Industrial Lubrication and Tribology
Covers all automotive and industrial applications of lubricants
Issue(s) available: 610 – From Volume: 1 Issue: 1, to Volume: 76 Issue: 10
Volume 76
Volume 75
Volume 74
Volume 73
Volume 72
Volume 71
Volume 70
Volume 69
Volume 63
Volume 58
Volume 23
Volume 22
Volume 21
Volume 20
Volume 19
Volume 18
Volume 17
Volume 16
Volume 15
Volume 14
Volume 13
Volume 12
Volume 11
Volume 10
Volume 9
Volume 8
Volume 7
Volume 6
Volume 5
Volume 4
Volume 3
Volume 2
Experimental study on the influence of flexible structure and gas supply method on the characteristics of aerostatic tilting-pad bearing
LingFeng Huang, Liming Zhu, Shuxiang Yi, Xiaohan Zhang, Xiaojing Wang, Xiangyu LiThis paper aims to propose novel flexible structure-supported tilting-pad aerostatic bearings and to improve operational stability and vibration reduction of aerostatic bearings.
Effect of suspended particles on erosion characteristics of impeller steels utilizing combined CFD and DOE approach
Gurmeet SinghThe process of conveyance of solid–liquid mixtures poses a significant challenge due to the considerable wear and tear experienced by critical components. This issue not only…
An analytical approach to incomplete spherical conformal contact: application on self-lubricating spherical plain bearings
Yahong Xue, Dongzhuang KangContact pressure is a critical factor that significantly influences the wear of self-lubricating spherical plain bearings. The purpose of this paper is to address the issue of…
Study on influence of friction conditions on the friction and wear performance of high-speed rail brake materials under high humidity environment
Siyuan DingUsing the multifunctional friction and wear testing machine independently developed by the research group, the friction and wear tests of different friction conditions (contact…
The effect of surface roughness and carburized depth on wear resistance in 16MnCr5 case hardening steel
Celalettin Baykara, Enver AtikToday, wear and tear is a metaphor whose cost cannot be ignored by real sector. For this reason, many sectoral and academic studies are carried out to minimize the wear effect…
Leakage prediction approach and influencing factor analysis from seal test
Ran Gong, Jinxiao Li, Jin Xu, He Zhang, Huajun CheLeakage serves as a core indicator of sealing performance degradation, particularly under high-speed and heavy-duty operational where increased leakage is common. Within…
Oleylamine-grafted carbon nanoparticles as the friction-reducing and anti-wear additives of aviation lubricating oils
Xiang Liu, Xinghai Cheng, Pengyu Feng, Jing Li, Zhongping Tang, Jiangbing Wang, Yonggang Chen, Hongjie Zhu, Hengcheng Wan, Lei ZhangThis paper aims to try to develop new, environmentally friendly and efficient lubricating additives; study the compatibility of carbon-based additives with different base oils…
Analytical study on deposits of the aircraft engine piston
Lei Zhang, Zhe Ma, Jing Li, Jiangbing Wang, Xin Sun, Yong ZhaoThis study aims to provide data references for deposit cleaning, fuel formulation and lubricant formulation.
Effect of surface sector or Fibonacci-like microgrooved top foil on the performance of gas foil conical bearing
Hongyang Hu, Huijun Wu, Jichao Wang, Jiamin LiuTo enhance the load capacity and dynamic characteristics of gas foil conical bearings (GFCBs), two kinds of microgrooves (sector and Fibonacci-like shape) are arranged on the top…
Optimum selection of nature-inspired texture pattern for cutting tool surface using an integrated multi-criteria decision-making approach: a comparative analysis
Dheeraj Lal Soni, Venkata Swamy Naidu Neigapula, Jagadish JagadishThis paper aims to focus on the selection of an appropriate nature-inspired texture pattern for cutting tool tribological surface. The selection process uses the recognized skin…
Wheel wear of mountain metro vehicles with complex line conditions
Yayun Qi, Peng Ao, Maorui Hou, Ailong ZhangMountain metro vehicles have unique wheel wear characteristics due to the complex flat and longitudinal lines. With a combination of flat and longitudinal curved tracks, the…
Study on oil film spreading characteristics on the jet lubricating tooth surface of aviation herringbone gear
Xiaomeng Chu, Yali Liu, Zhongze ShangDuring the oil lubrication process of aviation herringbone gears, lubricating oil is injected into and spreads around the tooth surface. Its spreading characteristics directly…
Study on the relationship between high temperature oxidation and temperature rise rate of engine oil
Lei Wei, Pan Xie, Jing Guang Hu, Zhen Hao Zeng, Pei Yang, Feihui Yang, Jia Jun He, Song ChenThe purpose of this paper is to study the relationship between high temperature oxidation and temperature rise rate of engine oil attempted to explore a new indicator to evaluate…
High-speed turning of AISI 4340 alloy steel using carbide tools in a sustainable minimum quantity lubrication environment
Saima Yaqoob, Jaharah A. Ghani, Nabil Jouini, Shalina Sheik Muhamad, Che Hassan Che Haron, Afifah JuriThis study aims to investigate the machining performance of CVD-coated carbide tools by considering most crucial machinability aspects: cutting force, tool life, surface roughness…
Lubrication mechanism analysis of textures in journal bearings using CFD simulations
Yujun Wang, Georg Jacobs, Shuo Zhang, Benjamin Klinghart, Florian KönigThis paper aims to study the lubrication mechanism of textured journal bearings.
Research on wheel wear evolution of inside axlebox metro vehicles
Yayun Qi, Huanyun Dai, Peng Ao, Xiaolu Cui, Wenhui MaoAxleboxes are an important structure that connects the wheelset with the bogie frame. Inside axlebox bogies have lower wheelset yaw angle stiffness and better curve-passing…
Analysis of erosion and sealing characteristics of V-regulating ball valves for coal chemical industry
Weizheng Zhang, Wenbin Huang, Hua Lin, Jingwei LiuThis study aims to research the erosion wear characteristics and sealing performance of V-regulating ball valve in coal chemical process pipelines, which provides a theoretical…
Tribological performance of used engine oil treated with cement and celite adsorbents by solvent extraction-adsorption method
Alper UğurAs lubricating oils are used, their performance deteriorates and they become contaminated. The purpose of this paper is to investigate the lubrication performance of reclaimed…
Movement behavior of oil droplet on porous surfaces under the influence of orifice structure
Guotao Zhang, Zan Zhang, Zhaochang Wang, Yanhong Sun, Baohong Tong, Deyu TuThe lubricating fluid stored in the porous matrix will spontaneously exude to supplement the lubricating film in the damaged area, thus ensuring the long-term self-lubricating…
Effect of composite microtextures on the tribological properties of triangular guide rails
Kexin Ma, Jianxin Deng, Yichen Bao, Zhihui Zhang, Junyan WangLiquid-assisted laser surface texturing technology was used to create composite microtextures on triangular guide rail surfaces to enhance their tribological properties.
Interfacial friction evolution between DLC film and sealing NBR on the plunger of fracturing pump based on molecular dynamics simulation
Yunhai Liu, Penghui Xu, Xiaohua Zhu, Ligao Liu, Bo Li, Qingquan LiTwo friction models of Fe-Fe and Diamond-like carbon (DLC)-Fe were established by molecular dynamics (MD) method to simulate the friction behavior of traditional fracturing pump…
Effect of macro- and micro-morphology on fluid film properties based on plasto-elastohydrodynamic lubrication
Tianci Wang, Yan Lu, Hao Zhang, Jianxi Liu, Yunfei Zheng, Fuquan TuThe developed plasto-elastohydrodynamic lubrication (PEHL) model is used to demonstrate the permanent change of macro morphology by critical high local stress at micro asperities…
Evaluation of cylinder liner surfaces from a heavy-duty diesel engine run in dynamometer bench test with hBN as nano additive in the lubricant
Pedro Santos, Amilton Sinatora, Roberto SouzaGiven the current challenges for improving the tribological behavior in automotive engines, which require lubricants that adapt to different operating conditions through…
The performance monitoring system for a hydrostatic turntable: an improved intelligent algorithm based on the IPSO-NN model
Yongsheng Zhao, Jiaqing Luo, Ying Li, Caixia Zhang, Honglie MaThe combination of improved PSO (IPSO) algorithm and artificial neural network (ANN) model for intelligent monitoring of the bearing performance of the hydrostatic turntable.
