Industrial Lubrication and Tribology: Volume 70 Issue 8
Covers all automotive and industrial applications of lubricants
Table of contents
Tribological characteristics of SCM 440 bearing steel under gas and oil lubricant in the cylinder block tractor engine
Okka Adiyanto, Pandu Sandi Pratama, Wonsik ChoiThis paper aims to examine the friction coefficient and wear rate characteristics of SCM 440 bearing steel used in the cylinder block of a tractor engine with gas lubrication and…
Effect of two-phase flow on transmission torque of oil film at high rotational speeds
Fangwei Xie, Xudong Zheng, Yaowen Tong, Bing Zhang, Xinjian Guo, Dengshuai Wang, Yun WangThe purpose of this paper is to study the working characteristics of hydro-viscous clutch at high rotational speeds and obtain the trend of flow field variation of oil film.
The flank wear prediction in micro-milling Inconel 718
Xiaohong Lu, FuRui Wang, Zhenyuan Jia, Steven Y. LiangCutting tool wear is known to affect tool life, surface quality, cutting forces and production time. Micro-milling of difficult-to-cut materials like Inconel 718 leads to…
Detection of foreign particles in lubrication oil with a microfluidic chip
Yu WuThe purpose of this paper is to help understand the mathematical model of inductive sensor and to improve the sensitivity of nonferrous metal particle detection.
Performance investigation of micro-pocketed textured pad thrust bearing
Shipra Aggarwal, R.K. PandeyThe purpose of this paper is to conceive a new surface texture incorporating a tiny shape among the micro-pockets (with circular, rectangular, trapezoidal and triangular…
Tribological behaviour of graphene oxide sheets as lubricating additives in bio-oil
Daoyi Wu, Yufu Xu, Lulu Yao, Tao You, Xianguo HuThis paper aims to study the upgradation of the lubricating performance of the renewable base oil , and to study the tribological behavior of graphene oxide (GO) sheets used as…
Design and fabrication of the tilting-pad thrust bearing surface profile
Zhanchao Wang, Fei Guo, Ying Liu, Xiangfeng Liu, Yuming WangThis paper aims to design a new surface profile with simpler processing technology, which makes the bearing load carrying capacity (LCC) close to that of conventional tilting-pad…
Improving wear resistance of aluminum by hydrophobic sol-gel-derived TiO2 film
Hongjin Zhao, Lei Cao, Yong Wan, Shuyan Yang, Jianguo Gao, Jibin PuThe purpose of this paper is to increase wear resistance of aluminum.
The influence of crystallographic orientation on wear characteristics during single abrasive diamond grit scratching on sapphire
Haiyong Wu, Hui Huang, Xipeng XuThe wear of an abrasive single-crystal diamond (SCD) grit affects the machining quality of the sapphire wafer. This paper aims to investigate the influence of crystallographic…
Preparation and tribological properties of MoS2/graphite composite coatings modified by La2O3
Ming Qiu, Rui Zhang, Yingchun Li, Hui Du, Xiao Xu PangThe MoS2/graphite composite coatings modified by La2O3 through spraying technique were successfully prepared on the inner rings of spherical plain bearings. As a comparison…
Tribological behaviors of precipitates reinforced Cr-Ni-Mo-V steel lubricated by water or water-silica mixture
Shuaishuai Zhu, Baosen Zhang, Zhixin Ba, Xiangyang Mao, Weijie Fei, Zhangzhong WangThis paper aims to investigate the friction and wear properties of Cr-Ni-Mo-V steel against 440C stainless steel under both water and water–silica mixture lubricant.
Lubrication regime analysis for spherical pump
Dong Guan, Harry H. Hilton, Zhengwei Yang, Li Jing, Kuan LuThis paper aims to investigate the lubrication regime in spherical pump, especially under different structural parameters and operational conditions.
Frictional characteristic of sintered iron in high temperature
Yanzhong Wang, Chao GuoThis paper aims to study the change rule of sintered iron friction properties under high temperature and establish the model to predict the friction coefficient.
