Case studies

This case is written to help students understand the concept of segmentation, targeting and positioning in the context of the biscuit industry. The primary learning objectives can be identified as follows: understand the different categorisation in the biscuit market; analyse the basis of consumer segmentation in the biscuit market; analyse the marketing mix strategy of a firm; and highlight the importance of positioning.

Rao, the Director (Marketing) of Mayora India Private Limited, was in dilemma as to how to position Coffee Joy biscuits in the Indian market. The Indian market was intensely competitive with major players like Britannia, Parle and ITC capturing a major share of the market. Should he consider the only the south Indian market based on geography?” Or “Should he target the modern aspirational youth of the country who frequent “Starbucks”?

This case is appropriate for the use in postgraduate course on Marketing particularly on “Segmenting-Targeting-Positioning” (STP) module. The science of STP lies in the collection and analysis of market knowledge and research to understand consumer’s mind, whereas its art lies in generating various implementable alternatives so that the brand can find a place in the hearts and minds of consumers.

Teaching notes are available for educators only.

CSS8: Marketing.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

After completion of the case study, students will be able to discuss the characteristics of sustainable enterprises driving the innovation; analyze the concept of waste to wealth, along with its associated benefits and challenges; provide an example of a sustainable start-up that operates conventionally and is attempting to increase production capacity through automation; and describe the strategies for scaling up the business.

Mr Manigandan Kumarappan’s goal was to provide the world with alternatives to plastic and other nonbiodegradable articles used in homes, offices, hotels and other places which compelled him to leave his corporate life behind and become an entrepreneur. His knowledge, expertise and creativity made him work toward providing a sustainable solution to the plastic-free world which made him create leafy straws for the world. His start-up Evalogia made 10,000 straws a day, mostly with manual production and machine-assisted in part of the processes. Evalogia got orders from all over the world after the ban on plastic from many countries. However, Evalogia was unable to meet the demand, as the manufacturing process mostly depended on manual production at present. Hence, the company planned to scale up its production capacity from 10,000 straws per day to 100,000 straws to meet the demand through automation or by increasing the production units to meet the growing demand from domestic and international markets. Kumarappan wondered if increasing the number of manufacturing facilities would make it harder to hire new staff, manage existing ones, train them and provide overall supervision; if these tasks were not completed well, the product’s quality and, subsequently, its demand, might suffer. The automation process required huge investment, time and a great deal of skepticism for its success. Kumarappan was stuck over whether to add more production units or automate the process to increase production.

This case study is suitable for graduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, students will be able to recall the fundamental concepts of group arrival and the check-in process within the hotel industry; explain the various operational procedures used to enhance a smooth group check-in in hotels; use the steps defined in group check-in procedure to improve service efficiency in hotel operations; and examine and evaluate the optimal solution for a smooth group check-in for hotels.

“The Big Fat Indian Wedding” delves into the challenges faced by Hotel Plaza Blu, a business hotel in Pune, Maharashtra, in 2023. A big wedding group was arriving at the hotel, which comprised almost 350 adults and 120 children. Mr Parag Patil, the front office manager, had done all the preparations for group arrival but just one hour before the arrival Mr Suresh Menon, the group coordinator, came and informed that 150 additional guests would be arriving, as the other hotel, where arrangements for these guests were made, had a major electricity generator breakdown and the hotel was in complete blackout. Patil had the challenge of formulating an action plan to achieve a smooth group check-in with the last-minute changes.

Executive development programmes and graduate-level courses in non-profit hospitality and tourism management might benefit from this case study. The operational management courses in the BBA, UG management programmes might all benefit from using this case study.

Teaching notes are available for educators only.

CSS 9: Operations and Logistics.

This case was developed from a primary source and is based on interviews and personal evaluations.

Maria was at a scheduled lunch with her direct manager, John, who inquired about the privacy leak regarding employee data she had found a few months earlier. Upon discovering the issue, Maria took on the task of ensuring the privacy leak was dealt with and resolved. John knew it was a challenging interdepartmental task because other managers did not immediately recognize the seriousness and full impact of the issue on employee privacy. Plus, the belief was that the project to combine two software programs improving CRM functionality, causing the employee data leak, needed immediate release. During the lunch, Maria stated that the privacy problem was fully eliminated and that, in the end, it did impact a lot more than only a few employees. John actively encouraged Maria in the conversation to seek feedback from Richard, the managing director directly involved and responsible for the project, which Maria had already done. When the feedback arrived, Maria felt extremely hurt by the comments and began to question the validity of the company’s values. Now, she must decide what her options are.

This case study is about dealing with feedback, career development and how to receive and provide feedback. It presents a situation that allows for a variety of ways to address negative feedback and shows that different reactions can have broader consequences for career development. At the same time, the case illustrates how feedback is given in international teams and companies, and how intercultural or gender-relevant circumstances may have to be considered.

