Search results

This study aims to investigate the interaction of independent variables [Reynolds number (Re), thermal power and the number of ball grid array (BGA) packages] and the relation of the variables with the responses [Nusselt number ((Nu) ¯ ), deflection/FPCB’s length (d/L) and von Mises stress]. The airflow and thermal effects were considered for optimizing the Re of various numbers of BGA packages with thermal power attached on flexible printed circuit board (FPCB) for optimum cooling performance with least deflection and stress by using the response surface method (RSM).

Flow and thermal effects on FPCB with heat source generated in the BGA packages have been examined in the simulation. The interactive relationship between factors (i.e. Re, thermal power and number of BGA packages) and responses (i.e. deflection over FPCB length ratio, stress and average Nusselt number) were analysed using analysis of variance. RSM was used to optimize the Re for the different number of BGA packages attached to the FPCB.

It is important to understand the behaviour of FPCB when exposed to both flow and thermal effects simultaneously under the operating conditions. Maximum d/L and von Misses stress were significantly affected by all parametric factors whilst (Nu)¯ is significantly affected by Re and thermal power. Optimized Re for 1–3 BGA packages with maximum thermal power applied has been identified as 21,364, 23,858 and 29,367, respectively.

This analysis offers a better interpretation of the parameter control in FPCB with optimized Re for the use of force convection electronic cooling. Optimal Re could be used as a reference in the thermal management aspect in designing the BGA package.

This research presents the parameters’ effects on the reliability and heat transfer in FPCB design. It also presents a method to optimize Re for the different number of BGA packages attached to increase the reliability in FPCB’s design.

The purpose of the present study was to review the thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components (SMCs). The topics of the review include challenges in modelling of the reflow soldering process, optimization and the future challenges in the reflow soldering process. Besides, the numerical approach of lead-free solder reliability is also discussed.

Lead-free reflow soldering is one of the most significant processes in the development of surface mount technology, especially toward the miniaturization of the advanced SMCs package. The challenges lead to more complex thermal responses when the PCB assembly passes through the reflow oven. The virtual modelling tools facilitate the modelling and simulation of the lead-free reflow process, which provide more data and clear visualization on the particular process.

With the growing trend of computer power and software capability, the multidisciplinary simulation, such as the temperature and thermal stress of lead-free SMCs, under the influenced of a specific process atmosphere can be provided. A simulation modelling technique for the thermal response and flow field prediction of a reflow process is cost-effective and has greatly helped the engineer to eliminate guesswork. Besides, simulated-based optimization methods of the reflow process have gained popularity because of them being economical and have reduced time-consumption, and these provide more information compared to the experimental hardware. The advantages and disadvantages of the simulation modelling in the reflow soldering process are also briefly discussed.

This literature review provides the engineers and researchers with a profound understanding of the thermo-mechanical challenges of reflowed lead-free solder joints in SMCs and the challenges of simulation modelling in the reflow process.

The unique challenges in solder joint reliability, and direction of future research in reflow process were identified to clarify the solutions to solve lead-free reliability issues in the electronics manufacturing industry.

The purpose of this study is to investigate heat transfer and deformation of flexible printed circuit board (FPCB) under thermal and flow effects by using fluid structure interaction. This study simulate the electronic cooling process when electronic devices are generating heat during operation at FPCB under force convection.

The thermal and flow effects on FPCB with attached ball grid array (BGA) packages have been investigated in the simulation. Effects of Reynolds number (Re), number of BGA packages attached, power supplied to the BGA packages and size of FPCB were studied. The responses in the present study are the deflection/length of FPCB (δ/L) and Nusselt number (Nu).

It is important to consider both thermal and flow effects at the same time for understanding the characteristic of FPCB attached with BGA under operating condition. Empirical correlation equations of Re, Prandtl number (Pr), δ/L and Nu have been established, in which the highest effect is of Re, followed by Pr and δ/L. The δ/L and Nu¯ were found to be significantly affected by most of the parametric factors.

This study provides a better understanding of the process control in FPCB assembly.

This study provides fundamental guidelines and references for the thermal coupling modelling to address reliability issues in FPCB design. It also increases the understanding of FPCB and BGA joint issues to achieve high reliability in microelectronic design.

The purpose of this paper is to present a three-dimensional finite volume-based analysis on the effects of propeller blades on fountain flow in a wave soldering process and performs an experimental validation.

Solder pot models with various numbers of propeller blades were developed and meshed by using hybrid elements and simulated by using the FLUENT fluid flow solver. The characteristics of the fountain, such as flow profile, velocity vector, filling time, and fountain advancement, were investigated. Molten solder (Sn63Pb37) material, a temperature of 250°C, and a propeller speed of 830 rpm were applied in the simulation. The predicted results were validated by the experimental fountain profile.

