Search results

In order to discover a new adsorbent that can be used to purify dye wastewater in the textile and apparel industry, a novel type of graphene oxide/gluten composite material using an improved acid bath coagulation method was synthesized, which can remove methylene blue in an aqueous environment.

After experimentally compounding different ratios of graphene oxide and gluten, the graphene oxide/gluten composite material with 20% graphene oxide content and superlative adsorption effect was chosen. The synthesized material was characterized by different techniques such as FT-IR and SEM, indicating the microstructure of the material and the success of the composite. Various factors were considered, namely, the influence of temperature, dosage, pH and contact time. The isotherms, kinetics and thermodynamic parameters were successively discussed.

The qmax value of 214.29 mg/g of the material was higher compared to the general sorbent, thus, the graphene oxide/gluten composite material was a suitable sorbent for methylene blue removal. Overall, the graphene oxide/gluten composite material can be considered as an effectual and prospective adsorbent to remove methylene blue in the textile and apparel industrial effluent.

Graphene oxide is a potentially excellent sorbent. However, the high dispersibility of GO is detrimental to adsorption, it disperses rapidly in an aqueous solution making separation and recovery difficult. The high load capacity and recyclability of gluten as a colloid make it a suitable carrier for fixing GO. Studies on the combination of GO and GT into composite adsorption material and for the removal of dyes from dyeing wastewater have not been reported. The composite material research on GO and GT can provide new ideas for the research of these kinds of materials and contribute to its wider and convenient application in wastewater treatment.

The purpose of this paper is to purify the wastewater in the garment industry.

The preparation of the calcium alginate (CA)/activated carbon (AC) composite membrane was achieved by vacuum freeze-drying and the cross-linking reaction between sodium alginate and CaCl₂. Effective parameters in the methylene blue (MB) adsorption such as temperature, dose, contact time and pH were discussed. The adsorption properties of the composite membrane were investigated by isotherm, kinetics and thermodynamic analysis. The adsorption equilibrium data were described by the adsorption isotherm Langmuir model and the Freundlich model. The pseudo-first-order, pseudo-second-order and intra-particle diffusion equations were selected to evaluate the kinetics. The thermodynamic study described that the adsorption reaction was spontaneous and exothermic.

The AC/CA membrane is an efficient and powerful adsorbent to remove MB in printing and dyeing wastewater, and provides a new idea for the selection of adsorption materials for industrial printing and dyeing wastewater.

The composite membrane research on CA and AC can provide new ideas for the research of these kinds of materials.

The paper contributes to its wider and convenientapplication in wastewater treatment.

Studies on the combination of CA and AC into adsorption membranes and for the removal of dyes from printing and dyeing wastewater have not been reported. A novel composite material is provided for treatment dyeing wastewater in garment production. The composite membrane research on CA and AC can provide new ideas for the research of these kinds of materials and contribute to its wider and convenient application in wastewater treatment.

Inkjet printing is becoming increasingly important and popular for the printing of textiles. As one of the environmentally friendly processes, the plasma has been widely used to modify the surface properties of inkjet printing substrates. The purpose of this paper is to investigate the nano-modification of plasma on polyester fabric for pigment inkjet printing. The actual printing performance and the related mechanical behavior of samples were also evaluated.

Polyester fabrics were surface modified by atmospheric pressure air plasma with the aim to improve its inkjet printing performance. The effects of plasma treatment on surface properties of fabrics were characterized using X-ray photoelectron spectroscopy (XPS) and Scanning electron microscopy (SEM). The wettability of the samples is evaluated by measurement of contact angles of different polar liquids and surface energy. Breaking strength and elongation, bending rigidity are tested to evaluate the mechanical behavior of treated and control fabrics.

It was found that the nano-modification of plasma markedly improved the anti-bleeding property of inkjet printing fabrics. SEM and XPS analyses indicated that this improved color performance was mainly contributed by not only the etching effect and oxygen containing polar groups induced onto fiber surfaces. In addition, the results of mechanical behavior test indicate no evident reduction of breaking strength and breaking elongation both in warp and weft direction after plasma modification.

The surface modification method used here offers an economic and dependable way for pretreatment of inkjet printing fabrics with the advantages of environmental friendly over traditional pretreatment methods.

This study aims to investigate whether and how a high turnover rate stimulates employees to engage more in learning behavior.

