Search results

Digital transformation (DT) is among the vital factors contributing to innovation ambidexterity, especially for advanced manufacturing firms (AMFs). However, the empirical studies on the relationship between DT and innovation ambidexterity in AMFs from the perspective of knowledge management are inadequate. Therefore, this study aims to systematically analyze the impact of DT on innovation ambidexterity and its mechanism of action.

This study selects 254 listed firms within the ten key areas of “Made in China 2025,” as they occupy a key position in China’s advanced manufacturing system. Based on the knowledge-based view (KBV) and contingency theory, it constructs a model of the influence mechanism of DT on innovation ambidexterity.

The results show that the DT of AMFs positively influence innovation ambidexterity. External pressure from environmental turbulence enhances the positive relationship between DT and innovation ambidexterity, demonstrating the “resilience effect,” external knowledge search (EKS) and broadening the knowledge base mediating roles between them, highlighting the “accumulation effect.”

By identifying this mediation mechanism of DT and innovation ambidexterity, this study provides new ideas for path research on the KBV. Moreover, this study explores the triggering effect of market environmental turbulence on the DT of firms. It reveals the boundary conditions of DT acting on innovation ambidexterity, expands the research perspective on organizational resilience and enriches the theory of power change.

This study aims to discuss the influences of surface severe plastic deformation (S²PD) on the electrochemical corrosion, pitting corrosion, intergranular corrosion, stress corrosion cracking of aluminum (Al) alloys and attempt to correlate the microstructural/compositional changes with the performances.

This study provides a novel gradient design of structure/composition caused by S²PD for the purpose of enhancing Al alloys’ corrosion resistance.

S²PD has a significant effect on corrosion behavior of Al alloys through tuning the grain size, residual stress, composition, grain boundary phase and second phase particle distribution.

Although Al alloys are known to form a protective Al₂O₃ film, corrosion is a major challenge for the longevity of Al structures across numerous industries, especially for the infrastructures made of high-strength Al alloys. Traditional strategies of improving corrosion resistance of Al alloys heavily relied on alloying and coatings. In this review, gradient design of structure/composition caused by S²PD provides a novel strategy for corrosion protection of Al alloys, especially in the enhancement of localized corrosion resistance.

This paper aims to comprehensively achieve the requirements of high assembly precision and low cost, a precision-cost model of assembly based on three-dimensional (3D) tolerance is established in this paper.

The assembly precision is related to the tolerance of parts and the deformation of matching surfaces under load. In this paper, the small displacement torsor (SDT) theory is first utilized to analyze the manufacturing tolerances of parts and the assembly deformation deviation of matching surface. In the meanwhile, the extracting method of SDT parameters is proposed and the assembly precision calculation model based on the 3D tolerance is established. Second, an integrated optimization model based on the machining cost, assembly cost (mapping the deviation domain to the SDT domain) and quality loss cost is built. Finally, the practicability of the precision-cost model is verified by optimizing the horizontal machining center.

The assembly deviation has a great influence on cost fluctuation. By setting the optimization objective to maximize the assembly precision, the optimal total cost is CNY 72.77, decreasing by 16.83 per cent from the initial value, which meets economical requirements. Meanwhile, the upper bound of each processing tolerance is close to the maximum value of 0.01 mm, indicating that the load deformation can be offset by appropriately increasing the upper bound of the tolerance, but it is necessary to strictly restrict the manufacturing tolerances of lower parts in a reasonable range.

In this paper, a 3D deviation precision-cost model of assembly is established, which can describe the assembly precision more accurately and achieve a lower cost compared with the assembly precision model based on rigid parts.

The occurrence of segment cracks caused by load changes in shield tunnels would affect the safety of the tunnel structure. To this end, a three-dimensional fine shield tunnel segment model based on the extended finite element method (XFEM) is established.

The cracking law of shield segment cracks is studied in two forms: overloading and unloading. The relationship between crack length, width and depth and transverse convergence and deformation is analyzed.

The results show that the cracks in shield tunnels mainly occur on the outer side of the arch waist and the inner side of the crown and bottom. Under overloading and unloading conditions, the length, width and depth of cracks increase non-linearly as the transverse convergence deformation increases. Under the same convergent deformation, the deeper the buried depth, the smaller the crack length, width and depth. Meanwhile, under overloading conditions, the influence of buried depth on the width and depth of cracks is more significant. In terms of crack width and depth, unloading conditions are more dangerous than overloading conditions.

The findings have a guiding effect for the management of cracks in shield tunnels during operation.

This paper aims to distinguish the relationship between the morphology characteristics of different scales and the contact performance of the mating surfaces. Also, an integrated method of the spectrum analysis and the wavelet transform is used to separate the morphology characteristics of the actual machined parts.

First, a three-dimensional (3D) surface profilometer is used to obtain the surface morphology data of the actual machined parts. Second, the morphology characteristics of different scales are realized by the wavelet analysis and the power spectral density. Third, the reverse modeling engineering is used to construct the 3D contact models for the macroscopic characteristics. Finally, the finite element method is used to analyze the contact stiffness and the contact area of the 3D contact model.

The contact area and the nominal contact pressure Pn have a nonlinear relationship in the whole compression process for the 3D contact model. The percentage of the total contact area of the macro-scale mating surface is about 70 per cent when the contact pressure Pn is in the range of 0-100 MPa, and the elastic contact area accounts for the vast majority. Meanwhile, when the contact pressure Pn is less than 10MPa, the influence factor (the relative error of contact stiffness) is larger than 50 per cent, so the surface macro-scale morphology has a weakening effect on the normal contact stiffness of the mating surfaces.

This paper provides an effective method for the multi-scale separation of the surface morphology and then lays a certain theoretical foundation for improving the surface quality of parts and the morphology design.

The traditional precision design only takes the influence of geometric tolerance of the parts and does not involve the load deformation in the assembly process. This paper aims to analyze the influence mechanism of flexible parts deformation on the geometric precision, and then to ensure the reliability and stability of the mechanical system.

Firstly, this paper adopts the N-GPS to analyze the influence mechanism of flexible parts deformation on the geometric precision and constructs a coupling 3D tolerance mathematical model of the geometric tolerance and the load deformation deviation based on the SDT theory, homogeneous coordinate transformation theory and surface authentication idea. Secondly, the least square method is used to fit the deformation surface of the mating surface under load so as to complete the conversion from the non-ideal element to the ideal element.

This paper takes the horizontal machining center as a case to obtain the deformation information of the mating surface under the self-weight load. The results show that the deformation deviation of the parts has the trend of transmission and accumulation under the load. The terminal deformation cumulative amount of the system is up to –0.0249 mm, which indicated that the influence of parts deformation on the mechanical system precision cannot be ignored.

This paper establishes a comprehensive 3D tolerance mathematical model, which comprehensively considers the effect of the dimensional tolerance, geometric tolerance and load deformation deviation. By this way, the assembly precision of mechanical system can be accurately predicted.

This paper aims to study the relationship between normal contact stiffness and contact load. It purpose a new calculation model of the normal contact stiffness of joint surfaces by considering the elastic–plastic critical deformation change of asperities contact.

The paper described the surface topography of joint surfaces based on fractal geometry, and fractal parameters and of fractal function derived from measurement data. According to the plastic–elastic contact theory, the contact deformation characteristic of asperities was analyzed; the critical deformation estimation model was presented, which expressed critical deformation as the function of fractal parameters and contact deformation; the contact stiffness calculation model of single asperity was brought forward by considering critical deformation change.

The paper combined the surface topography description function, analyzed the asperity contact states by considering the critical deformation change, and calculated normal contact stiffness based on fractal theory and contact deformation analysis. The comparison between theoretical contact stiffness and experimental data indicated that the theoretical normal contact stiffness agreed with the experimental data, and the estimation model for normal contact stiffness was appropriate.

Owing to the possibility of plastic deformation during the loading process, the experimental curve between the contact stiffness and the contact load is nonlinear, resulting in an error between the experimental results and the theoretical calculation results.

