Search results

This paper aims to solve the problems molybdenum disulfide (MoS₂) nanosheets suffer from inadequate dispersion stability and form a weak lubricating film on the friction surface, which severely limits their application as lubricant additives.

MoS₂/C₆₀ nanocomposites were prepared by synthesizing molybdenum disulfide (MoS₂) nanosheets on the surface of hydrochloric acid-activated fullerenes (C₆₀) by in situ hydrothermal method. The composition, structure and morphology of MoS₂/C₆₀ nanocomposites were characterized. Through the high-frequency reciprocating tribology test, its potential as a lubricant additive was evaluated.

MoS₂/C₆₀ nanocomposites that were prepared showed good dispersion in dioctyl sebacate (DOS). When 0.5 Wt.% MoS₂/C₆₀ was added, the friction reduction performance and wear resistance improved by 54.5% and 62.7%, respectively.

MoS₂/C₆₀ composite nanoparticles were prepared by in-situ formation of MoS₂ nanosheets on the surface of C₆₀ activated by HCl through hydrothermal method and were used as potential lubricating oil additives.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2023-0321/

This paper aims to explore the preparation and tribological performance of MoS₂ nanoparticles supported on fly ash (FA) microparticles.

FA was activated by NaOH, oleic acid and HCl to obtain three modified FA samples. Nano-MoS₂ was deposited on them to form MoS₂/FA additives for poly-α-olefin (PAO) modification. Tribological tests were conducted on a reciprocating rig through the ball-on-disk friction manner. Using X-ray diffraction, scanning electron microscope, energy dispersive spectrometer, Raman spectrometer and element analyzers, the products and their lubrication mechanisms were characterized.

At 1.5 Wt.%, nano-MoS₂ and MoS2/FA could remarkably improve the tribological properties of PAO. The nano-MoS₂ deposited on the HCl-activated FA presented better lubrication performance than nano-MoS₂. It could reduce friction and wear by approximately 27% and approximately 66%, respectively. The lubrication of MoS₂/FA can be attributed to the formation of MoS₂ and carbon containing lubricating film.

FA was applied as a supporter to prepare MoS₂/FA lubricants. The reuse of FA, a solid waste, is important for environmental protection. Moreover, MoS₂/FA is more economical than nano-MoS₂ as a lubricant, because it contains approximately 71% of low-cost FA.

This paper aims to use an ionic liquid (IL, [HMIM]PF₆) to improve the lubrication performance of liquid metal (LM) as a lithium grease additive and to expand the application range of LM.

In this paper, the different mass ratios of [HMIM]PF₆/LM mixtures were added into the lithium grease on a four-ball tribo-meter to investigate the effects of its tribological behavior. Scanning electron mircoscope/energy dispersive spectroscopy and X-ray photoelectron spectroscopy were used to reveal the anti-wear and friction-reducing mechanism of the additives.

When the load was used at 461 N, the average coefficient of friction (ACOF) and average wear scar diameter (AWSD) of steel ball Lubricated with grease with an optimal ratio of 2:3 ([HMIM]PF₆/LM) were reduced by 32.8% and 30.5%, respectively. Friction and wear mechanisms are ascribed to friction-induced additive components that can simultaneously form a composite lubrication film consisting of FePO₄, FeF₃, Ga₂O₃, In₂O₃ and SnO₂.

Compared with the pure lithium-based grease, when [HMIM]PF₆/LM was added with an optimal ratio of 2:3, the ACOF and AWSD were reduced by 12.4% from 0.097 to 0.085 and 23.8% from 552.117 µm to 420.590 µm under 392 N, respectively. When at 461 N, the ACOF and AWSD of steel ball were reduced by 32.8% from 0.122 to 0.082 and 30.5% from 715.714 µm to 497.472 µm, respectively. It was shown that the simultaneous addition of LM and [HMIM]PF₆ can form a composite lubrication film consisting of FePO₄, FeF₃, Ga₂O₃, In₂O₃ and SnO₂.

In this paper, [HMIM]P F₆ is added with LM simultaneously to improve the lubrication properties of lithium grease, and expand the application scope of LM.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0017/

This paper aims to successfully synthesize three-dimensional spindle-like Au functionalized Co₃O₄-ZnO nanocomposites; characterize the structure, morphology and surface chemical properties of the products; study the effect of Au NPs doping concentration, operating temperature different gas to, sensing properties; and introduce an attractive gas sensor for acetone detection.

Au NPs functionalized Co₃O₄-ZnO nanocomposite was prepared by coprecipitation and impregnation methods; the structure and surface chemical property of the products were characterized by XRD, SEM, TEM, UV-Vis, BET and XPS. The sensing ability of Au@Co₃O₄-ZnO for acetone and mechanism was analyzed systematically.

The results of gas sensing tests show that the unique component structure, Schottky junction and catalytic effect of Au functionalization make it have low operating temperature, excellent selectivity, high response (10 ppm, 56) and rapid response recovery time.

All the characterization and test data of the prepared materials are provided in this paper and reveals the gas sensing mechanism of the gas sensor.

The detection limit is 2.92–100 ppb acetone. It is promising to be applied in low-power, micro detection and miniature acetone gas sensors.

The gas sensor prepared has a lower working temperature and low detection limit, so it has promising application prospects in low-concentration acetone detection and early warning.

The unique component structure, Schottky junction and catalytic effect of Au functionalization Co₃O₄-ZnO make it have low operating temperature, excellent selectivity and rapid response recovery time.

The most recent and prestigious scientific research shows that nitrogen leaching caused by over-used nitrogen fertilizer rapidly acidifies all soil types in China, revolutionizing the basic understanding of the mechanism of soil acidification. The purpose of this paper is to study the impact of nitrogen on soil acidity over the long run, which is the shadow price of nitrogen.

