Search results

Water-based graphite lubricants have good lubricity in the process of metal forming, especially for hot-rolling seamless pipe. Although the use of water as a working fluid system instead of conventional mineral oil has many advantages for the fuel consumption, post cleaning and a new type of lubricant, the graphite contaminated the machine and workers for its physical properties. From the global environmental protection viewpoint, it is urgent to develop a kind of benign material.

Magnesium hydroxide which has the average particle size of 10 μm was chosen as a base material without further modification and pretreatments. On the HT-1000 high-temperature tribometer, the influence of temperature and lubricant materials on the friction coefficient was studied. The tribological performance at 900^°C provided evidence under high temperature for exploring a new lubricant material.

Tap water-based brucite lubricant will open a new chapter in the industrial lubrication, effectively avoiding many unfavorable factors caused by graphite lubrication, such as conductivity, pollution and energy loss. Meanwhile, it expanded the application of brucite as flame-retardant agent, catalyst, water treatment agent and so on.

It is a new and environmental lubricant to tap water-based brucite lubricant. And specially, the preparation process of lubricant is simple and economical.

The engineering education accreditation (EEA) is a principal quality assurance mechanism. However, at many education institutions, the most labor-intensive work of EEA process is accomplished manually. Without the support of computer and information technology, the EEA process leads to high labor intensity, low work efficiency and poor management level. The purpose of this paper is to build a complex network model and realize an information management system of talent training program for supporting the EEA process.

Based on polychromatic graph (PG), this paper builds a network model of talent training program for engineering specialty. The related information and data are organized and processed in this network model. From the bidirections of top-down and bottom-up, the user requirements are retrieved automatically in logic layer. Together with the specialty of mechanical engineering, the proposed PG-based network modeling method is applied and the corresponding information management system is realized.

The study results show that the PG-based network modeling method takes full advantages of the strong simulation ability of PG to model the complex network system and has some unique merits in formal expression of problem, efficient processing of information and lightweight realization of system. Further, the information management system of talent training program can reduce the tedious human labor and improve the management level of EEA process dramatically.

This paper proposes a PG-based network modeling method, in which the nodes and the edges can be painted by some unified colors to describe the different kinds of activities and the various types of interactions. Theoretically, this modeling method does not distinguish the activities, the interactions and their properties in graphic symbol and the problem size is diminished about a half. Furthermore, this paper provides an effective experience and idea to the education institutions for implementing the engineering education accreditation, increasing the education management efficiency and promoting the talent training quality.

This study aims to explore the government’s subsidy preference and pricing decisions of a manufacturer who produces traditional and green product simultaneously under different government subsidy policies.

The authors establish a model consisting of a government, a set of heterogeneous consumers and a manufacturer. Three government subsidy policies are investigated without government subsidy (NS), government subsidy to consumer (CS) and government subsidy to the manufacturer (MS).

The results show that the government subsidy can increase both the green product’s demand and the manufacturer’s profit. The subsidy level and government’s utility under the CS policy are equal to those under the MS policy. Furthermore, if the government’s subsidy level is exogenous, there exists a Pareto improvement region when social welfare for unit greenness level is high. That is, if the government’s subsidy level under the CS policy is higher than that under the MS policy, both government and manufacturer prefer the CS policy; otherwise, they prefer the MS policy.

This paper considers the market where there is a monopoly green manufacturer and a government that only provides subsidy policy. In fact, competition from traditional manufacturers and carbon taxes are also worth exploring in future research.

This study provides some suggestions for government subsidy and provides guidance for the manufacturer’s pricing decisions under different government subsidy policies.

This paper is the first to compare government subsidy to consumer with a government subsidy to the manufacturer and investigate the pricing decisions of a manufacturer who produces traditional and green product simultaneously by considering an endogenous subsidy level of government.

This study aims to improve the survivability and maneuverability of the fighter,and study the stealth performance of fighter in the jet noise of aeroengine, it is of great significance to study the jet noise characteristics of double S-bend nozzles.