Effect of load on the tribological properties of Si3N4-based composite with N-GQDs
Wei Chen, Yucheng Ma, Xingyu Liu, Enguang Xu, Wenlong Yang, Junhong Jia, Rui Lou, Chaolong Zhu, Chenjing Wu, Ziqiang ZhaoThe purpose of this paper is to improve the mechanical and tribological properties of Si3N4 ceramics and to make the application of Si3N4 ceramics as tribological materials more…
Influence of the steel disk on the NVH behavior of industrial wet disk clutches
Patrick Strobl, Katharina Voelkel, Thomas Schneider, Karsten StahlIndustrial drivetrains use wet disk clutches for safe and reliable shifting. Advances over the past decades regarding the formulation of lubricants and the composition of friction…
Study on milling surface quality of superalloy GH4145
Jinfu Shi, Qi GaoThis study aims to reveal the influence of milling process parameters on the surface roughness and morphology of superalloy GH4145.The groove milling mechanism and surface quality…
The effect of friction characteristics on electromagnetic impact deformation mechanism of 2A10 aluminum alloy bars
Xu Zhang, Kangjie Tang, Yingyu Wang, Dongying DongThe purpose objective of this study is to identify the friction coefficient and friction effect in electromagnetic upsetting (EMU) high-speed forming process.
Friction and wear properties of textured surface for bearing steel with mango-shaped micro geometries
Qiang Xiao, Liu Yi-Cong, Yue-Peng Zhou, Zhi-Hong Wang, Sui-Xin Fan, Jun-Hu Meng, Junde GuoGiven the current friction and wear challenges faced by automobile parts and bearings, this study aims to identify a novel texture for creating anti-friction and wear-resistant…
Low-SAPS additives for lubrication in next-generation vehicles
Xin He, Christelle Chretien, Thomas Weathers, Celine Burel, Guillaume Gody, Olivier BackThe purpose of this study is to create sustainable additives for future vehicles, characterized by low levels of sulfated ash, sulfur and phosphorus (SAPS) or even SAPS-free…
Nonlinear dynamic analysis of water-lubricated textured journal bearings with cavitation effect
Xiuwei Li, XingYang Li, Guokun Zhang, Yu Wang, Qinglei Liu, Qiang LiThe purpose of this paper is to investigate the effects of different surface structures, dimensional parameters and cavitation models on the lubrication characteristics of…
Influence of operating parameters on the silt erosion performance of bare and coated SS304 steel
Rajesh Kumar, Satish Kumar, Deepa MudgalThe purpose of this paper is to investigate the silt erosion performance of Bare, 75%Cr2O3 + 25%Al2O3 and 85%Cr2O3 + 15Al2O3-coated SS304 under various control parameters such as…
Investigating fretting wear mechanisms in Ti-6Al-4V: insights from residual stress and equivalent plastic strain analysis
Liwen Feng, Xiangyan Ding, Yinghui Zhang, Ning Hu, Xiaoyang BiThe study delves into the influence of wear cycles on these parameters. The purpose of this paper is to identify characteristic patterns of σRS and εPEEQ that discern varying wear…
Predicting friction coefficient of textured 45# steel based on machine learning and analytical calculation
Zhenshun Li, Jiaqi Li, Ben An, Rui LiThis paper aims to find the best method to predict the friction coefficient of textured 45# steel by comparing different machine learning algorithms and analytical calculations.
Probing the effect of displacement on electrical contact tribological behavior at the risk frequency of nuclear safety DCS equipment
Dongwei Wang, Faqiang Li, Yang Zhao, Fanyu Wang, Wei JiangThis paper aims to study the tribological characteristics of the electrical contact system under different displacement amplitudes.
Revealing the tribological mechanism of synergistic effect between MoDTC and P-containing additives in aluminum-based grease
Hui Zhao, Shunzhen Ren, Zhengbo Zhong, Zhipeng Li, Tianhui RenThis study aims to reveal the tribological mechanism of synergistic effect between MoDTC and P-containing additives in aluminum-based grease.
ISSN:
0036-8792e-ISSN:
1758-5775ISSN-L:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz
Further Information
