Industrial Lubrication and Tribology: Volume 70 Issue 7
Covers all automotive and industrial applications of lubricants
Table of contents
Experimental research on frictional resistance of smart isolation tool during maintenance operation in offshore pipeline
Kang Zhang, Xiaoxiao Zhu, Shimin Zhang, Qingxin Ding, Zichen HePipeline maintenance technology using smart isolation tool is becoming more widely used in the global scope. This paper aims to investigate the effects of parameters on the…
Experimental investigations of force transmission characteristics in granular flow lubrication
Fanjing Meng, Kun Liu, Tao QinGranular lubrication is a new lubrication method and can be used in extreme working conditions; however, the obstacle of force transmission characteristics needs to be urgently…
Tribological properties of ionic liquids for steel/aluminum, steel/copper and steel/Si3N4 ceramic contacts under boundary lubrication
Hao-bo Zhang, Hui Chen, Xiao-ning Shi, Xiong Liu, Guo-jian DuanThe purpose of this paper is to study the influence of alkyl chain length and kind of anions of ionic liquids on the tribological properties with different materials as friction…
Analysis of influencing factors on oil film shear torque of hydro-viscous drive
Hongwei Cui, Zisheng Lian, Long Li, Qiliang WangThe hydro-viscous drive (HVD) has been widely used in fan transmission in vehicles, fans, and scraper conveyors for step-less speed regulating and soft starting. It is an…
The effect of boronizing heat treatment on the slurry erosion of AISI 5117
Yasser Abdelrhman, Ahmed Abouel-Kasem, Karam Emara, Shemy AhmedThis paper aims to clarify the relationship between the slurry erosion and one of the case hardening treatments, i.e. boronizing in this study, for AISI-5117 steel alloy…
Modeling and optimization for fly ash reinforced bronze-based composite materials using multi objective Taguchi technique and regression analysis
Hüsamettin Kus, Gokhan Basar, Funda KahramanThis paper aims to investigate the effect of fly ash reinforcement ratio (Rr) and sintering temperature (T) on the transverse rupture strength (TRS), hardness and density of fly…
Online condition monitoring for detection of crack in the shaft using vibration analysis method
Bhumi Ankit Shah, Dipak P. VakhariaThe purpose of this study is to identify the crack in the shaft at incipient stage. Transverse crack is the most common type of crack found on the periphery of the shaft. The…
Investigation of squeeze film performance in rough parallel circular discs by ferro-fluid couple stress lubricant considering effects of rotational inertia
Maghsood DaliriThe purpose of this paper is to investigate squeezing and rotating motions between two rough parallel circular discs lubricated by ferro-fluid couple stress lubricant.
Energy dissipation in single ball impact on a fluid-layered specimen with the rubber and steel bed
Mehdi Akhondizadeh, Meysam MahdavinasabImpact of mechanical elements may have the devastating effects including the material breakdown, abnormal deformation, stiffness lowering and the surface wear. In the present…
Prediction and assessment of working conditions of TiAl matrix composite containing MoO3 tabular crystals based on Newton interpolation
Guanchen Lu, Xiaoliang Shi, Ao Zhang, Yuchun Huang, Xiyao LiuThis paper aims to predict and evaluate the wear rate of TiAl-2 Wt.% MoO3 tabular crystals (TMCs) using the Newton interpolation methods.
