Search results

1 – 10 of 118
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 18 November 2019

Atul Kumar Ray and Vasu B.

This paper aims to examine the influence of radiative nanoparticles on incompressible electrically conducting upper convected Maxwell fluid (rate type fluid) flow over a…

74

Abstract

Purpose

This paper aims to examine the influence of radiative nanoparticles on incompressible electrically conducting upper convected Maxwell fluid (rate type fluid) flow over a convectively heated exponential stretching sheet with suction/injection in the presence of heat source taking chemical reaction into account. Also, a comparison of the flow behavior of Newtonian and Maxwell fluid containing nanoparticles under the effect of different thermophysical parameters is elaborated. Velocity, temperature and nanoparticle volume fractions are assumed to have exponential distribution at boundary. Buongiorno model is considered for nanofluid transport.

Design/methodology/approach

The equations, which govern the flow, are reduced to ordinary differential equations using suitable transformation. The transformed equations are solved using a robust homotopy analysis method. The convergence of the homotopy series solution is explicitly discussed. The present results are compared with the results reported in the literature and are found to be in good agreement.

Findings

It is observed from the present study that larger relaxation time leads to slower recovery, which results in a decrease in velocity, whereas temperature and nanoparticle volume fraction is increased. Maxwell nanofluid has lower velocity with higher temperature and nanoparticle volume fraction when compared with Newtonian counterpart. Also, the presence of magnetic field leads to decrease the velocity of the nanofluid and enhances the skin coefficient friction. The existence of thermal radiation and heat source enhance the temperature. Further, the presence of chemical reaction leads to decrease in nanoparticle volume fraction. Higher value of Deborah number results in lower the rate of heat and mass transfer.

Originality/value

The novelty of present work lies in understanding the impact of fluid elasticity and radiative nanoparticles on the flow over convectively heated exponentially boundary surface in the presence of a magnetic field using homotopy analysis method. The current results may help in designing electronic and industrial applicants. The present outputs have not been considered elsewhere.

Access Restricted. View access options
Article
Publication date: 19 December 2018

Vasu B. and Atul Kumar Ray

To achieve material-invariant formulation for heat transfer of Carreau nanofluid, the effect of Cattaneo–Christov heat flux is studied on a natural convective flow of Carreau…

229

Abstract

Purpose

To achieve material-invariant formulation for heat transfer of Carreau nanofluid, the effect of Cattaneo–Christov heat flux is studied on a natural convective flow of Carreau nanofluid past a vertical plate with the periodic variations of surface temperature and the concentration of species. Buongiorno model is considered for nanofluid transport, which includes the relative slip mechanisms, Brownian motion and thermophoresis.

Design/methodology/approach

The governing equations are non-dimensionalized using suitable transformations, further reduced to non-similar form using stream function formulation and solved by local non-similarity method with homotopy analysis method. The numerical computations are validated and verified by comparing with earlier published results and are found to be in good agreement.

Findings

The effects of varying the physical parameters such as Prandtl number, Schmidt number, Weissenberg number, thermophoresis parameter, Brownian motion parameter and buoyancy ratio parameter on velocity, temperature and species concentration are discussed and presented through graphs. The results explored that the velocity of shear thinning fluid is raised by increasing the Weissenberg number, while contrary response is seen for the shear thickening fluid. It is also found that heat transfer in Cattaneo–Christov heat conduction model is less than that in Fourier’s heat conduction model. Furthermore, the temperature and thermal boundary layer thickness expand with the increase in thermophoresis and Brownian motion parameter, whereas nanoparticle volume fraction increases with increase in thermophoresis parameter, but reverse trend is observed with increase in Brownian motion parameter.

Originality/value

The present investigation is relatively original as very little research has been reported on Carreau nanofluids under the effect of Cattaneo–Christov heat flux model.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 29 no. 2
Type: Research Article
ISSN: 0961-5539

Keywords

Access Restricted. View access options
Article
Publication date: 25 June 2019

Atul Kumar Ray, Vasu B., O. Anwar Beg, R.S.R. Gorla and P.V.S.N. Murthy

This paper aims to numerically investigate the two-dimensional unsteady laminar magnetohydrodynamic bioconvection flow and heat transfer of an electrically conducting…

235

Abstract

Purpose

This paper aims to numerically investigate the two-dimensional unsteady laminar magnetohydrodynamic bioconvection flow and heat transfer of an electrically conducting non-Newtonian Casson thin film with uniform thickness over a horizontal elastic sheet emerging from a slit in the presence of viscous dissipation. The composite effects of variable heat, mass, nanoparticle volume fraction and gyrotactic micro-organism flux are considered as is hydrodynamic (wall) slip. The Buongiorno nanoscale model is deployed which features Brownian motion and thermophoresis effects. The model studies the manufacturing fluid dynamics of smart magnetic bio-nano-polymer coatings.

