Influence of ionic liquid/liquid metals on the lubrication properties of lithium grease
Industrial Lubrication and Tribology
ISSN: 0036-8792
Article publication date: 3 June 2024
Issue publication date: 26 June 2024
Abstract
Purpose
This paper aims to use an ionic liquid (IL, [HMIM]PF6) to improve the lubrication performance of liquid metal (LM) as a lithium grease additive and to expand the application range of LM.
Design/methodology/approach
In this paper, the different mass ratios of [HMIM]PF6/LM mixtures were added into the lithium grease on a four-ball tribo-meter to investigate the effects of its tribological behavior. Scanning electron mircoscope/energy dispersive spectroscopy and X-ray photoelectron spectroscopy were used to reveal the anti-wear and friction-reducing mechanism of the additives.
Findings
When the load was used at 461 N, the average coefficient of friction (ACOF) and average wear scar diameter (AWSD) of steel ball Lubricated with grease with an optimal ratio of 2:3 ([HMIM]PF6/LM) were reduced by 32.8% and 30.5%, respectively. Friction and wear mechanisms are ascribed to friction-induced additive components that can simultaneously form a composite lubrication film consisting of FePO4, FeF3, Ga2O3, In2O3 and SnO2.
Research limitations/implications
Compared with the pure lithium-based grease, when [HMIM]PF6/LM was added with an optimal ratio of 2:3, the ACOF and AWSD were reduced by 12.4% from 0.097 to 0.085 and 23.8% from 552.117 µm to 420.590 µm under 392 N, respectively. When at 461 N, the ACOF and AWSD of steel ball were reduced by 32.8% from 0.122 to 0.082 and 30.5% from 715.714 µm to 497.472 µm, respectively. It was shown that the simultaneous addition of LM and [HMIM]PF6 can form a composite lubrication film consisting of FePO4, FeF3, Ga2O3, In2O3 and SnO2.
Originality/value
In this paper, [HMIM]P F6 is added with LM simultaneously to improve the lubrication properties of lithium grease, and expand the application scope of LM.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0017/
Keywords
Acknowledgements
The authors wish to express their thanks to Mrs Ziyan Lu for their assistance in using the SEM/EDS, HRT EM images and 3D friction testing machine diagram. The financial support received from Anhui Province Natural Science Foundation of China (2008085ME167), Anhui University Outstanding Young Talents Programs (gxyqZD2020051) are gratefully acknowledged. The Talent Research Fund of Hefei University (21-22RC33) and the Open Project of Anhui Province Key Laboratory of Critical Friction Pair for Advanced Equipments (LCFP-2404) and Excellent Scientific Research and Innovation Team of Anhui University (2022AH010096) are also gratefully acknowledged.
Citation
Wen, M., Hu, E.Z., Fei, X. and Hu, K. (2024), "Influence of ionic liquid/liquid metals on the lubrication properties of lithium grease", Industrial Lubrication and Tribology, Vol. 76 No. 5, pp. 608-619. https://doi.org/10.1108/ILT-01-2024-0017
Publisher
:Emerald Publishing Limited
Copyright © 2024, Emerald Publishing Limited