The multiparameter coupling and super-ellipse design methods are used to design the cross section of double S-bend nozzle. Taking unsteady flow information as the equivalent sound source, the noise signal at the far-field monitoring points were calculated with Ffowcs Williams–Hawkings (FW–H) method, and then, the sound source characteristics of the double S-bend nozzle are analyzed.

The results show that the internal flow of the S-bend nozzle with rectangular section is smoothed and the aerodynamic performance is better than super-ellipse section, the shear layer length of rectangular section is longer, the thickness is smaller and the mixing ability is stronger. The sound pressure level of the two S-bend nozzles decreases with the increase of the monitoring angle, and the sound pressure on the horizontal plane is greater than the vertical plane. In the direction of 40°–120°, the jet noise of rectangular nozzle is smaller, and the multiparameter coupled rectangular cross section structure is more applicable.

It is beneficial to reduce the jet noise of the engine tail nozzle and improve the stealth performance of the aircraft.

There is very little research on the jet noise characteristics of the double S-bend nozzle. The multiparameter coupling and the super-ellipse method are used to design the nozzle flow section to study the aerodynamic performance and jet noise characteristics of the double S-bend nozzle and to improve the acoustic stealth characteristics of the aircraft.

Omnichannel sales have provided new impetus for the development of catering merchants. The authors thus focus on how catering merchants should manage capacities at the ordering, production and delivery stages to meet customers’ needs in different channels under third-party platform delivery and merchant self-delivery. This is of great significance for the development of the omnichannel catering industry.

This paper formulates the capacity decisions of omnichannel catering merchants under the third-party platform delivery and merchant self-delivery mode. The authors mainly use queuing theory to analyze the queuing behavior of online and offline customers, and the impact of waiting time on customer shopping behavior. In addition, the authors also characterize the merchant’s capacity by the rate in queuing model.

The authors find that capacities at ordering stage and food production stage are composed of base capacities and safety capacities, but the delivery capacities only have the latter. And in the self-delivery mode, merchants can develop higher safety capacities by charging delivery fees. The authors prove that regardless of the delivery mode, omnichannel sales can bring higher profits to merchants by integrating demand.

The authors focus on analyzing the capacity management of omnichannel catering merchants at the ordering, production and delivery stages. And the authors also add the delivery process into the omnichannel for analysis, so as to solve the problem of capacity decision-making under different delivery modes. The management of delivery capacity and its impact on other stages’ capacities are not covered in other literature studies, which is one of the main innovations of this paper.

This paper aims to clarify the relationship between the cone bit seal failure and the down-hole drilling fluid pressure and high temperature that occur during ultra-deep well drilling. It proposes that the contact pressure distribution under low pressure conditions is favourable for lubrication and the seal inner wear is serious under high pressure conditions. Furthermore, the more reliable cone bit seal can be obtained using the back propagation (BP) neural network and genetic algorithm (GA) to reduce the drilling cost.

The wear morphologies of the seal surface were analyzed using Contour GT-K to determine the seal contact pressure distribution. Then, the influences of the drilling fluid pressure and high temperature on the metal seal interface were analyzed using finite element method. The structural parameters of the seal under high pressure were optimized based on the BP neural network and GA.

This paper proposes that the inner seal contact pressure increases rapidly with an increase in the drilling fluid pressure. The design parameters of the seal components should be adjusted reasonably to ensure that the outer contact pressure is greater than the inner contact pressure, which is advantageous for forming a lubricant film on the inner side of the seal. The uneven temperature distribution of the seal surface will further aggravate seal failure.

Study on the bit seal with good property is significant in drilling application, and the optimized seal can prolong the cone bit life.

As a major agricultural province in central China, Hubei Province mainly carries out the peasant household credit investigation system through rural credit cooperatives (RCCs). The purpose of this paper is to evaluate the efficiency of the peasant household credit investigation system in Hubei RCCs and provide some evidence and ideas to the formulation of relevant policies.

First, this paper briefly reviews the related literature of the efficiency in credit investigation system; second, the paper gives a brief description of the data envelopment analysis (DEA) model and designs the indicators for efficiency evaluation; third, the paper accounts data sources and processing methods; and finally, the paper performs the empirical analysis and draws a conclusion.

The paper finds that the efficiency of the resource allocation in both regions is unoptimistic, the general efficiency is somewhat low, and it shows the trend of declination. The efficiency of pure technology in two regions represents the adverse trend. Every year's average scale efficiency in both regions is higher than the pure technology efficiency.

The main contributions of this paper include the first use of DEA model to practically evaluate the efficiency of credit investigation system based on 54 samples of RCCs in Hubei Province and the horizontal and vertical comparisons of the results. The conclusions of this paper not only make the efficiency of credit investigation system in the province's 54 credit cooperatives comparable but also has a great application value to the actual decision‐making departments in formulating credit policies, and each credit cooperative in further building the credit investigation system according to its own conditions. Moreover, it has certain reference value to other similar studies.

This chapter builds on the authors’ research into the internationalization of China’s higher education (HE) as soft power with “Chinese characteristics” (Lo & Pan, 2020). It rethinks the “Chinese characteristics” in contemporary China’s internationalization of HE as soft power, by contextualizing them in the historico-cultural rootedness that legitimizes the sense of Chinese exceptionalism in the Party-state’s global re-emergence. It also sheds light on the tension and paradox therein through analyzing the conflicts generated by the Party-state’s attempts at re-globalizing the Chinese world order alongside the Westphalian system. In addition to integrating the soft-power concepts coined by Joseph Nye (1990) with the dimensional perspectives on the internationalization of HE framed by Jane Knight (1997), this study also puts in China’s perspectives that stand in contrast to, and yet in confluence with, some of the current norms and values being espoused by the West. In so doing, it demonstrates the potentiality of employing comparative lenses that cut across times, spaces and cultures in the research into internationalization of HE as soft power with national characteristics.

The purpose of this paper is to combine triboelectric nanogeneration technology with ball bearing structure to achieve energy collection and fault monitoring.

In this paper, according to the rotation mode of ball bearings, the freestanding mode of triboelectric nanogeneration is selected to design and manufacture a novel triboelectric nanogeneration device Rolling Ball Triboelectric Nanogenerator (RB-TENG) which combines rotary energy collection with ball bearing fault self-sensing.

The 10,000s continuous operation experiment of the RB-TENG is carried out to verify its robustness. The accurate feedback relationship between the RB-TENG and rotation velocity can be demonstrated by the fitting comparison between the theoretical and experimental electrical signal periods at a certain time. By comparing the output electrical signals of the normal RB-TENG and the rotor spalling RB-TENG and polytetrafluoroethylene (PTFE) balls with different degrees of wear at 500 r/min, it can be concluded that the RB-TENG has an ideal monitoring effect on the radial clearance distance of bearings. The spalling fault test of the RB-TENG stator inner ring and rotor outer ring is carried out.

Through coupling experiments of rotor spalling fault of the RB-TENG and PTFE balls fault with different degrees of wear, it can be seen that when rotor spalling fault occurs, balls wear has a greater impact on the normal operation of the RB-TENG, and it is easier to identify. The fault self-sensing ability of the RB-TENG can be obtained, which is expected to provide an effective scheme for monitoring the radial wear clearance distance of ball bearings.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2024-0295/

Expert systems are computer-based systems that mimic the logical processes of human experts or organizations to give advice in a specific domain of knowledge. Fuzzy expert systems use fuzzy logic to handle uncertainties generated by imprecise, incomplete and/or vague information. The purpose of this paper is to present a comprehensive review of the methods and applications in fuzzy expert systems.

The authors have carefully reviewed 281 journal publications and 149 conference proceedings published over the past 37 years since 1982. The authors grouped the journal publications and conference proceedings separately accordingly to the methods, application domains, tools and inference systems.

The authors have synthesized the findings and proposed useful suggestions for future research directions. The authors show that the most common use of fuzzy expert systems is in the medical field.

Fuzzy logic can be used to manage uncertainty in expert systems and solve problems that cannot be solved effectively with conventional methods. In this study, the authors present a comprehensive review of the methods and applications in fuzzy expert systems which could be useful for practicing managers developing expert systems under uncertainty.