Design/methodology/approach

The coupled non-linear partial differential boundary-layer equations governing the flow, heat and nano-particle and micro-organism mass transfer are reduced to a set of coupled non-dimensional equations using the appropriate transformations and then solved as an nonlinear boundary value problem with the semi-numerical Liao homotopy analysis method (HAM).Validation with a generalized differential quadrature (GDQ) numerical technique is included.

Findings

An increase in velocity slip results in a significant decrement in skin friction coefficient and Sherwood number, whereas it generates a substantial enhancement in Nusselt number and motile micro-organism number density. The computations reveal that the bioconvection Schmidt number decreases the micro-organism concentration and boundary-layer thickness which is attributable to a rise in viscous diffusion rate. Increasing bioconvection Péclet number substantially elevates the temperatures in the regime, thermal boundary layer thickness, nanoparticle concentration values and nano-particle species boundary layer thickness. The computations demonstrate the excellent versatility of HAM and GDQ in solving nonlinear multi-physical nano-bioconvection flows in thermal sciences and furthermore are relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.

Research limitations/implications

The numerical study is valid for two-dimensional, unsteady, laminar Casson film flow with nanoparticles over an elastic sheet in presence of variable heat, mass and nanoparticle volume fraction flux. The film has uniform thickness and flow is transpiring from slit which is fixed at origin.

Social implications

The study has significant applications in the manufacturing dynamics of nano-bio-polymers and the magnetic field control of materials processing systems. Furthermore, it is relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.

Originality/value

The originality of the study is to address the simultaneous effects of unsteady and variable surface fluxes on Casson nanofluid transport of gyrotactic bio-convection thin film over a stretching sheet in the presence of a transverse magnetic field. Validation of HAM with a GDQ numerical technique is included. The present numerical approaches (HAM and GDQ) offer excellent promise in simulating such multi-physical problems of interest in thermal thin film rheological fluid dynamics.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 29 no. 11
Type: Research Article
ISSN: 0961-5539

Keywords

Access Restricted. View access options
Article
Publication date: 20 March 2019

Vasu B.

The purpose of this study is to present the magnetohydrodynamic (MHD) flow and heat transfer in an accelerating film of a non-Newtonian pseudo-plastic nanofluid along an inclined…

88

Abstract

Purpose

The purpose of this study is to present the magnetohydrodynamic (MHD) flow and heat transfer in an accelerating film of a non-Newtonian pseudo-plastic nanofluid along an inclined surface with viscous dissipation and Joule heating.

Design/methodology/approach

An incompressible and inelastic fluid is assumed to obey the Ostwald-de-Waele power law model and the action of viscous stresses is confined to the developing momentum boundary layer adjacent to the solid surface. Viscous dissipation and Joule heating on the flow of electrically conducting film in the presence of uniform transverse magnetic field is considered for the Carboxyl Methyl Cellulose (CMC) water-based nanofluid. The fluid is the CMC-water-based with concentration (0.1-0.4 per cent) containing three types of nano-solid particles Cu, Al2O3 and TiO2. The modeled boundary layer conservation equations are transformed to dimensionless, coupled and highly non-linear system of differential equations, and then solved numerically by means of a local non-similarity approach with shooting technique. To validate the numerical results, a comparison of the present results is made with the earlier published results and is found to be in good agreement.

Findings

The effects of magnetic parameter, Prandtl number, Eckert number and Biot numbers on the velocity and temperature fields are presented graphically and discussed for various values of thermo-physical parameters. It has been found that magnetic field decelerates the fluid velocity for both cases of Newtonian nanofluid and pseudo-plastic nanofluid because of the generated drag-like Lorentz force. This is of great benefit in magnetic materials processing operations, utilizing static transverse uniform magnetic field, as it allows a strong regulation of the flow field.