The use of a six-blade propeller in a solder pot increased the fountain thickness profile and reduced the filling time. Moreover, a six-blade propeller design resulted in a stable fountain profile and was considered the best choice for current wave soldering processes.

This study provides a better understanding of the effects of propeller blades on the fountain flow in the wave soldering process.

The study explores the fountain flow behavior and provides a reference to the engineers and designers in order to improve the fountain flow of the wave soldering.

The aim of this study is to investigate the effects of offset angle in wave soldering by using thermal fluid structure interaction modeling with experimental validation.

The authors used a thermal coupling approach that adopted mesh-based parallel code coupling interface between finite volume-and finite element-based software (ABAQUS). A 3D single pin-through-hole (PTH) connector with five offset angles (0 to 20°) on a printed circuit board (PCB) was built and meshed by using computational fluid dynamics preprocessing software called GAMBIT. An implicit volume of fluid technique with a second-order upwind scheme was also applied to track the flow front of solder material (Sn63Pb37) when passing through the solder pot during wave soldering. The structural solver and ABAQUS analyzed the temperature distribution, displacement and von Mises stress of the PTH connector. The predicted results were validated by the experimental solder profile.

The simulation revealed that the PTH offset angle had a significant effect on the filling of molten solder through the PCB. The 0° angle yielded the best filling profile, filling time, lowest displacement and thermal stress. The simulation result was similar to the experimental result.

This study provides a better understanding of the process control in wave soldering for PCB assembly.

This study provides fundamental guidelines and references for the thermal coupling method to address reliability issues during wave soldering. It also enhances understanding of capillary flow and PTH joint issues to achieve high reliability in PCB assembly industries.

Reflow soldering is one of the most significant factors in determining solder joint defect rate. This study aims to introduce an innovative approach for optimizing the multiple performances of the reflow soldering process.

This study aims to minimize the solder joint defect rate of a ball grid array (BGA) package by using the grey‐based Taguchi method. The entropy measurement method was employed together with the grey‐based Taguchi method to compute for the weights of each quality characteristic. The Taguchi L18 orthogonal array was performed, and the optimal parameter settings were determined. Various factors, such as slope, temperature, and reflow profile time, as well as two extreme noise factors, were considered. The thermal stress, peak temperature, reflow time, board‐ and package‐level temperature uniformity were selected as the quality characteristics. These quality characteristics were determined using the numerical method. The numerical method comprises the internal computational flow that models the reflow oven coupled with the structural heating and cooling models of the BGA assembly. The Multi‐physics Code Coupling Interface was used as the coupling software.

The analysis of variance results reveals that the cooling slope was the most influential factor among the multiple quality characteristics, followed by the soaking temperature and the peak temperature. Experimental confirmation test results show that the performance characteristics improved significantly during the reflow soldering process.

The proposed approach greatly reduces solder joint defects and enhances solutions to lead‐free reliability issues in the electronics manufacturing industry.

The findings provide new guidelines to the optimization method which are very useful for the accurate control of the solder joint defect rate within components and printed circuit board (PCB) which is one of the major requirements to achieve high reliability of electronic assemblies.

This study aims to investigate the NiO nano-reinforced solder joint characteristics of ultra-fine electronic package.

Lead-free Sn-Ag-Cu (SAC) solder paste was mixed with various percentages of NiO nanoparticles to prepare the new form of nano-reinforced solder paste. The solder paste was applied to assemble the ultra-fine capacitor using the reflow soldering process. A focussed ion beam, high resolution transmission electron microscopy system equipped with energy dispersive X-ray spectroscopy (EDS) was used in this study. In addition, X-ray inspection system, field emission scanning electron microscopy coupled with EDS, X-ray photoelectron spectroscopy (XPS) and nanoindenter were used to analyse the solder void, microstructure, hardness and fillet height of the solder joint.

The experimental results revealed that the highest fillet height was obtained with the content of 0.01 Wt.% of nano-reinforced NiO, which fulfilled the reliability requirements of the international IPC standard. However, the presence of the NiO in the lead-free solder paste only slightly influenced the changes of the intermetallic layer with the increment of weighted percentage. Moreover, the simulation method was applied to observe the distribution of NiO nanoparticles in the solder joint.

The findings are expected to provide a profound understanding of nano-reinforced solder joint’s characteristics of the ultra-fine package.

This paper aims to investigate the thermal fluid–structure interactions (FSIs) of printed circuit boards (PCBs) at different component configurations during the wave soldering process and experimental validation.