This case study was written for use in BA and MA classes to promote discussion regarding feedback. Relevant courses in business and administration or an international business study program could be organizational behavior, communication training, conflict management, an intercultural competencies course or in line with career management sequences.

Early program BA students, BA students in advanced semesters as well as MA students with work experience are all markets for the case. It has been class-tested with BA international business students. While advanced BA and graduate students are able to and expected to enrich discussions by contributing personal stories, early program BA students benefit from learning how to create feedback and how to read feedback – including from other students, instructors and managers, to use during their first internships.

The case and supporting teaching note were developed through the use of secondary sources such as company documents and archives, news articles and academic publications.

Jane Fraser, Citigroup CEO and the first woman to lead a major Wall Street bank, found herself at a crossroads. Weeks prior to the company’s 2022 annual shareholder meeting, Citigroup announced it would provide reproductive health-care benefits to employees traveling out of state for an abortion. Prompted by legal developments that hinted at the potential for a widespread ban on abortions, the announcement resulted in threats from Republican lawmakers to change course or suffer financial consequences. Through the case, students explore the role of business and corporate leadership in response to controversial political issues, including the potential opportunities and threats.

The case is best-suited for management or other business students at the undergraduate or graduate/MBA level. The learning objectives of the case would fit well within any of the following courses: Corporate Social Responsibility (CSR)/Business and Society; Business Ethics and Decision-Making; and Strategic Management. Instructors should position the case after students have been introduced to the topic of corporate social responsibility, ethical decision-making and/or CEO activism.

The case is based on the data collected from various secondary sources only.

Godi India, a lithium-ion cell manufacturing company in India, was working to design e-cell for electric vehicles (EV) which would be compatible with Indian conditions and reduce the cost of battery to the extent possible because e-cell contributes half of the electric vehicle’s price. Godi India was set up in January 2020 by Mahesh Godi. Looking for opportunities in India after having worked in the USA for 17 years, Mahesh found that even with the rise in EV the lithium-ion cell manufacturing in India was almost zero. Using innovation as its main strategy, the start-up started its operation with a team of 30 scientists. The start-up already registered 25 patents under its name with few awaiting. Most of the EV companies relied on Chinese lithium-ion cell. Local lithium-ion cell manufacturing was believed to be the key for EV industry growth in a country. Central government production linked schemes worth INR 18,100 crore were signed by major players like Ola electric, Reliance new energy and Rajesh exports to develop locally manufactured advance cells. The push from the government for locally manufacturing the cells was a major trigger for the rise in the EV industry. The case provides the analysis of the strategies applied by the company to grow in the lithium-ion cell manufacturing industry.

This case can be used in strategic management, entrepreneurship and general management courses/modules at the Undergraduate and Postgraduate level.

This case study was developed using data from secondary sources. The data was collected from the organization’s website, annual reports, press releases, published reports and documents available on the internet.

According to the International Energy Agency’s (IEA) World Energy Outlook (WEO), 775 million people worldwide would not have access to electricity even by 2022, with the majority of them living in sub-Saharan Africa (SSA) (Cozzi et al., 2022). In SSA, energy poverty had been a serious issue over the years. According to the IEA, 600 million people lacked access to electricity in 2019, while 900 million people cooked with traditional fuels (Cozzi et al., 2022). A World Bank report from 2018 said many SSA countries had energy access levels of less than 25% (Cozzi et al., 2022). Energy poverty in SSA hampered sustainable development and economic growth.

Despite significant efforts to address this poverty, Africa remained the continent with the lowest energy density in the world. Although solar and other energy-saving products were appealing, their adoption rates were modest, and their distribution strategies were not particularly effective. The lack of electricity exacerbated a number of socioeconomic problems, as it increased the demand for and use of wood fuel, which caused serious health problems and environmental harm.

While working in Uganda, Katherine Lucey (Lucey) saw that having no electricity had negatively affected women’s health in particular because it was women who were responsible for taking care of the home. These effects were both direct and indirect. The women’s reliance on potentially harmful fuels for cooking, such as firewood and charcoal, resulted in their suffering from respiratory and eye problems, in addition to other health issues. Furthermore, the distribution of energy-saving and renewable energy items was seen as the domain of men, and there was an inherent gender bias in energy decisions. Women were not encouraged to participate in energy decisions, despite the fact that they were the ones managing the home and would gain from doing so. In addition, because there was no light after dusk, people worked less efficiently. Lucey saw the economic and social difficulties that electricity poverty caused for women in rural Africa. She also witnessed how the lives of a few families and organizations changed after they started using solar products. This motivated her to start Solar Sister with the mission of achieving a sustainable, scalable impact model for expanding access to clean energy and creating economic opportunities for women.