Enhancing the wear resistance of WC–Co cutting inserts using synthetic diamond coatings
Kaleem Ahmad Najar, N.A. Sheikh, Mohammad Mursaleen Butt, M.A. ShahThe purpose of this study is to investigate the mechanical and tribological properties of the synthetic diamond coatings deposited on WC-Co cutting tools for their prospective…
Surfaces with size different pores: hydrodynamic lubrication quality
Leonid BursteinThis paper aims to assess the behavior of hydrodynamic lubrication between surfaces with pores of different sizes. The profiles of the opposite surfaces are treated by lines with…
Oil film shape prediction of hydrostatic thrust bearing under the condition of high speed and heavy load
Xiaodong Yu, Xu Zuo, Chao Liu, Xuhang Zheng, Hang Qu, Tengfei YuanHydrostatic thrust bearing is a key component of the vertical CNC machining equipment, and often results in friction failure under the working condition of high speed and heavy…
Design and performance analysis on heat pipe hydrostatic thrust bearings based on rectangular oil pad
Xibing Li, Weixiang Li, Xueyong Chen, Ming Li, Huayun Chen, Xin YueThe purpose of this paper is to examine the effect of application of a heat pipe in an aspect of hydrostatic thrust bearings on thermal balance and deformation and the role of…
Study of the effect of overbased calcium or magnesium sulfonate combinated with thiazole derivatives in rapeseed oil on tribological properties
Juan Tan, Yanfei Wang, Mouwu Liu, Jing LiuThe purpose of this paper is to study the tribological properties of a thiazole derivatives (T561), overbased alkyl benzene calcium sulfonate (T106A) compounded with T561 and…
Parametric analysis of the drag torque model of wet multi-plate friction clutch with groove consideration
Peng-hui Wu, Xiaojun Zhou, Chenlong Yang, Haoliang Lv, Tianhao Lin, Xuelei WuThe purpose of this paper is to reduce the drag loss and study the effects of operating conditions and groove parameters such as flow rate and temperature of automatic…
Thermal elastohydrodynamic lubrication analysis of deep groove ball bearing
Xuefang Cui, Fanming Meng, Delong Kong, Zhitao ChengThe purpose of this study is to investigate the thermal elastohydrodynamic lubrication (TEHL) analysis of a deep groove ball bearing.
Online infrared spectra detection of lubricating oil during friction process at high temperature
Yongliang Jin, Haitao Duan, Lei Wei, Song Chen, Xuzheng Qian, Dan Jia, Jian LiThis paper aims to investigate the tribological behavior and online infrared spectra of three types of lubricating oils containing dinonyl diphenylamine (DNDA) antioxidant, which…
Investigation of wear mechanism of forged steel piston skirt under boundary lubricated conditions
Zhang Jian, Deng Lijun, Hao Guannan, Liu ShiyingWith the implementation of new emission standards, the thermal–mechanical coupling load of engine pistons becomes more important. In this case, forged steel material with higher…
In-situ capacitive sensor for monitoring debris of lubricant oil
Yishou Wang, Zhibin Han, Tian Gao, Xinlin QingThe purpose of this study is to develop a cylindrical capacitive sensor that has the advantages of high resolution, small size and designability and can be easily installed on…
A stable cellular automaton model for composite materials with defects
Jun Wu, Zhangcan HuangAs the internal defects (pore defect) of materials formed during the preparation of the composite material have important effects on wear process, the model has been improved to…
Experimental comparison between the Stribeck curves of water lubricated rubber bearing with straight and spiral grooves
Guangwu Zhou, Xiongwei Mi, Jiaxu Wang, Rukang HuThe research purpose of this paper is to obtain a transition process of lubrication condition of water-lubricated rubber bearing (WLRB) by investigating Stribeck curve of WLRB…
Tribocorrosion and the surface repassivation behavior of Monel 400 alloy in artificial seawater
Fuliang Ma, Zhixiang Zeng, Yimin GaoThis paper aims to study the tribocorrosion and the surface repassivation behaviors of Monel 400 alloy in artificial seawater.
Surface texture processing for tribological performance improvement of UHMWPE-based water-lubricated bearings
Zumin Wu, Chenxing Sheng, Zhiwei Guo, Yifei Li, Reza Malekian, Zhixiong LiWater-lubricated bearings can significantly reduce the pollution to environment because the traditional oil lubricant is replaced by water in the bearings. The ultrahigh molecular…
Effect of surface texture on the friction of WC-TiC/Co cemented carbide under a water-miscible cutting fluid environment
Minghua Pang, Xiaojun Liu, Kun LiuThis study aims to clarify the influence mechanism of surface texture (arrays of circular/square and concave/convex) on the frictional properties of WC-TiC/Co cemented carbide…
ISSN:
0036-8792e-ISSN:
1758-5775ISSN-L:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz