Search results

Domain integrals, known as volume potentials in 3D elasticity problems, exist in many boundary-type methods, such as the boundary element method (BEM) for inhomogeneous partial differential equations. The purpose of this paper is to develop an accurate and reliable technique to effectively evaluate the volume potentials in 3D elasticity problems.

An adaptive background cell-based domain integration method is proposed for treatment of volume potentials in 3D elasticity problems. The background cells are constructed from the information of the boundary elements based on an oct-tree structure, and the domain integrals are evaluated over the cells rather than volume elements. The cells that contain the boundary elements can be subdivided into smaller sub-cells adaptively according to the sizes and levels of the boundary elements. The fast multipole method (FMM) is further applied in the proposed method to reduce the time complexity of large-scale computation.

The method is a boundary-only discretization method, and it can be applied in the BEM easily. Much computational time is saved by coupling with the FMM. Numerical examples demonstrate the accuracy and efficiency of the proposed method..

Boundary elements are used to create adaptive background cells, and domain integrals are evaluated over the cells rather than volume elements. Large-scale computation is made possible by coupling with the FMM.

The incorporation of phosphide additives is regarded as a highly effective strategy for enhancing the lubricative qualities of base oils. This study aims to assess the lubrication behavior and efficacy of various phosphide additives in polyethylsiloxane (PES) through the employment of the Schwingum Reibung Verschleiss test methodology, across a temperature range from ambient to 300°C.

PES demonstrated commendable lubrication capabilities within the Si3N4/M50 system, primarily attributable to the Si-O frictional reaction film at the interface. This film undergoes disintegration as the temperature escalates, leading to heightened wear. Moreover, the phosphide additives were found to ameliorate the issues encountered by PES in the Si3N4/M50 system, characterized by numerous boundary lubrication failure instances. A chemical film comprising P-Fe-O was observed to form at the interface; however, at elevated temperatures, disintegration of some phosphide films precipitated lubrication failures, as evidenced by a precipitous rise in the coefficient of friction.

The results show that a phosphide reactive film can be formed and a reduction in wear rate is achieved, which is reduced by 64.7% from 2.98 (for pure PES at 300°C) to 1.05 × 10^–9 μm³/N m (for triphenyl phosphite at 300°C).

The data derived from this investigation offer critical insights for the selection and deployment of phosphide additives within high-temperature lubrication environments pertinent to PES.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0139/

This paper aims to try to develop new, environmentally friendly and efficient lubricating additives; study the compatibility of carbon-based additives with different base oils [Polyalphaolefin (PAO)-3, PAO-20 and NPE-2]; and explore the lubrication mechanism.

Oleylamine modified carbon nanoparticles (CNPs-OA) were prepared and the dispersion stability of CNPs-OA in PAO-3, PAO-20 and NPE-2 base oils was investigated by transmission electron microscopy, Fourier transform infrared, thermogravimetric analysis, energy dispersive spectroscopy and X-ray photoelectron spectroscopy. Universal Mechanical Tester (UMT) platform was used to carry out experiments on the effects of different additive concentrations on the lubricating properties of base oil.

The mean friction coefficient of PAO-3, PAO-20 and NPE-2 reduced by 32.8%, 10.1% and 11.4% when the adding concentration of CNPs-OA was 1.5, 2.0 and 0.5 Wt.%, respectively. Generally, The CNPs-OA exhibited the best friction-reducing and anti-wear performance in PAO-3.

The agglomeration phenomenon of carbon nanoparticles as lubricating additive was improved by surface modification, and the lubricating effect of carbon nanoparticles in three synthetic aviation lubricating base oils was compared.

Duplex stainless steel is composed of equal amounts of austenite and ferrite, which has excellent corrosion resistance and strength. However, after the metal was welded, the ratio of austenite and ferrite in the joint is unbalanced, and secondary phase precipitates are produced, which is also an important cause of pitting corrosion in the joint.

This paper aims to study the mechanical and corrosion behavior of welded joints, by adjusting the welding parameters of laser hybrid welding, dual heat sources are used to weld 2205 duplex stainless steel. The two-phase content of different parts of the welded joint is measured to study the influence of the ratio of the two-phase on the mechanical and corrosion properties of the joint.

The ratio of austenite and ferrite in different welded joints has an obvious difference, and from top to bottom, the austenite content decreased gradually, and the ferrite content increased gradually. The harmful phases are precipitated in the middle and lower part of the joint. The strength of welded joints is slightly lower than that of base metal. At the same time, the fracture analysis shows that some ferrite phases are affected by the precipitate in the grain and produce quasi-cleavage fracture. The corrosion results show that the corrosion resistance of the welded joints is lower than that of the base metal, and the concentration of chloride ions affects the corrosion resistance.

In this paper, the authors use the influence of different welding processes on the two-phase ratio of the joint to further study the influence of the microstructure on the corrosion resistance and mechanical properties of the weld.

The salinity of the oilfield produced water has a significant effect on steel corrosion. The purpose of this paper is to study the influence of salinity on corrosion behavior of X60 steel and it also provides basic for material selection of gas wells with high salinity.

The weight loss experiment was carried out on steel with high temperature and high pressure autoclave. The surface morphology and composition of corrosion scales were studied by means of scanning electron microscopy, energy dispersive spectroscopy and X-ray diffractometry.

The results show that as salinity increases, the corrosion rate of X60 steel will gradually experience a rapid decline stage and then a slow decline stage. X60 steel is mainly exhibiting uniform corrosion in the first rapid decline stage and pitting corrosion in the second slow decline stage. The increase in salinity reduces gas solubility, which, in turn, changes the morphology and density of the corrosion scales of X60 steel. At low salinity, loose iron oxides generated on the surface of the steel, which poorly protects the substrate. At high salinity, surface of the steel gradually forms protective films. Chloride ions in the saline solution mainly affect the structure of the corrosion scales and initiate pitting corrosion. The increased chloride ions lead to more pitting pits on the surface of steel. The recrystallization of FeCO₃ in pitting pits causes the corrosion scales to bulge.

The investigation determined the critical concentration of pitting corrosion and uniform corrosion of X60 steel, and the new corrosion mechanism model was presented.

Riveting deformation is inevitable because of local relatively large material flows and typical compliant parts assembly, which affect the final product dimensional quality and fatigue durability. However, traditional approaches are concentrated on elastic assembly variation simulation and do not consider the impact of local plastic deformation. This paper aims to present a successive calculation model to study the riveting deformation where local deformation is taken into consideration.

Based on the material constitutive model and friction coefficient obtained by experiments, an accurate three-dimensional finite element model was built primarily using ABAQUS and was verified by experiments. A successive calculation model of predicting riveting deformation was implemented by the Python and Matlab and was solved by the ABAQUS. Finally, three configuration experiments were conducted to evaluate the effectiveness of the model.

The model predicting results, obtained from two simple coupons and a wing panel, showed that it was a good compliant with the experimental results, and the riveting sequences had a significant effect on the distribution and magnitude of deformation.

The proposed model of predicting the deformation from riveting process was available in the early design stages, and some efficient suggestions for controlling deformation could be obtained.

A new predicting model of thin-walled sheet metal parts riveting deformation was presented to help the engineers to predict and control the assembly deformation more exactly.

The existing Nonlinear Dynamic Vibration Absorbers (NLDVAs) have the disadvantages of complex structure, high cost, high installation space requirements and difficulty in miniaturization. And most of the NLDVAs have not been applied to reality. To address the above issues, a novel Triple-magnet Magnetic Dynamic Vibration Absorber (TMDVA) with tunable stiffness, only composed of triple cylindrical permanent magnets and an acrylic tube, is designed, modeled and tested in this paper.

(1) A novel TMDVA is designed. (2) Theoretical and experimental methods. (3) Equivalent dynamics model.

It is found that adjusting the magnet distance can effectively optimize the vibration reduction effect of the TMDVA under different resonance conditions. When the resonance frequency of the cantilever changes, the magnet distance of the TMDVA with a high vibration reduction effect shows an approximately linear relationship with the resonance frequency of the cantilever which is convenient for the design optimization of the TMDVA.

Both the simulation and experimental results prove that the TMDVA can effectively reduce the vibration of the cantilever even if the resonance frequency of the cantilever changes, which shows the strong robustness of the TMDVA. Given all that, the TMDVA has potential application value in the passive vibration reduction of engineering structures.

The purpose of this paper is to reveal the effect of microstructure on the corrosion behavior of CoCrNi alloy in 3.5 Wt.% NaCl solution.

The as-cast CoCrNi alloy was prepared by arc melting, and the cold-rolled and annealed alloys were prepared by processing the as-cast alloy.

The experimental results showed that a protective passivation film was formed on the surfaces of these CoCrNi MEA, and the stability and compactness of alloys increased in the sequence of cold-rolled, as-cast and annealed CoCrNi alloys. The annealed CoCrNi alloys had the best pitting resistance.

This study proposes the effect of the microstructure of CoCrNi alloy on corrosion resistance.

Unsafe behavior is a major cause of safety accidents, while in most management measures for unsafe behavior, the construction workers are generally managed as a whole. Therefore, this study aims to propose group management of construction workers' unsafe behavior considering individual characteristics.

A cognitive process model with ten cognitive factors was constructed based on cognitive safety theory. The questionnaire was developed and validated based on the cognitive model, and the results showed that the questionnaire had good reliability and validity, and the cognitive model fitted well. Latent class analysis was used to classify the unsafe behaviors of construction workers.

Four categories of cognitive excellent type, cognitive failure type, no fear type and knowingly offending type were obtained. Workers of cognitive excellent type have good cognitive ability and a small tendency for unsafe behaviors. Workers of cognitive failure type have poor cognitive ability and the potential for cognitive failure in all four cognitive links. Workers of no fear type have weak cognitive ability, and cognitive failure may occur in discovering information and choosing coping links. Workers of knowingly offending type have certain cognitive abilities, but cognitive failure may occur in choosing coping link.

This study formulates targeted management measures according to the potential characteristics of these four types and provides scientific theoretical support for the personalized management of unsafe behavior.

An appropriate equivalent model is the key to the effective analysis of the system and structure in which permanent magnet takes part. At present, there are several equivalent models for calculating the interacting magnetic force between permanent magnets including magnetizing current, magnetic charge and magnetic dipole–dipole model. How to choose the most appropriate and efficient model still needs further discussion.

This paper chooses cuboid, cylindrical and spherical permanent magnets as calculating objects to investigate the detailed calculation procedures based on three equivalent models, magnetizing current, magnetic charge and magnetic dipole–dipole model. By comparing the accuracies of those models with experiment measurement, the applicability of three equivalent models for describing permanent magnets with different shapes is analyzed.

Similar calculation accuracies of the equivalent magnetizing current model and magnetic charge model are verified by comparison between simulation and experiment results. However, the magnetic dipole–dipole model can only accurately calculate for spherical magnet instead of other nonellipsoid magnets, because dipole model cannot describe the specific characteristics of magnet's shape, only sphere can be treated as the topological form of a dipole, namely a filled dot.

This work provides reference basis for choosing a proper model to calculate magnetic force in the design of electromechanical structures with permanent magnets. The applicability of different equivalent models describing permanent magnets with different shapes is discussed and the equivalence between the models is also analyzed.