Drawing on self-regulation theory, the authors suggest that the motive for employees to engage in learning behavior is to improve themselves. Such a need can be activated when they reflect on themselves and realize the discrepancy between their current selves and desired future selves. The authors argue that the employees’ perceived poor performance at daily work may induce their desire for self-improvement via making the future work selves salient, and in turn engage more in learning behavior. This is particularly so when turnover rate is high because employees may be alert of and concerned more about their own poor performance. In an experience sampling study, the authors obtained evidence for these hypotheses.

When turnover rate was high, employees’ poor performance increased salience of future work selves, which in turn facilitated their learning behavior. This relationship was not significant when turnover rate was low.

Contrary to the typical view that high turnover rate leads to knowledge loss for the companies, the present study findings suggest that it could also serve as a motivational factor facilitating employees’ learning behavior, which is an important way to increase knowledge pool of the companies.

The purpose of this paper is to experimentally and numerically study the transient hydraulic impact and overall performance during startup accelerating process of mixed-flow pump.

In this study, the impeller rotor vibration characteristics during the starting period under the action of fluid–structure interaction was investigated, which is based on the bidirectional synchronization cooperative solving method for the flow field and impeller structural response of the mixed-flow pump. Experimental transient external characteristic and the transient dimensionless head results were compared with the numerical calculation results, to validate the accuracy of numerical calculation method. Besides, the deformation and dynamic stress distribution of the blade under the stable rotating speed and accelerating condition were studied based on the bidirectional fluid–structure interaction.

The results show that the combined action of complex hydrodynamic environment and impeller centrifugal force in the startup accelerating process makes the deformation and dynamic stress of blade have the rising trend of reciprocating oscillation. At the end of acceleration, the stress and strain appear as transient peak values and the transient effect is nonignorable. The starting acceleration has a great impact on the deformation and dynamic stress of blade, and the maximum deformation near the rim of impeller outlet edge increases 5 per cent above the stable condition. The maximum stress value increases by about 68.7 per cent more than the steady-state condition at the impeller outlet edge near the hub. The quick change of rotating speed makes the vibration problem around the blade tip area more serious, and then it takes the excessive stress concentration and destruction at the blade root.

This study provides basis and reference for the safety operation of pumps during starting period

In the ongoing Industry 4.0 era, the internet of things (IoT) has become a global race in the current information technology climate. However, little is understood about the pattern of the global competitive arena or its players’ set up strategy. This paper aims to attempt to compare the cross-country development of the IoT industry. In particular, from the lens of industrial policies, this paper highlights how China, as a latecomer, gains momentum to emerge victorious as a leader in this global race.

Based on five dimensions, namely, foundation, trajectory, characteristic, application and social impacts, this paper presents the evolution of the IoT industry in the USA, European Union, Japan, South Korea and China. From the lens of windows of opportunities, this paper analyzes how China seized the opportunity with the emerging technology, thereby, enabling it to create a competitive advantage.

This paper finds that China’s IoT industry takes a distinct trajectory, where scientific institutions, enterprises and governmental policies collaborate in unison, during which the first phase was when scientific research institutions introduced the conceptual new technology from developed countries. This technological foresight allowed for the identification and realization of critical technologies, strategic fields and technological trends. The second phase was the continuous dissatisfaction of capabilities of critical technologies, which creates disruptions that significantly altered the environment of technological competition.

This paper provides a comprehensive and comparative review of IoT industries in a global context, with the critical and influential role of the windows of opportunities on those enterprises lagging behind the technological wave.

This study aims to build an indigenous Chinese management model based on Chinese culture.

This study adopts new institutionalism as its theoretical foundation, examines the core values of Chinese civilization in retrospect and identifies the key features of a Chinese management model. In this study, the authors develop a “glacier model” and test its reliability with the Haier Group.

This study proposes a new definition for a management model: a knowledge system based on institutional civilization that reflects management theory and practice. It analyzes the institutional environment of Chinese civilization: the recessive bottom-most layers are CBTLG (Confucianism, Taoism, Buddhism, legalism and Guan theory) and MDSX (Mao Zedong thought, Deng Xiaoping theory, scientific thoughts of development and Xi Jinping thought), the dominant principles are “Socialism and Mixed Economy” and the core values of Chinese culture compose the layer between them. This study concludes that the distinguishing features of Chinese management are harmonious management, the order-diversity pattern and Tai Chi management.

