Pigment & Resin Technology

Preparation and properties of glass fiber/PBAT shape memory composites

The purpose of this study is to improve the mechanical properties of PBAT. Polybutylene adipate terephthalate (PBAT) has excellent biodegradability, which has been widely used in…

Preparation and properties of fluorinated VAc-VeoVa10 latex emulsified with allyl nonyl phenoxy propyl alcohol polyoxyethylene ether ammonium sulphate

The traditional VeoVa10-VAc copolymer latex, which prepared via the emulsion polymerization of the mixed monomers of VAc and VeoVa10, has the poor water resistance and thermal…

Properties and characterization of cross-linked VAc-VeoVa10 latex emulsified with reactive surfactants

The traditional vinyl ester of neodecanoic acid-vinyl acetate (VeoVa10-VAc) copolymer latex is a linear structure with poor film formation, thus causing solvent resistance and…

Natural dyeing of khadi cotton using rare earth salts as mordant with annatto extract

Replacing conventional mordants by benign mordants, rare earth (RE) salts have been used in the process of natural dyeing with annatto seed extract. The purpose was threefold  

The history of natural dyeing and investigation of the antibacterial activity of Hibiscus sabdariffa L. on woolen fabrics

Natural dyeing has existed in human life from past to present. Although it lost its importance after the industrial revolution, it has started to make again a name for itself…

Multidimensional stimulation response RTP micron fiber thin film

The purpose of this research is as follows: DPP-BOH-PVA has been synthesized from 1,1′:3′,1″-terphenyl-5'-boronic acid (DPP-OH) and polyvinyl alcohol (PVA). The afterglow lifetime…

Preparation of fluorine and silicon modified cationic acrylic resin and its application in cathodic electrodeposition coatings

Fluorinated silicon polymers are expected to be adopted in specific coatings to afford outstanding advantages, such as high chemical and photochemical resistance, low surface…

New eco-friendly succinimide linseed oil resin: synthesis, characterization, DFT and docking studies for surface coating

The purpose of this study is to develop a new protective coating formulation for industrial use, using new eco-friendly succinimide linseed oil resin.

Fabrication of highly efficient cationic flocculant based on rice straw plant waste using microwave initiation technique: synthesis, characterization and flocculation performance

This study aims to describe the conversion of rice straw (RS) as an agricultural plant waste to high-performance cationic flocculant for kaolin clay suspension in wastewater…

Monitoring the anticorrosion performance of developed epoxy-based paint formulations on metallic surfaces by electrochemical impedance spectroscopy

This study aims to investigate the impact of varying solid ratios in epoxy-based formulations on their corrosion resistance. The amounts of epoxy resin in the formulations were…

Synthesis and evaluation of substituted cyclodiphosph(V)azane sulfonamide and their Fe(III), Ag(I) metal complexes as novel insecticides for protective coatings

This study aims to synthesize new cyclodiphosph(V)azane derivatives, 2,2,4,4-tetrachloro-1,3-di-[o-nitriyl]-2,4-di-[N-(pyrimidin-2-yl)benzenesulfonamide]-1,3,2,4…

Non-isothermal crystallization kinetics of organic montmorillonite/SiO2 aerogel/PET composites

Crystallization kinetics is a key factor that controls the crystallization process of polymers and influences the crystallinity and morphology of polymers. This study aims to…

Evaluation of the antioxidant potential for three essential oils on the properties of wood pulp paper

This study aims to determine the efficiency of three types of essential oils (EOs) as antioxidants on wood pulp paper samples: camphor oil, clove oil and lavender oil. Because of…

Fabrication of a flexible inner prosthetic socket via the FGM technique

The purpose of this study was to fabricate a flexible inner socket with enhanced stiffness and hardness distribution by using the functional gradient method (FGM). The FGM…

Comparative analysis on erosion performance of thin coated GFRP laminates in offshore conditions

The purpose of this paper is to demonstrate the erosion performance of coated and uncoated surfaces of glass fibre-reinforced polymers (GFRP) wind turbine blade material using…

Preparation and properties of organic montmorillonite/SiO2 aerogel/PET composites and their fibers

The purpose of this study is to improve the mechanical properties, thermal insulation properties and flame retardant properties of polyethylene terephthalate (PET), the organic…