Research limitations/implications

The numerical study is valid for two-dimensional, steady, laminar film flow of Ostwald-de-Waele power law non-Newtonian nanofluid along an inclined plate. A uniform transverse magnetic field of strength B0 is applied perpendicular to the wall. Assume that the base fluid and the nano-solid particles are in thermal equilibrium with no slip effects. The interaction of magnetic field with nanofluid has several potential implications and may be used to deal with the problems such as cooling nuclear reactors by liquid sodium and inducting the flow meter which depends on the potential difference in the fluid along the direction perpendicular to the motion and to the magnetic field.

Practical implications

The study has significant applications in magnetic field control of materials processing systems.

Originality/value

The results of the present study may be attentiveness to the engineers and applied mathematicians who are interested in hydrodynamics and heat transfer enhancement associated with film flows.

Details

World Journal of Engineering, vol. 16 no. 1
Type: Research Article
ISSN: 1708-5284

Keywords

Access Restricted. View access options
Article
Publication date: 21 August 2021

Yu Bai, Qing Wang and Yan Zhang

This paper aims to examine the unsteady stagnation-point flow, heat and mass transfer of upper-convected Oldroyd-B nanofluid along a stretching sheet. The thermal conductivity is…

138

Abstract

Purpose

This paper aims to examine the unsteady stagnation-point flow, heat and mass transfer of upper-convected Oldroyd-B nanofluid along a stretching sheet. The thermal conductivity is taken in a temperature-dependent fashion. With the aid of Cattaneo–Christov double-diffusion theory, relaxation-retardation double-diffusion model is advanced, which considers not only the effect of relaxation time but also the influence of retardation time. Convective heat transfer is not ignored. Additionally, experiments verify that with sodium carboxymethylcellulose (CMC) solutions as base fluid, not only the flow curve conforms to Oldroyd-B model but also thermal conductivity decreases linearly with the increase of temperature.

Design/methodology/approach

The suitable pseudo similarity transformations are adopted to address partial differential equations to ordinary differential equations, which are computed analytically through homotopy analysis method (HAM).

Findings

It is worth noting that the increase of stagnation-point parameter diminishes momentum loss, so that the velocity enlarges, which makes boundary layer thickness thinner. With the increase of thermal retardation time parameter, the nanofluid temperature rises that implies heat penetration depth boosts up and the additional time required for nanofluid to heat transfer to surrounding nanoparticles is less, which is similar to the effects of concentration retardation time parameter on concentration field.

Originality/value

This paper aims to explore the unsteady stagnation-point flow, heat and mass transfer of upper-convected Oldroyd-B nanofluid with variable thermal conductivity and relaxation-retardation double-diffusion model.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 31 no. 11
Type: Research Article
ISSN: 0961-5539

Keywords

Access Restricted. View access options
Article
Publication date: 10 June 2021

Golam Mortuja Sarkar, Suman Sarkar and Bikash Sahoo

This paper aims to theoretically and numerically investigate the steady two-dimensional (2D) Hiemenz flow with heat transfer of Reiner-Rivlin fluid over a linearly…

213

Abstract

Purpose

This paper aims to theoretically and numerically investigate the steady two-dimensional (2D) Hiemenz flow with heat transfer of Reiner-Rivlin fluid over a linearly stretching/shrinking sheet.

Design/methodology/approach

The Navier–Stokes equations are transformed into self-similar equations using appropriate similarity transformations and then solved numerically by using shooting technique. A simple but effective mathematical analysis has been used to prove the existence of a solution for stretching case (λ> 0). Moreover, an attempt has been laid to carry the asymptotic solution behavior for large stretching. The obtained asymptotic solutions are compared with direct numerical solutions, and the comparison is quite remarkable.

Findings

It is observed that the self-similar equations exhibit dual solutions within the range [λc, −1] of shrinking parameter λ, where λc is the turning point from where the dual solutions bifurcate. Unique solution is found for all stretching case (λ > 0). It is noticed that the effects of cross-viscous parameter L and shrinking parameter λ on velocity and thermal fields show opposite character in the dual solution branches. Thus, a linear temporal stability analysis is performed to determine the basic feasible solution. The stability analysis is based on the sign of the smallest eigenvalue, where positive or negative sign leading to a stable or unstable solution. The stability analysis reveals that the first solution is stable that describes the main flow. Increase in cross-viscous parameter L resulting in a significant increment in skin friction coefficient, local Nusselt number and dual solutions domain.