Performance characteristics of rectangular aerostatic thrust bearing by conformal mapping
Shang-Han Gao, Sheng-Long NongThis paper aims to analyze the pressure distribution of rectangular aerostatic thrust bearing with a single air supply inlet using the complex potential theory and conformal…
Simulation of the characteristics of the water-lubricated journal bearing in twin-screw air compressor
Chuang Wang, Ziwen Xing, Xi Pan, Zhilong HeThe well-operating condition of journal bearing is the assurance to keep superior performance of water-lubricated twin-screw compressor. To design the journal bearing more…
Tribological properties of zirconium phosphate-quinoline compound as an additive in lithium grease
Wenxing Niu, Lei Liu, Hong Xu, Jinxiang DongThe purpose of this paper is to study the tribological properties of (C9H8N)4(H2O)4[Zr8P12O40(OH)8F8] (designated as ZrPOF-Q1) used as an additive in lithium grease.
Oil film thickness analysis of the sealing surface for hydraulic rotary rectangular vane actuator
Han Qing, LiangXi Xie, Lu Li, Chuang JiaThis paper aims to establish a numerical model to calculate contact pressure for rectangular vane sealing surface of hydraulic rotary actuator. Numerical model can be applied to…
Measurement and calculation of oil film thickness in a ball bearing
Baogang Wen, Hongjun Ren, Pengfei Dang, Xu Hao, Qingkai HanThe oil film thickness provides a key performance indicator of a ball bearing lubrication condition. This paper aims to propose an approach to calculate and measure the oil film…
Analysis of velocity slipping at wall boundary under rarefied gas condition based on the effect of viscosity
Shaohua Yang, Wei Long, Fangwei NingVelocity slipping model, based on the stratification theory (the film in inflatable support area of aerostatic guide way was divided into near wall layer, thin layer and…
Tribological properties of biomedical 316L stainless steel after plasma nitriding and Ti-C:H sputtering coating
Wen-Hsien Kao, Yean-Liang SuThis paper aims to investigate the effects of plasma nitriding and Ti-C:H coating deposition on AISI 316L and to find the best tribological performance of various specimens.
The friction effects for contact force analysis of three-axes CNC machine tool
Yunn-Lin Hwang, Thi-Na TaThe purpose of this paper is to study the influence of friction on static and dynamic characteristics, as well as the strength and lifetime of a flexible three-axes computer…
Tribological performance, electrochemical behavior and biocompatibility of high-temperature gas-nitrided Ti6Al4V alloy
Wen-Hsien Kao, Yean-Liang Su, Jeng-Haur Horng, Shu-Er YangThis paper aims to investigate the tribology, corrosion resistance and biocompatibility of high-temperature gas-nitrided Ti6Al4V alloy.
The technical development of titanium alloy surface process using electrochemical abrasive jet machining
Feng Che Tsai, Yann Long Lee, Ju Chun YehThis paper aims to develop an electrochemical abrasive jet machining (ECAJM) technology to investigate the surface machining effect of Ti-6Al-4V alloy.
The effect of fiber orientation on wear behavior of glass fiber-epoxy filled with particles
Ragab K. Abdel-Magied, Mohamed F. Aly, Heba I. ElkhoulyThe fiber orientation is considered one of the important parameters that have an effect on the characteristics of composites. This paper aims to investigate the effect of fiber…
The analysis of the self-lubricating behavior and local failure mechanism of silver-rich solid film
Xiaoxue Li, Kang Yang, Hongru Ma, Haibo Lin, Yukun Han, Qiang HeThe main aim of this paper was to study the self-lubricating behavior and failure mechanism of silver-rich solid film for in-depth analyzing of the friction and wear property of…
ISSN:
0036-8792e-ISSN:
1758-5775ISSN-L:
0036-8792Online date, start – end:
1948Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Prof Carsten Gachot
- Andreas Rosenkranz