Uses of black pigmented CAS glass in conventional ceramic industry: production, impediments to metallization, and startling approaches for color evaluation in ceramic tech-artistry

The purpose of this study is to develop black pigmented ceramic stoneware bodies that integrate various aspects of material composition and color potential. Recent research has…

Experimental study on the use of green antimicrobial and plasticized agents during the lining of oil paintings with gelatinous materials

This paper aims to assess the efficiency of emulsified essential oils in glycerol as eco-friendly antimicrobial and plasticized agents added to the biopolymer of gelatin for…

Synthesis of imino methyl-etherified amino resin by one-step two-stage catalysis and its application in high solid content coating

This paper aims to study the direct synthesis of imino methyl ether amino resin using commercially available formaldehyde, melamine and methanol through one-step two-stage…

Dyeing kinetics and thermodynamics of mono-chlorotriazine reactive dye in recycled wastewater

This study aims to elucidate the dyeing kinetics and thermodynamic relationships of CI Reactive Red 24 (RR24) on cotton fabrics, achieve the recycling of inorganic salts and water…

Study on the extraction and stability of tea stem pigment

The purpose of this study is to evaluate the tannase-assisted extraction of tea stem pigment from waste tea stem, after which the stability of the purified pigment was determined…

A facile approach for fabrication functional finishing and coloring cotton fabrics with haematoxylum campechianum L. Bark

This paper aims to focus on the aqueous extraction of natural dye from haematoxylum campechianum L. bark for finishing the bio-mordant cotton fabrics producing value-added…

The multipurpose utilization of inorganic materials in adsorption treatment of wastewater and core-modification of color index pigment red 57:1

This study aims to realize the multipurpose use of inorganic materials in adsorption treatment of pigment wastewater and preparation of core-modified Color Index Pigment Red 57:1…

Polymer composites with advanced pigments: enhancing properties and applications

This study aims to explore the synthesis, characteristics and utilization of polymer composites integrated with cutting-edge pigments.

Fabrication and properties of photothermal conversion and thermochromic cotton yarn

This paper aims to demonstrate that, in line with the emerging trend of multifunctional yarn development, cotton yarn can effectively harness renewable solar energy to achieve…

Differentiation of natural indigo and synthetic indigo in dye powders and their dyed products (yarns and fabrics) by static headspace gas chromatography-mass spectrometry

The precise and sensitive methods for authentication and differentiation of natural and synthetic indigo dyes are required for assurance of textile safety and public health. This…

Application of ZnAl layered double hydroxides for the formulation of stable and safe cosmetic pigments

This study aims to produce composite pigments, including SHS/ZnAl-LDHs, IDS/ZnAl-LDHs and SNND/ZnAl-LDHs, with improved coloration, enhanced photostability and thermostability and…

Prediction of effective parameters for 3D printing of poly lactic acid-carbon fibre composites using intelligent frameworks based on mechanical response

This paper aims to find the effective 3D printing process parameters based on mechanical characteristics such as tensile strength and hardness of poly lactic acid (PLA)/carbon…

Captivating coloring and antimicrobial properties of tea leaf and eucalyptus bark on jute–cotton union fabric

The purpose of this study was to assess the repercussions of eucalyptus bark and tea leaf extract as natural dyes and antibacterial agents for jute–cotton union fabric.

Synthesis of cottonseed oil water-based alkyd resin and its coating performance

The objective was to investigate the utility of cottonseed oil (CSO) as a raw material for the synthesis of CSO water-based alkyd resin. The synthesis involved the polymerization…

P(St-BA-MAA)@P GA-Fe3+ photonic crystal composite inks for the construction of noniridescent structured colors on fabric substrates

This paper aims to prepare Poly(Styrene-Butyl acrylate-Methacrylic acid) @Poly Gallic acid-Fe³⁺ photonic crystal composite inks [P(St-BA-MAA)@PGA-Fe³⁺ PCCI, @ means the PGA-Fe³⁺…

Facile one-pot synthesis and characterization of castor oil-based acrylate oligomer for UV curable wood coating

For the sake of sustainable development and environmental preservation, it is crucial to develop UV-curable coatings composed of renewable resources. Castor oil, being both…

Investigation of using amine and acetylamine functional units on naphthalimide dyes for photovoltaic devices

The purpose of this paper is to introduce four new organic dyes based on naphthalimide for dye-sensitized solar cells (DSSCs).

