look at Indonesia as its production base. Business sector developments textile and paper as one of the foundations decision making of the perpetrator’s strategy business and government. Other goals are to identify the field which business is currently being progressing, in terms of its contribution to the economic growth of the province of North Sumatra. This research can be made the basis for that next research more of a quantitative study. These descriptive studies become complementary to other quantitative studies, for business decision making and government.

2. Material and methods

This is associative-causal research, which was aimed at analyzing the relationship between two or more variables. Type of data is Secondary Data from North Sumatera in Figures by Central Bureau of Statistics 1999–2016. Causal-comparative research is ex post facto, meaning data are collected after all the events in question (Badaruddin et al., 2017; Marhayanie et al., 2017; Muda et al., 2017a, 2017b). Research takes one or more of the consequences as dependent variables and tests the data by tracing back to the past in search of causes, interrelationships and meanings and tending to rely on quantitative data. The purpose of this study was to investigate the possibility of causal relationships based on observations of the consequences, and to rediscover facts that may be the cause through certain data. Causal-comparative research has ex post facto characteristics, meaning data are collected after all the events in question have taken place. Research takes one or more of the consequences (Achmad et al., 2017) and tests the data by tracing back to the past in search of causes, interrelationships and meanings and tending to rely on quantitative data.

3. Result and discussion

3.1. Result

3.1.1. Evaluation of the structural model (Inner Model)

Inner model evaluation through the bootsraping menu also generates Tstatistics values that will be used to test the hypothesis. The criteria are Tstatistic> 1.66 (Dalimunthe et al., 2016; Ferine et al., 2017; Lubis et al., 2017). If the value of tcount <ttable, then Ho accepted and when the value of tcount > ttable, then Ho is rejected which means that the variable in question there is influence which is significant (Muda et al., 2017a, 2017b). This means that the independent variables tested have an effect significantly to the dependent variable. The result of T-statistics value in the table path coefficients is presented in Figure 1.

Figure 1. Overall Model with Co-efficient

Figure 1.

Overall Model with Co-efficient

The effect test can be seen in Table 1.

Table 1.

The Result of Bootsraping

Original Sample Sample Mean Standard Deviation T Statistics P Values
Manufacture of paper, printing, and publishing (X2) -> the economic Growth (Y) −0.154 −0.125 0.251 0.613 0.540
Manufacture of textiles, clothing, and leather (X1) -> The economic growth (Y) −0.713 −0.759 0.185 3.859 0.000

Table 1 produces a coefficient of 0.005, smaller than 1α = 5% then the decision of hypothesis testing rejects H0 and accepts the hypothesis Ha (Muda, 2017; Sihombing et al., 2017; Honggowati et al., 2017; Rahmawati et al., 2017). The results show that manufacture of textiles, clothing, and leather are significant variables on the economic growth (Y). In addition to hypothesis testing through the bootstrapping menu that produces T-statistics, inner model evaluation is also done by reviewing the R-square value (Muda et al., 2017a, 2017b). The R-square value generated from the inner model evaluation is presented in Table 2 and Figure 2.

Figure 2. F Square

Figure 2.

F Square

Table 2.

R-Square Value

R Square R Square Adjusted
The economic growth (Y) 0.682 0.633

The variation of R-square adjusted value is 63.3%. The existence of manufacture of textiles, clothing, and leather also has a great contribution on economic development of a region, because with the number of business units workers that many will create jobs and be able to absorb labor so it has the potential to reduce unemployment in an area (Suprianto et al., 2017). Types of textiles, clothing, and leather industries have enough influence on the industry in Indonesia. This shows that are quite potential in reducing unemployment because it absorbs a relatively large workforce (Suyanto, 2011). Unemployment is the biggest problem for a country, because unemployment leads to low income and community productivity in the end will lead to poverty and other social problems. Country which is developing is often faced with the large unemployment rate due the narrowness of employment and the size of the working age population. Narrow employment is due to the scarcity of capital to invest, the number labor force, and socio-political issues in the country. One of the indicators to see how large an area is absorbing energy work is by looking at some variables that affect demand labor in a company (Suyanto, 2011). Small industry development is the way that is considered a major role in the development of the manufacturing industry (Muda et al., 2017a, 2017b). The development of small industries will help overcome unemployment problems considering the technology used is labor-intensive technology so it can increase employment and business opportunities, which in turn encourage regional development and rural areas (Sirojuzilam et al., 2017). The role of the home industry or small industry has an influence big on the economy in Indonesia due to build an industry this small does not require a large capital and able to absorb labor. Larger employment must be sustained by growth a relatively high economy. Very economic factor effect on investment is interest rate, taxation policy, regulation banking, and basic infrastructure. While the noneconomic factor is stability politics, law enforcement, land issues for business labs, crime rates in society, labor and student demonstrations, government commitments, commitment of banking, infrastructure and bureaucratic services of local government in particular business licensing (Khoiruman et al., 2017). Necessary government policy within creates a conducive climate for increasing investment activities. Other than that required investment creation strategies in the labor-intensive industrial sector to reduce the increasing unemployment rate (Sirojuzilam et al., 2017). For that industrial sector which is able to absorb labor becomes very important in terms of helping increase in employment.