This paper only discussed the management model of China. Based on the conclusions of this paper, in the future, researchers comparative studies on Chinese management and other countries’ management models with glacier model. By so doing, people can have a more comprehensive understanding of management models of different cultures.

The management characteristics contained in Chinese culture can provide more abundant knowledge for understanding current organizational management issues. A better understanding of the characteristics of a Chinese management model based on Chinese civilization is conducive to foreign investment or cross-cultural cooperation between Chinese and foreign enterprises.

This study provides a new perspective in studying Chinese management. The theoretical values of the glacier model are as follows: it is rooted in a Chinese management context; it makes up for the insufficiency in the current study of institutionalism; and it guides cross-cultural communication and management. The authors hope that the study attracts the attention of more scholars. Any civilization of any region or country can construct its own management model using the frame of the glacier model.

The purpose of this paper is to bring out the possibility of selecting good leaders in Asian countries, i.e., China and Singapore.

Since comparative historical analysis enhances the objectivity for academic discussion, Deng Xiaoping’s and Lee Kuan Yew’s leadership successions have been chosen as the cases for studies by virtue of “method of agreement”. Incorporating “argument based on the contrary” into the context for macro-historical analysis, this paper characterises the duo’s successful (at least quite successful) leadership successions, thus offering an alternative paradigm beyond Western-style democracy.

Both cases of post-Mao China and the independent Singapore indicate that in quite a number of Asian countries, good leaders could still be selected beyond universal suffrage as practised among Western Electoral Democracies, mainly because of the elites-driven context. As to the duo’s succession results, Deng Xiaoping’s selection of leaders was somewhat successful, while Lee Kuan Yew’s was phenomenal.

This paper offers readers a glance over the possibility of selecting good leaders in Asian countries not fully based on Western-style democracy. Learning from the duo’s leadership successions, the West may treat elite politics as the supplement under Western Electoral Democracies in order to avoid their countries falling into the trap of populism. The West could meanwhile consider the exceptional criteria prized by the duo for leadership successions. Considering such interactions among elites in the real-life context, it could serve as an alternative model to Western-style democracy.

The purpose of this paper is to present a scan matching simultaneous localization and mapping (SLAM) algorithm based on particle filter to generate the grid map online. It mainly focuses on reducing the memory consumption and alleviating the loop closure problem.

The proposed method alleviates the loop closure problem by improving the accuracy of the robot’s pose. First, two improvements were applied to enhance the accuracy of the hill climbing scan matching. Second, a particle filter was used to maintain the diversity of the robot’s pose and then to supply potential seeds to the hill climbing scan matching to ensure that the best match point was the global optimum. The proposed method reduces the memory consumption by maintaining only a single grid map.

Simulation and experimental results have proved that this method can build a consistent map of a complex environment. Meanwhile, it reduced the memory consumption and alleviates the loop closure problem.

In this paper, a new SLAM algorithm has been proposed. It can reduce the memory consumption and alleviate the loop closure problem without lowering the accuracy of the generated grid map.

In acoustic detection technology, optical microcavities offer higher detection bandwidth and sensitivity than traditional acoustic sensors. However, research on acoustic detection technologies involving optical microcavities has not yet been reported. Therefore, this paper aims to design and construct an underwater acoustic detection system based on optical microcavities and study its acoustic detection technology to improve its performance.

Based on the principles of optical microcavity acoustic sensors, a signal-detection circuit was designed to form a detection system in conjunction with a laser, an optical waveguide resonator and an oscilloscope. This circuit consists of two modules: a photodetection module and a filter amplification module.

The photodetection module features a baseline noise of −106.499 dBm and can detect device spectral line depths of up to 2410 mV. The gain stability of the filter amplification module was 58 dB ± 1 dB with a noise gain of −107.626 dBm. This design allows the acoustic detection system to detect signals with high sensitivity within the 10 Hz−1.2 MHz frequency band, achieving a maximum sensitivity of −126 dB re 1 V/µPa at 800 Hz and a minimum detectable pressure (MDP) of 0.37 mPa/Hz^1/2, corresponding to a noise equivalent pressure (NEP) of 51.36 dB re 1 V/µPa.

This study designs and constructs a broadband underwater acoustic detection system specifically for optical waveguide resonators based on the sensing principles of silicon dioxide optical waveguide resonators. Experiments demonstrated that the signal detection module improves the sensitivity of underwater acoustic detection based on optical waveguides.