Arsenic adsorption from aqueous solution using graphene oxide-sodium silicate nanocomposite modified by silver nanoparticles: process modeling by response surface methodology (RSM)

This study aims to investigate the efficacy of Ag@GO/Na₂SiO₃ nanocomposite in eliminating As from aqueous solutions. Employing response surface methodology, the research…

Multilayer polyester tire cord fabrics reinforced gamma irradiated SBR/devulcanized waste rubber: impact of fabric layers and devulcanization methods

This study aims to investigate the influences of polyester fabric layers on the mechanical properties of SBR and devulcanized waste rubber composite materials, as well as the…

Performance enhancement of reactive foam dyeing for cotton fabric through different foaming agents and stabilizers

In the textile dyeing industry, the foam dyeing has been recognized as a significantly sustainable alternative for the cotton fabrics. However, this efficient technology undergoes…

Nylon dyeing with reactive dyes by intermittent exposure to microwave irradiations to improve leveling

Reactive dyes are believed to have great potential for nylon dyeing, but these anionic dyes tend to rush toward the nylon at the beginning of the process, resulting in uneven…

High performance coating formulation using multifunctional monomers and reinforcing functional fillers for protecting metal substrate

Effects of corrosion are very dire and mitigation of corrosion holds prime importance. Protective coatings play major role in preventing corrosion of metals and coating…

Study on barrier properties, biodegradability and antimicrobial activity of linear low density polyethylene/starch blends

The present work aims to prepare biocomposites blend based on linear low density polyethylene/ starch without using harmful chemicals to improve the adhesion between two phases…

A plate containing a central rectangular hole made of PMMA resin and reinforced with graphene particles: low-velocity impact analysis

Due to the important and extensive use of graphene in the engineering structures, the purpose of this paper is to investigate the low-velocity impact (LVI) response of a…

Effect of polymerization methods on surface roughness and hardness of commercially available self-curing acrylic resins: a comparative study

This paper aims to compare the surface roughness and hardness of three commercially available self-curing acrylic resins for dental use, under different polymerization conditions.

Non-invasive measurement of spoilage of packed fish using halochromic sensor

This study aims to develop a pH-functional thin-film sensor for non-invasive measurement of spoilage of packed fish.

Exploring the utilities of rice straw black liquor (Part X): biomass-derived copper (lignin/silica/fatty acids) complex as a natural antioxidant for EPDM composites (Part V)

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when…

On-site colorimetric determination of pH in brackish water aquaculture

This study aims to describe on-site determination of pH in aquaculture using a portable colorimeter.

Macro-micro correlation analysis of rheological characteristics for composite modified asphalt

This study aims to investigate the micro mechanism of macro rheological characteristics for composite modified asphalt.Grey relational analysis (GRA) was used to analyze the…

Applicability of AgNPs/GO/Na2SiO3 nanocomposite as a charged nanosorbent in the removal of cationic and anionic model dyes from water

This study’s aim is to introduce a high-performance sorbent for the removal of both anionic (Congo red; CR) and cationic (methylene blue; MB) dyes from aqueous solutions.

Novel nano magnesium oxide modified hybrid emulsion for antimicrobial coating

The purpose of this paper is to develop an inorganic-organic hybrid emulsion polymer using grafted hyperbranched alkyd modified with nanometal oxide and to study the performance…

Extraction and characterization of natural dye from leaves of Lannea coromandelica and application on cotton fabric

The purpose of this study is to extract and characterize a novel natural dye from the leaves of Lannea coromandelica and the extraction with finding ways of dyeing cotton fabric…

A comparative and experimental study to evaluate the use of nanocontainer solutions for removing polymeric coatingsfrom glass artifacts

The purpose of this study is to evaluate the effectiveness of nanocontainer solutions in removing deteriorated and aged polymers commonly used in coating and consolidating…

Pigmented sweetened rose petal crush enriched multi-millet cookies: investigating the physical properties, phytochemistry, molecular and structural transformations

This study aims to investigate the use of rose petals rich in bioactive components possessing several health benefits in the form of pigmented sweetened rose petals crush (P SRP…

In-situ synthesis of SiO2 aerogel/polyethylene terephthalate composite slices and their fibers

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to…

Utilization of agro waste activated carbons as carbon black replacement in electron beam irradiated styrene butadiene rubber composites

This study aims to prepare activated carbon (AC) and activated biochar (BC) from sugarcane bagasse (SCB) can be used as carbon black (CB) replacement for styrene butadiene rubber…

Preparation of multifunctional polypyrrole hydrogel/Fe3O4/calcium alginate composite aerogel with electromagnetic shielding and fire warning performance

This study aims to fabricate a novel electromagnetic interference (EMI) shielding composite aerogel with both thermal insulation and high temperature warning functions.

Superhydrophobic coatings prepared from fluorinated silica nanoparticles and fluororesin: wetability, chemical stability, mechanical durability and water repellency

The purpose of this study is to explore the interfacial adhesion between superhydrophobic coatings FC-X (X = 1%, 2%, 3%, 4% and 5%) and the concrete substrate, along with the…

A wide range of modified alkyd resins based on a new source of dicarboxylic acid as a binder for anticorrosive paint

This paper aims to prepare alkyd protective paint by using modified alkyd with 3,6-dichloro benzo[b]thiophene-2-carbonyl glutamic acid (DCBTGA) as a source of dicarboxylic acid…

Enhancing the functional properties and performance of paper via cellulose nanocrystals and funori loaded onto ZnO NPs

This paper aims to investigate the ability of traditional biopolymers, such as funori or the nanoscale form of cellulose nanocrystals, to consolidate fragile paper and preserve it…

Investigation of process parameters for eco-friendly indigo dyeing of cotton fabric with reducing sugars

The application of indigo dyes in the denim industries has been criticised due to the introduction of non-renewable oxidation products into the environment. Previous studies have…

Phenoxazine-based fluorescence chemosensor for selective detection of cyanide

A highly selective cyanide phenoxazine-based fluorescence chemosensor POH was created to detect cyanide (CN) ions.

Innovations in prosthetic foot design enhancing durability, functionality and comfort through PLA composite filament 3D printing

The number of people with special needs, including citizens and military personnel, has increased as a result of terrorist attacks and challenging conditions in Iraq and other…

Preparation of BiOBr/PVDF photocatalytic membranes for long-term and efficient degradation of organic dyes using phase transition and in situ deposition methods

This study aims to investigate the morphology and physicochemical properties of BiOBr/Polyvinylidene fluoride (PVDF) composite membranes and the differences in the properties of…

Fabrication of thermal insulation sodium alginate/SiO2 composite aerogel with superior radiative cooling function for firefighting clothing

This study aims to evaluate the thermal performance of sodium alginate (SA) aerogel attached to nano SiO₂ and its radiative cooling effect on firefighting clothing without…

Comparison of life cycle assessment for wooden pallet and different plastic pallets based on SimaPro

The study aims to compare and analyze the impact of the commonly used pallets (wooden pallet and plastic pallets), using life cycle assessment (LCA), then provide certain…

Sodium and potassium ferrocyanide derived Prussian blue pigment

This study aims to synthesize Prussian blue {Fe^III₄[Fe^II(CN)₆]₃} pigment by reacting ferric chloride with different ferrocyanides through the same procedure. The influence of the…

Designing an optimised formulation for in situ emulsion polymerization: printing ink production by response surface methodology

Toner is a crucial dry colorant composite used in printing based on the electrophotographic process. The quality of printed images is greatly influenced by the toner production…

Consolidation materials used with illuminated and non-illuminated paper manuscripts and historical leather bindings: a review

This study aims to focus on the main materials used in consolidation processes of illuminated paper manuscripts and leather binding.

Preparation and performance of self-healing polymer cement-based waterproof coating with ion chelator

This study aims to develop a polymer cement-based waterproof coating with self-healing capability to efficiently and intelligently solve the building leakage caused by cracking of…

Experimental exploration of mechanical behaviour of graphene oxide blend polymer nanocomposites

This study aims to evaluate the development of composites made of epoxy (E) resin with different weight percentages of polypropylene (PP) and graphene oxide (Go) to form…

Improving damping characteristics of epoxy by adding copper alloy wastes

The purpose of this study is to get benefits from manufacturing harmful wastes is by using them as a reinforcement with epoxy matrix composite materials to improve the damping…

Sustainable cotton dyeing with reactive dyes in the recycled dyeing wastewater

This paper aims to find a suitable solution to degrade the C.I. Reactive Red 24 (RR24) dyeing wastewater by using sodium persulphate to recycle water and inorganic salts.

Effect of isobornyl acrylate and hexanediol diacrylate on the properties of UV-curable resin developed from suberic acid-derived polyester polyol

This study aims to focus on how reactive diluents with mono- and di-functionalities affect the properties of resin formulation developed from bioderived precursors. A hydroxyethyl…

New insights into the role of color extraction from (Aegle Marmelos leaf) using a non-traditional heating source

Due to herbs and plants’ therapeutic properties and simplicity of availability in nature, humans have used them to treat a variety of maladies and diseases since ancient times…

Synthesis of polymer-based antiviral coating using polyethylene glycol (PEG) and acrylic resin as binder

This paper aims to fabricate a polymer-based polyethylene glycol (PEG) coating with acrylic resin as a binder that can show antiviral activity against the feline coronavirus…

Synthesis and adsorption performance of temperature-sensitive imprinted composite poly (vinylidene fluoride) resin membranes with chitosan modification for selective separation of ReO4−

This study aims to prepare an imprinted composite membrane with grafted temperature-sensitive blocks for the efficient adsorption and separation of rhenium(Re) from aqueous…

Harnessing of carboxy containing starch nanoparticles as an adsorbent for Cd (II) ions and methylene blue from waste water effluent: synthesis, metrological characterization and properties

The novelty addressed here is undertaken by using tailor-made and fully characterized starch nanoparticles (SNPs) having a particle size ranging from 80 to 100 nm with a larger…

Lignosulfonate and glycidyl ether modified urea formaldehyde wood adhesives for interior particleboard production

The purpose of this study is the development of sustainable and low-formaldehyde emission wood adhesive formulations.

Use of carboxymethyl cellulose, Klucel G, gum Arabic and zinc oxide nanoparticles nanocomposite as strength agents for inked papyrus

The purpose of this study is to detect the effect of some natural cellulosic polymers in their nano forms with the addition of zinc oxide nanoparticles on restoring the lost…

Embedding anatase, rutile, and brookite TiO2 nanoparticles to cotton fabric with epoxy silane and comparison of their effects on photodegradation

This study aims to embed anatase, rutile and brookite TiO₂ nanoparticles (NPs) with different crystal phases into cotton fabrics by epoxy silane and to examine the effect of these…

Green encapsulation of textile dyes using lecithin to increase dyeing performance

The purpose of this study is to use liposome technology in the treatment of fabrics textiles because of its efficient energy saving, reducing time and temperature.

Investigation of the effects of self-crosslinking acrylate with TiO2 nanoparticles on cotton denim fabrics

Titanium(IV) oxide nanoparticles (TiO₂ NP) were deposited to cotton denim fabrics using a self-crosslinking acrylate – a polymer dispersion to extend the lifetime of the products…

Advancement in extraction and characterization techniques of natural dyes from dye yielding plants sources: a review

Everyone is extremely concerned about environmental protection and health safety due to the rise in living standards. Plant-derived natural dyes have garnered much industrial…

Multifunctional finishes on photochromic microcapsule-printed cotton fabrics using titanium oxide nanoparticles

This paper aims to study the combination of photochromic microcapsules, which use the ultraviolet (UV) rays for colour changing phenomena, and titanium oxide (TiO₂) nanoparticles…

Preparation of polysulfone/sulfonated polysulfone-SiO2 nanofiltration membrane and its performance characterization

This study aims to optimize the preparation conditions and modify the nanofiltration (NF) membranes to prepare high-performance polysulfone/sulfonated polysulfone composite…

Study on photoluminescence of integrated nano-calcium carbonate (CaCO3) enhanced with dysprosium (Dy) doped calcium borophosphate (CBP) phosphor

There is a strong inducement to develop new inorganic materials to substitute the current industrial pigments, which are known for their poor ultraviolet absorbent and low…