Originality/value

This work’s originality is to examine the combined effects of cross-viscous parameter and stretching/shrinking parameter on skin friction coefficient, local Nusselt number, velocity and temperature profiles of Hiemenz flow over a stretching/shrinking sheet. Although many studies on viscous fluid and nanofluid have been investigated in this field, there are still limited discoveries on non-Newtonian fluids. The obtained results can be used as a benchmark for future studies of higher-grade non-Newtonian flows with several physical aspects. All the generated results are claimed to be novel and have not been published elsewhere.

Details

World Journal of Engineering, vol. 19 no. 4
Type: Research Article
ISSN: 1708-5284

Keywords

Access Restricted. View access options
Article
Publication date: 27 August 2024

RamReddy Chetteti, Sweta   and Pranitha Janapatla

This study aims to enhance heat transfer efficiency while minimizing friction factor and entropy generation in the flow of Nickel zinc ferrite (NiZnFe2O4) nanoparticles suspended…

36

Abstract

Purpose

This study aims to enhance heat transfer efficiency while minimizing friction factor and entropy generation in the flow of Nickel zinc ferrite (NiZnFe2O4) nanoparticles suspended in multigrade 20W-40 motor oil (as specified by the Society of Automotive Engineers). The investigation focuses on the effects of the melting process, nonspherical particle shapes, thermal dispersion and viscous dissipation on the nanofluid flow.

Design/methodology/approach

The fundamental governing equations are transformed into a set of similarity equations using Lie group transformations. The resulting set of equations is numerically solved using the spectral local linearization method. Additionally, sensitivity analysis using response surface methodology (RSM) is conducted to evaluate the influence of key parameters on response function.

Findings

Higher dispersion reduces entropy production. Needle-shaped particles significantly enhance heat transfer by 27.65% with melting and reduce entropy generation by 45.32%. Increasing the Darcy number results in a reduction of friction by 16.06%, lower entropy by 31.72% and an increase in heat transfer by 17.26%. The Nusselt number is highly sensitive to thermal dispersion across melting and varying volume fraction parameters.

Originality/value

This study addresses a significant research gap by exploring the combined effects of melting, particle shapes and thermal dispersion on nanofluid flow, which has not been thoroughly investigated before. The focus on practical applications such as fuel cells, material processing, biomedicine and various cooling systems underscores its relevance to sectors such as nuclear reactors, tumor treatments and manufacturing. The incorporation of RSM for friction factor analysis introduces a unique dimension to the research, offering novel insights into optimizing nanofluid performance under diverse conditions.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 34 no. 10
Type: Research Article
ISSN: 0961-5539

Keywords

Access Restricted. View access options
Article
Publication date: 28 July 2023

Amit Kumar, Abhipsa P. Dash, Atul Kumar Ray, Priyabrata Sethy and Idamakanti Kasireddy

This study aims to examine the flow of unsteady mixed convective hybrid nanofluid over a rotating sphere with heat generation/absorption. The hybrid nanofluid contains different…

111

Abstract

Purpose

This study aims to examine the flow of unsteady mixed convective hybrid nanofluid over a rotating sphere with heat generation/absorption. The hybrid nanofluid contains different shapes of nanoparticles (copper [Cu] and aluminium oxide [Al2O3]) in the base fluid (water [H2O]). The influence of different shapes (sphere, brick, cylinder, platelets and blades) of nanoparticle in water-based hybrid nanofluid is also investigated.

Design/methodology/approach

To analyse the nanomaterial, the flow model is established, and in doing so, the Prandtl’s boundary layer theory is incorporated into the present model. The bvp4c approach, i.e. finite difference method, is used to find the numerical solution of differential equations that is controlling the fluid flow. The effect of relevant flow parameters on nanofluid temperature and velocity profile is demonstrated in detailed explanations using graphs and bar charts, whereas numerical results for Nusselt number and the skin’s coefficient for various form parameters are presented in tabular form.

Findings

The rate of heat transfer is least for spherical-shaped nanoparticle because of its smoothness, symmetricity and isotropic behaviour. The rate of heat transfer is highest for blade-shaped nanoparticles as compared to other shapes (brick, cylindrical and platelet) of nanoparticles because the blade-shaped nanoparticles causes comparatively more turbulence flow in the nanofluid than other shapes of nanoparticle. Heat generation affects the temperature distribution and, hence, the particle deposition rate. The absorption of heat extracts heat and reduce the temperature across the rotating sphere. The heat generation/absorption parameter plays an important role in establishing and maintaining the temperature around the rotating sphere.