In a discrete dynamic programming model, this paper compares the nitrogen application and soil pH between optimal nitrogen control that takes the shadow price of nitrogen into consideration and myopic nitrogen control that ignores that shadow price. Using a five-year panel experimental data on a rapeseed-rice rotation, this paper simulates and numerically solves the dynamic model.

Both theoretically and empirically, this paper shows that the over-use of nitrogen and the decline in soil pH are explained by ignorance of the shadow price of nitrogen. Compared with optimal nitrogen control, myopic nitrogen control applies more nitrogen in total, resulting in lower soil pH. In addition, over-use in the first season contributes to soil acidification and the carry-over effects mitigate that problem.

This paper enriches the literature by extending the study of the environmental impact of nitrogen leaching to its impact on the long-term loss in agricultural production, providing a new theoretical framework in which to study soil acidification rather than conventionally treating soil acidification as a secondary consequence of acid rain, and showing the possibility of using nitrogen control to mitigate soil acidification when lime applications are not feasible due to socio-economic constraints.

As the pioneer nation to formally integrate data as a factor of production into its national strategy, does China’s research emphasis on data factor market differ from that of other countries? Currently, there is a notable absence of comprehensive comparative analyses addressing this issue. The purpose of this study is to fill this gap by systematically reviewing the development trajectory of research on the data factor market from a governance perspective.

In this study, the authors used Citespace software to conduct bibliometric analyses on a corpus of 1,304 international publications and 1,249 Chinese publications. These analyses encompassed various dimensions, including publication quantity and trend analysis, cocitation analysis and keyword cooccurrence analysis, while also facilitating a comparative examination of research disparities between Chinese and international literature.

There are significant differences between Chinese and international data factor market studies in terms of governance environment, governance entities, governance technology and governance mechanism. The authors strongly advocate the promotion of cross-border research collaboration to advance the research and application of data factor market governance.

The authors have innovatively proposed a framework for data factor market governance. Building upon this framework, the authors conducted a comprehensive comparative analysis of research disparities between Chinese and international literature, thereby unveiling emerging research trends in the field of data factor market.

The purpose of this paper is to investigate the impact of increasing trade and investment relations between China and Latin American economies. The paper focuses on the threats and opportunities that permeate this relationship.

The paper surveys existing literature and secondary data in Spanish, Portuguese, and in English to investigate the different ramifications of this dynamic relationship between China and Latin American economies.

After analyzing trade and investment trends and data, it is clear that Latin American economies must make changes to increase their participation in the Chinese market. Direct involvement with China is inherently risky, however, the opportunities obviously make the alliance necessary. Latin American economies are under increasing pressure to revamp their business environments and to implement long‐term strategies in order to compete more efficiently with China, domestically and in third‐markets. China has showed Latin American economies that investments in education, R&D, innovation, infrastructure, and friendly business policies, both facilitate and foster the creation of new competitive advantages.

This paper highlights and contributes to a better understanding of the ongoing challenges and opportunities permeating the Chinese Latin America's trade and investment relationship, as well as a indicating a number of areas for further study.

The purpose of this paper is to study the resonance failure sensitivity analysis of straight-tapered assembled pipe conveying nonuniform axial fluid by an active learning Kriging (ALK) method.

In this study, first, the motion equation of straight-tapered assembled pipe conveying nonuniform fluid is built. Second, the Galerkin method is used for calculating the natural frequency of assembled pipe conveying nonuniform fluid. Third, the ALK method based on expected risk function (ERF) is used to calculate the resonance failure probability and moment independent global sensitivity analysis.

The findings of this paper highlight that the eigenfrequency and critical velocity of uniform fluid-conveying pipe are less than the reality and the error is biggest in first-order natural frequency. The importance ranking of input variables affecting the resonance failure can be obtained. The importance ranking is different for a different velocity and mode number. By reducing the uncertainty of variables with a high index, the resonance failure probability can be reduced maximally.

There are no experiments on the eigenfrequency and critical velocity. There is no experiments about natural frequency and critical velocity of straight tapered assembled pipe to verify the theory in this paper.

The originality of this paper lies as follows: the motion equation of straight-tapered pipe conveying nonuniform fluid is first obtained. The eigenfrequency of nonuniform fluid and uniform fluid inside the assembled pipe are compared. The resonance reliability analysis of straight-tapered assembled pipe is first proposed. From the results, it is observed that the resonance failure probability can be reduced efficiently.

Experimental mid/large scale testing of ship-like stiffened panels in compression is a quite expensive exercise that is not standard. Numerical simulations are preferred instead. Because of being relatively inexpensive (cost and time wise), most authors perform an exhaustive design space exploration arriving at a significant number of runs. This work demonstrates that the buckling response with respect to the nondimensional slenderness ratios may well be fitted with nine runs per stiffener geometry.

Efficient derivation of buckling strength formulas for stiffened panels through the employment of design of experiments (DoE) and response surface methodology (RSM) combined with numerical nonlinear experimentation over the entire range of practical geometries.

The surrogate model developed for T-bar stiffeners predicts accurately enough the ultimate stress in the practical design area, while the surrogate models for angle bars and flat bars demonstrate difference between 10 and 30% from common structural rules (CSR).

To the authors' best knowledge, the statistical-based formal and rigorous approach of DoE and RSM to obtaining buckling surfaces for stiffened panels is performed for the first time. The number of required observations per stiffener type has not been addressed yet as each work selects its own sampling scheme without formal reasoning. This work comes to frame the number of observations for efficient surrogate model building.