Investigation of TiO2 replacement alternatives for water-based paints using styrene butyl acrylate

Titanium dioxide (TiO₂) has high opacity, high brightness and whiteness, owing to its high refractive index value. It is mainly used in the coating industry and continuous efforts…

Preparation and dispersion properties of polyacrylate copolymer dispersant

The purpose of this paper is to synthesize a polyacrylate-based dispersant with a determined target molecular weight for oily systems and to determine the optimal dispersant level…

Synthesis of novel pyrazolyl quinolinone derivatives and their physicochemical applications on polyester

Eco-friendly polyfunctional ceramic pigments: an approach

The purpose of this study is the synthesis and characterization of a CMYK palette (cyan of Cr-BiVO₄, magenta of Pr-CeO₂, yellow of Bi-(Ce,Zr)O₂ composite and black of YMnO₃) as an…

Multiresponse optimization in amylolytic desizing of viscose fabric in the copresence of ferrous ions and an anionic surfactant

This study aims to investigate the effect of the copresence of ferrous (Fe²⁺) ions and sodium dodecyl sulfate (SDS) on the activity of an amylase enzyme during the desizing of…

Citrate-crosslinked silver nanoparticles impregnation on curcumin-dyed cellulose fabric for potential surgical applications

This study aims to present a sustainable approach in the natural dyeing of cellulose fabric followed by nanosilver finishing through a green crosslinker of citric acid for…

Synthesis of monoazo disperse dyes derived from N-(1-phthalimidyl)-naphthalimides and their dyeing properties on polyester fabrics

This paper aims to synthesize a novel series of monoazo disperse dyes based on N-(1-phthalimidyl)-naphthalimides by coupling with substitute anilines, naphthylamines and naphthol…

Adsorptive investigation of the anticorrosion properties of natural chrysin on carbon steel in acid–chloride system: combined theoretical and experimental approach

Owing to the toxicity, biodegradability, and cost of most corrosion inhibitors, research attention is now focused on the development of environmentally benign, biodegradable…

Dyeing of silk with extract from Coreopsis tinctoria

This study aims to dye silk with natural pigments extract of Coreopsis tinctoria, by treating the fabrics with appropriate mordant under suitable dyeing conditions, to achieve…

Effect of an amine-aldehyde condensate modifier on the thermal and mechanical properties of fiber-reinforced epoxy composites

The manufacture of polymer composites with a lower environmental footprint requires incorporation of sustainably sourced components. In addition, the incorporation of novel…

An amperometric sensor based on gamma-irradiated PANI-ZnO-NiO nanocomposite thin films for Escherichia coli detection in water

Regular monitoring of bacteria, especially Escherichia coli, in wastewater is crucial to ensure the maintenance of public health. Amperometric detection proves to be a fast…

Natural and synthetic drugs as eco-friendly and sustainable corrosion inhibitors for metals: a review

Corrosion is a major concern for many industries that use metals as structural or functional materials, and the use of corrosion inhibitors is a widely accepted strategy to…

Role of intra-ply hybridization and nano reinforcement on crack growth of epoxy

Epoxy resins are widely used in a variety of engineering applications, including composite wind turbine blades used in the renewable energy industry, highly complex structural…

Studying the properties of polypyrrole-montmorillonite polyacrylic-urethane nanocomposite coatings: the role of an eco-friendly ionic liquid

This paper aims to achieve an anti-corrosive coating via uniform dispersion of nanoclay particles (montmorillonite) and polypyrrole (PPy) as a conductive polymer as well as their…

Improving the properties of gap-filling materials for pottery artifacts with nano silica and nano kaolinite polymeric nanocomposites

The study aims to assess the efficiency of nanocomposite to improve the properties of gap-filling materials for pottery artifacts.

Preparation of alcohol-resistant ink using polyester resin for thermal transfer ribbon

The purpose of this study is to prepare thermal transfer ribbons with good alcohol resistance.

Development of protective coating system using natural rubber – acrylic polyol resin for mild steel

The purpose of this study is to develop a protective coating system on mild steel panel incorporating epoxidized natural rubber with acrylic polyol resin.