The thermally induced displacement and stress on the PCB and its components are the foci of this study. Finite volume solver FLUENT and finite element solver ABAQUS, coupled with a mesh-based parallel code coupling interface, were utilized to perform the analysis. A sound card PCB (138 × 85 × 1.5 mm3), consisting of a transistor, diode, capacitor, connector and integrated circuit package, was built and meshed by using computational fluid dynamics pre-processing software. The volume of fluid technique with the second-order upwind scheme was applied to track the molten solder. C language was utilized to write the user-defined functions of the thermal profile. The structural solver analyzed the temperature distribution, displacement and stress of the PCB and its components. The predicted temperature was validated by the experimental results.

Different PCB component configurations resulted in different temperature distributions, thermally induced stresses and displacements to the PCB and its components. Results show that PCB component configurations significantly influence the PCB and yield unfavorable deformation and stress.

This study provides PCB designers with a profound understanding of the thermal FSI phenomenon of the process control during wave soldering in the microelectronics industry.

This study provides useful guidelines and references by extending the understanding on the thermal FSI behavior of molten solder for PCBs. This study also explores the behaviors and influences of PCB components at different configurations during the wave soldering process.

This paper aims to investigate the characteristics of ultra-fine lead-free solder joints reinforced with TiO₂ nanoparticles in an electronic assembly.

This study focused on the microstructure and quality of solder joints. Various percentages of TiO₂ nanoparticles were mixed with a lead-free Sn-3.5Ag-0.7Cu solder paste. This new form of nano-reinforced lead-free solder paste was used to assemble a miniature package consisting of an ultra-fine capacitor on a printed circuit board by means of a reflow soldering process. The microstructure and the fillet height were investigated using a focused ion beam, a high-resolution transmission electron microscope system equipped with an energy dispersive X-ray spectrometer (EDS), and a field emission scanning electron microscope coupled with an EDS and X-ray diffraction machine.

The experimental results revealed that the intermetallic compound with the lowest thickness was produced by the nano-reinforced solder with a TiO₂ content of 0.05 Wt.%. Increasing the TiO₂ content to 0.15 Wt.% led to an improvement in the fillet height. The characteristics of the solder joint fulfilled the reliability requirements of the IPC standards.

This study provides engineers with a profound understanding of the characteristics of ultra-fine nano-reinforced solder joint packages in the microelectronics industry.

The findings are expected to provide proper guidelines and references with regard to the manufacture of miniaturized electronic packages. This study also explored the effects of TiO₂ on the microstructure and the fillet height of ultra-fine capacitors.

The purpose of the study is to investigate the spatial aspects of underfill flow during the flip-chip encapsulation process, for instance, meniscus evolution and contact line jump (CLJ). Furthermore, a spatial-based void formation mechanism during the underfill flow was formulated.

The meniscus evolution of underfill fluid subtended between the bump array and the CLJ phenomenon were visualized numerically using the micro-mesh unit cell approach. Additionally, the meniscus evolution and CLJ phenomenon were modelled analytically based on the formulation of capillary physics. Meanwhile, the mechanism of void formation was explained numerically and analytically.

Both the proposed analytical and current numerical findings achieved great consensus and were well-validated experimentally. The variation effects of bump pitch on the spatial aspects were analyzed and found that the meniscus arc radius and filling distance increase with the pitch, while the subtended angle of meniscus arc is invariant with the pitch size. For larger pitch, the jump occurs further away from the bump entrance and takes longer time to attain the equilibrium meniscus. This inferred that the concavity of meniscus arc was influenced by the bump pitch. On the voiding mechanism, air void was formed from the air entrapment because of the fluid-bump interaction. Smaller voids tend to merge into a bigger void through necking and, subsequently, propagate along the underfill flow.

The microscopic spatial analysis of underfill flow would explain fundamentally how the bump design will affect the macroscopic filling time. This not only provides alternative visualization tool to analyze flow pattern in the industry but also enables the development of accurate analytical filling time model. Moreover, the void formation mechanism gave substantial insights to understand the root causes of void defects and allow possible solutions to be formulated to tackle this issue. Additionally, the microfluidics sector could also benefit from these spatial analysis insights.

Spatial analysis on underfill flow is scarcely conducted, as the past research studies mainly emphasized on the temporal aspects. Additionally, this work presented a new mechanism on the void formation based on the fluid-bump interaction, in which the formation and propagation of micro-voids were numerically visualized for the first time. The findings from current work provided fundamental information on the flow interaction between underfill fluid and solder bump to the package designers for optimization work and process enhancement.