4. Limitation and implications

Limitations of the study was include the following: not analyzed by data pooling and samples were restricted only to North Sumatra Province. The implication of this research is that the variables of manufacture of textiles, clothing, and leather give a significant contribution to the economic growth of North Sumatra. To this end some policies should be implemented to facilitate manufacture of textiles, clothing, and leather in the District and City in North Sumatra.

5. Conclusions

The results show that manufacture of textiles, clothing, and leather influence the economic growth and manufacture of paper, printing, and publishing contribute significantly to the economic growth in North Sumatera.

References

Achmad, N. and Muda, I. (2017). “Economic Activities of Karo Older Adults in Lingga Village, Tanah Karo Regency, North Sumatera, Indonesia”. International Journal of Economic Research, Vol. 14, No. 16, pp. 365379.

Asmeri, R., Alvionita, T. and Gunardi, A. (2017). “CSR Disclosures in the Mining Industry: Empirical Evidence from Listed Mining Firms in Indonesia”. Indonesian Journal of Sustainability Accounting and Management, Vol. 1, No. 1, pp. 1622. DOI: 10.28992/ijsam.v1i1.23.

Badaruddin, Revida, E., Ermansyah and Muda, I. (2017). “Village Governance with Implementation of Law Number 6 of 2014 on the Village and Village Administration”. International Journal of Economic Research, Vol. 14, No. 16, pp. 350363.

Central Bureau of Statistics. (2001). North Sumatera in Figures 2001. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2002). North Sumatera in Figures 2002. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2003). North Sumatera in Figures 2003. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2004). North Sumatera in Figures 2004. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2005). North Sumatera in Figures 2005. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2006). North Sumatera in Figures 2006. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2007). North Sumatera in Figures 2007. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2008). North Sumatera in Figures 2008. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2009). North Sumatera in Figures 2009. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2010). North Sumatera in Figures 2010. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2011). North Sumatera in Figures 2011. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2012). North Sumatera in Figures 2012. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2013). North Sumatera in Figures 2013. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2014). North Sumatera in Figures 2014. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2015). North Sumatera in Figures 2015. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2016). North Sumatera in Figures 2016. Republic of Indonesia. Jakarta.

Central Bureau of Statistics. (2017). North Sumatera in Figures 2017. Republic of Indonesia. Jakarta.

Dalimunthe, D.M.J. and Muda, I. (2017). “The Empirical Effect of Education and Training to the Performance of Employees”. International Journal of Applied Business and Economic Research, Vol. 15, No. 24, pp. 54235437.

Ferine, K.F., Ermiaty, C. and Muda, I. (2017). “The Impact of Entrepreneurship and Competence on Small Medium Enterprises Tangan Di Atas (TDA) Medan Entrepreneurs’ Work Performance”. International Journal of Economic Research, Vol. 14, No. 16, pp. 380393.

Honggowati, S., Rahmawati, R., Aryani, Y.A. and Probohudono, A.N. (2017). “Corporate Governance and Strategic Management Accounting Disclosure”. Indonesian Journal of Sustainability Accounting and Management, Vol. 1, No. 1, pp. 2330. DOI: 10.28992/ijsam.v1i1.24.

Jones, P., Wynn, M., Hillier, D. and Comfort, D. (2017). “The Sustainable Development Goals and Information and Communication Technologies”. Indonesian Journal of Sustainability Accounting and Management, Vol. 1, No. 1, pp. 115. DOI: 10.28992/ijsam.v1i1.22.

Khoiruman, M. and Haryanto, A.T. (2017). “Green Purchasing Behavior Analysis of Government Policy about Paid Plastic Bags”. Indonesian Journal of Sustainability Accounting and Management, Vol. 1, No. 1, pp. 3139. DOI: 10.28992/ijsam.v1i1.25.