A state-of-the-art review on advanced ceramic materials: fabrication, characteristics, applications, and wettability

The purpose of this study is to prepare a state-of-the-art review on advanced ceramic materials including their fabrication techniques, characteristics, applications and…

Using nano clay and graphite as low-cost, sustainable adsorbents to remove dye toxins from waste water

This study aims to observe the coloring efficacy of graphite (G) and nano bentonite clay (BCNPs) on the adsorption of Basic Blue 5 dye from residual dye bath solution.

Glucose-lignin-based phenolic resin: an environmentally friendly low-formaldehyde wood adhesive

This study aims to prepare a low-formaldehyde and environmentally friendly glucose-lignin-based phenolic resin.

Harnessing of newly tailored poly (acrylonitrile)-starch nanoparticle graft copolymer for copper ion removal via oximation reaction as a calorimetric sensor

Herein, this study aims to use our recently tailored and fully characterized poly acrylonitrile (AN)-starch nanoparticle graft copolymer having 60.1 graft yield percentage as a…

Corrosion inhibition of aluminium in 0.3 M HCl using starch mucor in potassium iodide as inhibitor

The purpose of this study is to investigate starch mucor (SM) in potassium iodide (KI) as corrosion inhibitor of aluminium in hydrochloric acid (HCl) medium.

Synthesis, metrological characterization, and dyeing properties of surface grafted viscose fabric using peroxydisulfate/ferrous II ions redox pair

The purpose of this study is to undertake surface graft copolymerization of viscose fabric via altering its fibrous properties by using acrylic acid (AA) as a carboxyl-containing…

Development of imine-azo-dyes derived from vanillin and salicylaldehyde for pH-sensing in smart packaging

This study aims to describe the design and synthesis of two novel azo and imine chromophores-based dyes derived from two different aldehydes with intramolecular colour matching…

Synthesis of butylated benzo-amino resin by solid formaldehyde one-step-two-stage method and its application in high solid content coatings

In this study, solid formaldehyde, benzoguanamine and butanol were used to synthesize butylated benzo-amino resin by one-step-two-stage method.

Analytical methods for evaluating the state of preservation of a historical manuscript dating back to the 15th century AD in Al-Azhar Library – Egypt

This study aims to evaluate the state of preservation of one of the most famous manuscripts dated back to the 15th century using some analytical techniques to identify the…

Quasiperiodic graph model of rubber elasticity in double-network gels undergoing mechanochemical coupling

The purpose of this paper is to study the mechanochemical effect and self-growth mechanism of double-network (DN) gel and to provide a quasiperiodic model for rubber elasticity.

TiO2/PDMS hybrid system for constructing superhydrophobic surfaces of cotton fabrics with resistance to droplet adhesion

This study aims to produce a superhydrophobic fabric surface with a layered rough structure and which are resistant to droplet adhesion. Polydimethylsiloxane (PDMS) systems doped…

New nutrients evaluation in Spirulina maxima growth for phycocyanin, carbohydrate, and biochar production

The purpose of this study is to investigate the influence of light intensity and sources of carbon and nitrogen on the cultivation of Spirulina maxima.

Fabrication of CNTs-reinforced poly(vinyl alcohol) nanocomposite film with tailored structural, surface chemical and optical properties

This study aims to fabricate multiwalled carbon nanotubes (MWCNTs)-mediated polyvinyl alcohol (PVA) composite films using the solution casting approach.

An experimental study for using nano-alumina to improving mechanical properties of epoxy resin for assembling glass artifacts

This study aims to assess the efficacy of nano-alumina (nano-Al₂O₃) in improving the performance of epoxy adhesives used to assemble archaeological glass. The conservators face a…

Citric-acid anchored silver nano-finishing of commercially dyed denim fabric for potential non toxic antibacterial surgical gowns

Present study aimed to nanosilver-treat some commercially dyed denim fabric using an eco-friendly cross-linker of citric acid for possible application in the fabrication of…

Physicochemical characterization of titanium dioxide inks for digital textile printing based on newly developed polyurethane prepolymers

This paper aims to study the physical and chemical characteristics of inkjet titanium dioxide inks for cotton fabric digital printing.