The paper established the relationship between critical deformation and fractal surface topography by constructing asperity distribution function. The paper proposed a new normal contact stiffness calculation model of joint surfaces by considering the variation of critical deformation in contact process.

Aluminium alloys can be used as lightweight and high-strength materials in combination with the technology of laser beam welding, an efficient joining method, in the manufacturing of automotive parts. The purposes of this paper are to conduct laser welding experiments with Al2024 in the lap joint configuration, model the laser welding process parameters of Al2024 alloys and use propounded models to optimize the process parameters.

Laser welding of Al2024 alloy has been conducted in the lap joint configuration. Then, the influences of explanatory variables (laser peak power, scanning speed and frequency) on outcome variables (weld width [WW], throat length [TL] and breaking load [BL]) have been investigated with Poisson regression analysis of the data set derived from experimentation. Thereafter, a multi-objective genetic algorithm (MOGA) has been used using MATLAB to find the optimum solutions. The effects of various input process parameters on the responses have also been analysed using response surface plots.

The promulgated statistical models, derived with Poisson regression analysis, are evinced to be well-fit ones using the analysis of deviance approach. Pareto fronts have been used to demonstrate the optimization results, and the maximized load-bearing capacity is computed to be 1,263 N, whereas the compromised WW and TL are 714 µm and 760 µm, respectively.

This work of conducting laser welding of lap joint of Al2024 alloy incorporating the Taguchi method and optimizing the input process parameters with the promulgated statistical models proffers a neoteric perspective that can be useful to the manufacturing industry.

Vehicle weight reduction represents a viable means of meeting tougher regulatory requirements designed to reduce fuel consumption and control greenhouse gas emissions. This paper aims to present an empirical and comparative analysis of lightweight magnesium materials used to replace conventional steel in passenger vehicles with internal combustion engines. The very low density of magnesium makes it a viable material for lightweighting given that it is lighter than aluminium by one-third and steel by three-fourth.

A structural evaluation case study of the “open access” Wikispeed car was undertaken. This included an assessment of material design characteristics such as bending stiffness, torsional stiffness and crashworthiness to evaluate whether magnesium provides a better alternative to the current usage of aluminium in the automotive industry.

The Wikispeed car had an issue with the rocker beam width/thickness (b/t) ratio, indicating failure in yield instead of buckling. By changing the specified material, Aluminium Alloy 6061-T651 to Magnesium EN-MB10020, it was revealed that vehicle mass could be reduced by an estimated 110 kg, in turn improving the fuel economy by 10 per cent. This, however, would require mechanical performance compromise unless the current design is modified.

This is the first time that a comparative analysis of material substitution has been made on the Wikispeed car. The results of such work will assist in the lowering of harmful greenhouse gas emissions and simultaneously augment fuel economy.

The modernization of China’s economy is an integral part of Chinese-style modernization. According to the principle of unifying theoretical, historical and practical logic, theoretically explaining the modernization of China’s economy is both a political necessity and a higher scientific requirement.

Following this evolutionary line – from modes of production to the general economic development mechanism and then to patterns of economic operation and development – this paper employs the principal contradiction analysis method to offer an interpretation of China’s economic modernization from the broad Marxist political economy perspective.

In economic terms, “get organized” primarily refers to the development and mutual promotion of team-based and market-based division of labor organizations, as discussed by Karl Marx. “Get organized” (specifically the development of team-based division of labor organizations) acts as the engine of China’s economic modernization and serves as the historical logical starting point. Division of labor is the theoretical logical starting point for interpreting China’s economic modernization. The two of them are congruent, achieving the unity of theoretical and historical logic at the starting point. The development and mutual promotion of these “two types of division of labor” inherently generate the general mechanism of economic development first comprehensively discussed by Marx and Friedrich Engels, which involves the division of labor development and market expansion accumulating cyclically and reinforcing each other. This mechanism drives both the high-speed and high-quality development of China’s economic modernization.

The broad Marxist political economy paradigm facilitates explaining China’s economic modernization theoretically, historically and practically with unified logic. “Get organized” serves as both the engine and the realization mechanism of this modernization, with the Communist Party of China (CPC) consistently being the core force of this organizational effort.