Solar Sister collaborated with local women and women-centric organizations to leverage the existing network. Women were trained, provided all the necessary support and encouraged to become Solar Sister Entrepreneurs and sell solar products in their communities and earn a commission on each sale. To provide clean energy at their customers’ doorstep, the Solar Sister Entrepreneurs received a “business in a bag” – a start-up kit containing inventory, training and marketing assistance.

Solar Sister’s business model empowered the women in SSA by providing them with an entrepreneurship opportunity and financial independence. Also, the use of solar products helped them shift from using hazardous conventional cooking fuels and lead a healthy life. The children in their households were able to study after sunset, and people in the community became more productive with access to clean energy.

The COVID-19 pandemic outbreak, however, had a serious impact on Solar Sister. It found it challenging to mentor and encourage new business owners due to restrictions on travel and on group gatherings. The Solar Sisters were unable to do business outside the house either. Their source of income, which they relied on to support their families, was therefore impacted. The COVID-19 outbreak also slowed down the progress achieved by the community over the years and made household energy purchasing power worse. Furthermore, the organization was also grappling with other issues like limited access to capital, lack of awareness and infrastructural challenges. Another challenge lay in monitoring and evaluating the organization’s impact on the last mile.

In the absence of standardized measurement tools and issues in determining the social impact of Solar Sister, it would be interesting to see what approach Lucey will take to measure the impact of Solar Sister on the society. What measurement tool/s will Lucey implement to gauge the social impact of Solar Sister?

This case is intended for use in PG/Executive-level programs as part of a course on Social Entrepreneurship and Sustainability.

This case study was developed using publicly available published sources like the company’s website, articles, blogs, videos, filings, etc. Multiple sources were used to put together the chronology, quotes and details. This case is not disguised. All the key figures in the case study are identified by their real names.

Black Girls Code (BGC) was founded by Kimberly Bryant (Bryant, she) as a nonprofit organization in 2011. BGC conducted workshops and programs to teach young girls of color technology, science, engineering and math and train them in Web design, developing apps and robotics. It aimed to address the lack of diversity in science and technology. The organization has received support from tech giants like Google, Facebook and IBM. In one decade, the organization trained more than 30,000 girls and aimed to teach one million girls by 2040.

In 2021, the BGC board ousted Bryant, citing allegations of workplace impropriety. She was put on paid administrative leave by the board. This ousting was done in the aftermath of complaints by several employees who raised concerns about Bryant’s conduct. The former and current employees said that high turnover in the organization was due to Bryant’s leadership, which was rooted in fear, and that she would publicly insult managers. The board formed a special committee to evaluate the concerns and sent Bryant on administrative leave.

Cristina Jones, who succeeded Bryant as CEO, brought about several changes in the organization and expanded the scope of science, technology, engineering and math to include arts. She expanded the courses to include design, gaming and others. She was looking forward to launching one million black girls in tech by 2040. But before she could go on, she needed to ensure that the ouster of the founder did not hinder the activities at BGC in any manner and also needed to address the concerns of employees, students and funders.

This case can be used to learn about nonprofits, the role of nonprofits in building an equitable society and nonprofit entrepreneurs. The objective is to understand how passionate entrepreneurs can create organizations that can make a high impact with limited resources but with ambition and vision for radical change.

This case also helps in learning the challenges encountered due to the rapid growth of startups and the role of the leader in handling such growth.

This case can be integrated into any of the existing courses or taken as a special case study to illustrate the gender and racial disparities that exist even in highly developed countries like the USA.

This case was written using primary data through various channels, including in-depth structured interviews with the CEO and other individuals at the Crisis Center of Tampa Bay (CCTB), as well as exchanging email messages and phone conversations with employees at CCTB. All interviews were recorded and transcribed. In addition, one of the authors took a tour of the main offices of CCTB and took notes on the physical facilities as well as the information provided by the tour guide. Public information from CCTB was used to enhance the information and provide background. All accounts presented in this case are real, and no information was altered or fabricated.

Clara Reynolds had been CEO of CCTB for over eight years. The agency had almost tripled its budget in the time she had been there. Her leadership style had positively impacted the culture of the organization. Employees valued her open and transparent leadership style. Employees saw her commitment to training employees, creating work–life balance and helping employees be exceptional at their jobs. There was an issue, however, with Transcare, the organization’s ambulatory service. The performance of the business was declining, and Clara wanted to update the board within 60 days at the next quarterly board meeting. She was not sure what she could do to increase engagement with Transcare’s staff, which would show the board that the staff was fully willing to do what was necessary.

This case is appropriate for teaching undergraduate or graduate-level courses in leadership, organizational behavior or principles of management. It is designed to be discussed during one class period. It will save time and improve the flow if the students read the case before class and are prepared when they arrive. Any information needed for the case discussion has been presented in the case; no further research by the students is necessary. Students should think about the role of leadership in a nonprofit. They should put themselves in the protagonist’s shoes throughout the reading of the case.