Corrosion resistance of graphene/basalt flake modified waterborne epoxy zinc-rich primer

The purpose of this study is to evaluate the effect of graphene, basalt flakes and their synergy on the corrosion resistance of zinc-rich coatings. As the important heavy-duty…

Preparation of cool composite pigment by the layer-by-layer assembling of phthalocyanine green on the surface of rutile TiO2

This study aims to fabricate a cool phthalocyanine green/TiO₂ composite pigment (PGT) with high near-infrared (NIR) reflectance, good color performance and good heat-shielding…

Synthesis of modified poly(ester-amide) and alkyd resins based on phenolic and Schiff base compounds to study their biological and insecticide activity for surface coating applications

This paper aims to investigate the prepared modified alkyd and poly(ester-amide) (PEA) resins as antimicrobial and insecticide binders for surface coating applications.

Hygroscopic analysis and tribo-mechanical characterization of biocompatible PP/PA6/Boron sesquioxide composite

The purpose of this study is to look into the hygroscopic and tribo-mechanical properties of a polypropylene/polyamide-6 (PP/PA6) blend and a PP/PA6/Boron sesquioxide composite.

Isolation and chemistry of plant pigments

This paper aims to critically review the isolation and chemistry of plant pigments.

Harnessing the potential of regenerated bamboo knitted fabrics in development of eco-friendly masks

Face masks are the most recommended precautionary measure since the emergence of SARS-CoV-2 since 2020 and the most useful PPE against this virus and its variants so far. This…

Preparation and characterization of PSF/SPSF blended ultrafiltration membranes

This paper aims to improve the permeability and antifouling of polysulfone (PSF) ultrafiltration membranes, the PSF matrix was modified by incorporating sulfonated polysulfone…

Color change kinetics of lac dye as influenced by some food spoilage metabolites: validation for spoilage monitoring of strawberries

The purpose of this paper was to study the color change kinetics of lac dye in response to aldehydes, carbon dioxide and other food spoilage metabolites for its potential…

Sustainable technique of dyeing bio-degradable polyester using henna extract

The purpose of this study is to highlight the threats related to the utilization of synthetic fibers. Volatile organic compounds, particulates and acid gases are released during…

Modelling of Basic Yellow 28 adsorption onto activated carbon: batch and continuous process

This study aims to model and investigate Basic Yellow 28 (BY28) adsorption onto activated carbon in batch and continuous process.

The role of resin in optimizing the performance and printing properties of water-based inkjet inks for food packaging

This study aims to investigate the influence of commercially available resins in water-based magenta pigment inkjet ink formulations on the properties of ink printability and the…

Study of transmission and reflection of hydrophilic transparent nano-titanium dioxide coating

The paper aims to design the optimum formulation of the nano-titanium dioxide (TiO2) hydrophilic coating system using the synthetic polypropylene glycol (PPG), which can create…

Citric acid-crosslinked nanosilver finishing of indigo-dyed denim for potential surgical gowns

This paper aims to develop an indigo-dyed denim fabric treated with a nanosilver colloid in the presence of a natural crosslinker of citric acid for possible surgical gown…

Comparison of life cycle assessment for takeout meal packaging (kraft paper bowl and plastic bowl) based on Simapro

This study aims to compare and analyze the impact of the commonly used takeout packing (Kraft paper bowl and plastic bowl) through life cycle assessment, then certain suggestions…

The effect of cold glow discharge nitrogen plasma treatment of sisal fiber (Agave Sisalana) on sisal fiber reinforced epoxy composite

The incompatibility of natural fibers with polymer matrices is one of the key obstacles restricting their use in polymer composites. The interfacial connection between the fibers…

Identification of natural dyes with halochromic properties and their potential use as food spoilage indicators

The purpose of this research is to identify and investigate some natural dyes with halochromic properties for potential use as food spoilage indicators to reduce waste and curve…

A comparative study of corrosion resistance of epoxy-based coating incorporated chitosan, silica and hybrid compound of chitosan/silica on mild steel

This study aims to propose that the corrosion resistance of the neat epoxy coating can be further enhanced by incorporating reinforcing agents.

Eco-friendly polymer composite films based on waste polyvinyl chloride/sunflower seed cake for antimicrobial and antistatic applications

This study aims to get rid of non-degradable polyvinyl chloride (PVC) waste as well as sunflower seed cake (SSC) waste by preparing eco-friendly composites from both in different…