Lubis, A., Rustam and Muda, I. (2017). “Factors Affecting the Cost of Agency of Village Owned Enterprise (BUMDES) in Indonesia”. International Journal of Economic Research, Vol. 14, No. 16, pp. 334348.

Marhayanie, Mutia Ismail and Muda, I. (2017). “Impact of the Online Car Rental Service Order System on Sales Turnover with Financial Literacy Customer as Intervening Variables”. International Journal of Economic Perspectives, Vol. 14, No. 16, pp. 317332.

Muda, I., Rahmanta, S.A. and Marhayanie. (2017a). “The Role of Working Capital, Productivity, Applied Technology and Selling Market Prices on Fisherman’s Revenues”. International Journal of Economic Research, Vol. 14, No. 16, pp. 291302.

Muda, I., Weldi, M., Siregar, H.S. and Indra, N. (2017b). “The Analysis of Effects of Good Corporate Governance on Earnings Management in Indonesia with Panel Data Approach”. Iranian Economic Review, Vol. 21, No. 4, pp. 657669.

Muda, I. (2017). “The Effect of Allocation of Dividend of the Regional Government-Owned Enterprises and the Empowerment Efforts on the Revenue of Regional Government: The Case of Indonesia”. European Research Studies Journal, Vol. XX, No. 3A, pp. 223246.

Ningrum, V. (2008). “Foreign Investment and Application Labor in the Industry Sector”. Journal of the Indonesian Population, Vol. 3, No. 2, pp. 2943.

Nurlina and Muda, I. (2017). “The Analysis of the Effects of Capital Expenditure and Human Development Index on Economic Growth and Poverty in East Aceh Regency”. International Journal of Economic Research, Vol. 14, No. 16, pp. 395409.

Rahmawati, R., Rispantyo, R. and Djamaluddin, S. (2017). “Mentoring Function and Quality of Supervisor Auditor Relationship: Organizational Justice as a Mediation”. Indonesian Journal of Sustainability Accounting and Management, Vol. 1, No. 1, pp. 4048. DOI: 10.28992/ijsam.v1i1.26.

Sihombing, M., Muda, I., Jumilawati, E. and Dharsuky, A. (2017). “Factors Affecting the Success of Local Innovation Systems with Government Programs as Moderators”. International Journal of Economic Research, Vol. 14, No. 16, pp. 272289.

Sirojuzilam, Hakim, S. and Muda, I. (2017). “Effect of Private Collaborative as a Moderation of Success of Agropolitan Program. International Journal of Economic Research, Vol. 14, No. 16, pp. 304315.

Suprianto, E., Suwarno, S., Murtini, H., Rahmawati, R. and Sawitri, D. (2017). “Audit Committee Accounting Expert and Earnings Management with “Status” Audit Committee as Moderating Variable”. Indonesian Journal of Sustainability Accounting and Management, Vol. 1, No. 2, pp. 4958. DOI: 10.28992/ijsam.v1i2.16.

Suyanto. (2011). “Business Development and Industry Indonesia 1970–2010: A Macroeconomic Review”. Journal of Social Sciences and Humanities, Vol. 4, No. 1, pp. 7084.

Syahyunan, Muda, I., Siregar, H.S., Sadalia, I. and Chandra, G. (2017). “The Effect of Learner Index and Income Diversification on the General Bank Stability in Indonesia”. Banks and Bank Systems, Vol. 12, No. 4, pp. 5664. DOI: http://10.21511/bbs.12(4).2017.05.

All papers within this proceedings volume have been peer reviewed by the scientific committee of the Malikussaleh International Conference on Multidisciplinary Studies (MICoMS 2017).

Corresponding author

Iskandar Muda can be contacted at
Prelims
Introduction
Acknowledgement I
Acknowledgement II
The Effect of Job Satisfaction and Work Motivation on Organizational Commitment and Organizational Citizenship Behavior in BNI in the Working Area of Bank Indonesia Lhokseumawe
The Effect of Work Motivation on the Employee Performance with Organization Citizenship Behavior as Intervening Variable at Bank Aceh Syariah
Life-Cycle Performance of a Bridge Subjected to Multiple Heavy Vehicle Impacts
The Efforts of Improving the Professionalism of Lecturers towards the Presentation and Change of KKNI within the University Environment in Aceh
Morphological Process of Devayan: An Analysis of Morphological Tipology
Effect of Freight Transportation for Regional Development in the North Zone of Aceh
The Roles of Digital Democracy on Political Education for Young Generation
Disorders of Sex Development: Ambiguous Genitalia and Partial Androgen Insensitivity Syndrome
Difference Analysis of the Autonomy of Extended Regencies in Aceh Province Indonesia
An analysis of Service Quality on Mustahiq Satification using the Kano Model (Case Study on Baitul Mal)
Exploration and Morphological Characterization of Vegetative Part of Avocado at Bebesan Subdistrict Central Aceh District, Indonesia
Poverty Effectiveness for the Maisir (Contest) in the City of Indonesian Aceh Province
Measurement of Study Productivity and Evaluation Analysis by using the American Productivity Center (APC) Model at a Palm Oil Factory (Pks PT. Syaukath Sejahtera)
The Development of an Independent Entrepreneurship Model Through Creative Economy for Women in Lhokseumawe City
Regionalism of Aceh’s Traditional Architecture at Bujang Salim Mosque at Krueng Geeukeuh, Aceh
High Growth and Diameter of the Stem of Corn Plants (Zea May, S) with a Different Cropping Pattern
Influence of Manufacture of Textiles, Clothing, and Leather and Manufacture of Paper, Printing, and Publishing on Economic Growth
Land Erodibility and Land use Directions in Krueng Seulimum Watershed Aceh Province
The Effect of Fermentation of the Peel of Arabica Coffee with Win Prob Probiotics on Crude Fiber Content and Fiber Fraction
Teaching English International Lingua Franca (ELF) in ASEAN Economic Community Context: Teachers and Students Perspectives
Animation as a Creative Industry: A Strategy to Build Creativity and Independence of Youth in Padang, West Sumatra
Improving Production of Liquid Smoke from Candlenut Shell by Pyrolisis Process
Interpersonal Communication of Commercial Sex Workers Transaction with Customers in Syariah Law Area in Indonesia
Macrozoobentos Diversity Index as a Bioindicator in Krueng Cunda River to Support the Success of the Shrimp Agribusniness at Lhokseumawe City, Aceh
The Examination Model of Aceh Commodity Export Firms’ Performance
The Role of Fishing Techniques with Tuah Teng on Food Security in Facing the Asean Economic Community
Reconstruction of Aceh Cultural Identity in the Discourse of Aceh Language Lesson Books in Elementary School
The Effect of Monosodium Glutamate (Msg) Administration to Pyramidal Cells Necrosis on Cerebral Cortex of Wistar Male Rats (Rattus Norvegicus)
Personal Construct Experience of Tionghoa Community in Aceh Reality
Study of Mineralogy Composition, Total, and Exchangable Content of K, Ca, and Mg of Volcanic Ash from Sinabung Mountain Eruption in North Sumatera, Indonesia
The Role of Law in Economic Development: To Develop a Special Economic Zone in Order to Build a National and Regional Economy
Model Corporate Social Responsibility Based on Local Wisdom in West Aceh Regency
Recurrence of Intravenous Leiomyomatosis: A Rare Cause of the Obstruction of the Right Heart
Single Mother Role in The Success of Their Children (Phenomenological Study of Single Women in Makassar City)
Optimal Lot-Sizing Algorithms on Stochastic Demand at the Retailer
Predict Environmental Conditions Using Groundwater Interpretation in Subdistrict Hamparan Perak, Deli Serdang, North Sumatera
Public Discovery of the Concept of Time Value ofMoney with Economic Value of Time
Study on Impact Strength Against Welding Smaw on Hardening Steel AISI 1050
What is the Determinant of Non-Performing Financing in Branch Sharia Regional Bank in Indonesia
Spatial Stochastic Modeling of Adolescent and Under-Five Children Nutritional Status: A Case Study from Aceh, Sumatera Island, Indonesia
Religious Tourism: Concept of Community-Based TourisminAceh Singkil, Indonesia
The Contribution of Revenue and Consumption Cost of Soybean Farmers in Muara Batu Subdistrict Aceh Utara
The Composition of Women Parliament Members Presence in Local Parliament in Aceh (A Case Study at Provincial Parliament of Aceh Province During the Period of 2014 to 2019)
Personal Branding Tri Rismaharini the Provision in Media
Analysis of Factors Affecting the Poverty Level of Farmers Post-Tsunami in Aceh
Dimension of an Islamic Model Value on the Existence of Syariah Walmart
Batik Jambi Promotion Based on Social Media in Asean Economics Community
Islamic Banks in Indonesia: Analysis of Efficiency
Design of Information Monitoring System Flood Based Internet of Things (IoT)
Economic Development and Access to Fish Resources: A Review Sociology on Fisherman’s Production Access in Kuala Langsa, Aceh
Dynamics and Prospect of Wali Nanggroe Institution Post-Conflict in Aceh: Analysis of Policy and Educational Development
Learning Management of Bahasa in Senior High Schools
The Difference in the Antimicrobial effect of Katuk Leaf Extract (Sauropus Androgynus (l.) Merr.) Concentration against Escherichia Coli
City Branding of Denpasar City as a Creative City Through the Denpasar Festival Event
Semantics Equivalence of Cultural Terms of Meurukon Texts Translated from Acehnese into Indonesian
Preparation of Activated Carbon From Banana (Musa acuminate L.) peels for Carbon Monoxide Adsorption
Thermal Behavior of Modified Thermoplastic Starch (TPS) Synthesized from Sago (Metroxylon Sagu) with Diphenylmethane Diisocyanate and Castor Oil
Typhoid Fever Profiles at Cut Meutia Hospital, North Aceh, Indonesia, in 2016-2017
Student Radicalism Ideology Prevention Strategy: A Study at an Islamic Boarding School in Jabal Nur, North Aceh, Indonesia
Implementation of Task-Based Learning for Non-English Students: A Practice in Malikussaleh University
Design of Wild Animal Detection and Rescue System with Passive Infrared and Ultrasonic Sensor based Microcontroller
Policy of Educational Budget Aceh Regency
Foreign Direct Investment Inflow into Aceh province of Indonesia After a Peace Agreement
Design of Web Based Fire Warning System Using Ethernet Wiznet W5500
Sari Cincau Ngrayun Equals with Modern Ready-to-Drink Beverage
The Status of Conservation of Mangroves in the Krueng Reuleng River Area, Leupung, Aceh Besar Regency, Indonesia
Analysis of Understanding the Level of Vibration and the Wave Concept with a Demonstration Method for Students in SMAN 1 Peureulak, Aceh
Screening of Volatile Organic Compounds Using Gore-Sorber Method for Predicting Hydrocarbon Generation
Incorporating Peace Education into Aqidah Akhlak Subject in East Aceh
Learning Motivation of Peripheral University Students and its Relation with their English Grades
Thermal Cracking of Low Temperature Conversion on Low Density Polyethylene Plastic Waste for Liquid Hydrocarbon
Correlation of Lead and Zinc Contents in Sediments And Faunus Ater Against Faunus Ater Density in Reuleung River, Leupung, Aceh Besar
The Correlation between Stress Level and Degree of Depression in the Elderly at a Nursing Home in Lhokseumawe in the Year 2017
Effect of Palm Oil Bunches Microfiller on LDPE-recycled Composite Tensile Strength through Melt Blending Process
CSR and Profitability in IDX Agricultural Subsectors
The Crown Witness and the Protection of Human Rights in Criminal Law Verification
Design and Implementation of SCADA Wireless Communication System for Monitoring the Performance of Microhydro Power Plant Based on Protocol AX.25
Production of Lipid Biomass in Locally Isolated Microalga Cultivated in Palm Oil Mill Effluent (POME)
An Analysis and Design of a Virtual Collaboration Information System of the Jamu Supply Chain Network Based on a Fair Adaptive Contract
Adsorption of Manganese (II) Ion in the Water Phase by Citric Acid Activated Carbon of Rice Husk
Eco-informatics: The Encouragement of Ecological Data Management
Challenges in Designing ESP Course for First Year Students of Engineering Faculty at Malikussaleh University
Isotherm and Kinetics of Cd(II) Adsorption by Durian (Durio zibethinus) seed Immobilized into Ca-alginate
Science, Technology, Engineering, and Mathematics (STEM) Learning on Student’s Science Process Skills and Science Attitudes
Effect of Perception of Facilities, Intensity of Conduct, and Satisfaction of Tax Payers to Submission of Letter by E-Filing Notice on Tax Service
Aceh: Conflict Development after the Helsinki Agreement
The Discretionary Accrual in the Financial Statement of a Public Company in Indonesia: A Literature Review
Inventory and Morphological Characterization of Durian (Durio Zibethinus) in Langkahan and Sawang Sub-District of North Aceh Indonesia
Model of Sustainable Electrical Power Management: Lamp Efficacy of the National Street Lighting in North Sumatera Province
Hamming Index for Some Classes of Graphs with Respect to Edge-Vertex Incidence Matrix
Electrical Automation of Solar Cell-Based Arduino Uno With 16 × LCD Display
Concept Designs of Patient Information Security Using e-Health Sensor Shield Platform on Blockchain Infrastructure