Research limitations/implications

The numerical study is valid with the exception of the fluctuation in density that results in the buoyancy force and the functional axisymmetric nanofluid transport has constant thermophysical characteristics. In addition, this investigation is also constrained by the assumptions that there is no viscosity dissipation, no surface slippage and no chemically activated species. The hybrid nanofluid Al2O3–Cu/H2O is an incompressible and diluted suspension. The single-phase hybrid nanofluid model is considered in which the relative velocity of water (H2O) and hybrid nanoparticles (Al2O3–Cu) is the same and they are in a state of thermal equilibrium.

Practical implications

Study on convective flow across a revolving sphere has its applications found in electrolysis management, polymer deposition, medication transfer, cooling of spinning machinery segments, spin-stabilized missiles and other industrial and technical applications.

Originality/value

The originality of the study is to investigate the effect of shape factor on the flow of electrically conducting hybrid nanofluid past a rotating sphere with heat generation/absorption and magnetic field. The results are validated and provide extremely positive balance with the recognised articles. The results of the study provide many appealing applications that merit further study of the problem.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 33 no. 11
Type: Research Article
ISSN: 0961-5539

Keywords

Access Restricted. View access options
Article
Publication date: 2 August 2024

Sweta, RamReddy Chetteti and Pranitha Janapatla

This study aims to optimize heat transfer efficiency and minimize friction factor and entropy generation in hybrid nanofluid flows through porous media. By incorporating factors…

77

Abstract

Purpose

This study aims to optimize heat transfer efficiency and minimize friction factor and entropy generation in hybrid nanofluid flows through porous media. By incorporating factors such as melting effect, buoyancy, viscous dissipation and no-slip velocity on a stretchable surface, the aim is to enhance overall performance. Additionally, sensitivity analysis using response surface methodology is used to evaluate the influence of key parameters on response functions.

Design/methodology/approach

After deriving suitable Lie-group transformations, the modeled equations are solved numerically using the “spectral local linearization method.” This approach is validated through rigorous numerical comparisons and error estimations, demonstrating strong alignment with prior studies.

Findings

The findings reveal that higher Darcy numbers and melting parameters are associated with decreased entropy (35.86% and 35.93%, respectively) and shear stress, increased heat transmission (16.4% and 30.41%, respectively) in hybrid nanofluids. Moreover, response surface methodology uses key factors, concerning the Nusselt number and shear stress as response variables in a quadratic model. Notably, the model exhibits exceptional accuracy with $R^2$ values of 99.99% for the Nusselt number and 100.00% for skin friction. Additionally, optimization results demonstrate a notable sensitivity to the key parameters.

Research limitations/implications

Lubrication is a vital method to minimize friction and wear in the automobile sector, contributing significantly to energy efficiency, environmental conservation and carbon reduction. The incorporation of nickel and manganese zinc ferrites into SAE 20 W-40 motor oil lubricants, as defined by the Society of Automotive Engineers, significantly improves their performance, particularly in terms of tribological attributes.

Originality/value

This work stands out for its focus on applications such as hybrid electromagnetic fuel cells and nano-magnetic material processing. While these applications are gaining interest, there is still a research gap regarding the effects of melting on heat transfer in a NiZnFe_2O_4-MnZnFe_2O_4/20W40 motor oil hybrid nanofluid over a stretchable surface, necessitating a thorough investigation that includes both numerical simulations and statistical analysis.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 34 no. 9
Type: Research Article
ISSN: 0961-5539

Keywords

Access Restricted. View access options
Article
Publication date: 12 November 2024

Soroosh Shojaee, Mohammad Vahabi, Saeed Dinarvand, Amirhossein Hamedi, Arash Mirabdolah Lavasani and Zahra Moinfar

This paper aims to study numerically the non-Newtonian solution of carboxymethyl cellulose in water along with copper oxide nanoparticles, which flow turbulently through twisted…

22

Abstract

Purpose

This paper aims to study numerically the non-Newtonian solution of carboxymethyl cellulose in water along with copper oxide nanoparticles, which flow turbulently through twisted smooth and finned tubes.

Design/methodology/approach

The twisted-tape inserts of rectangular and triangular sections are investigated under constant wall heat flux and the nanoparticle concentration varies between 0% and 1.5%. Computational fluid dynamics simulation is first validated by experimental information from two test cases, showing that the numerical results are in good agreement with previous studies. Here, the impact of nanoparticle concentration, tube twist and fins shape on the heat transfer and pressure loss of the system is measured. It is accomplished using longitudinal rectangular and triangular fins in a wide range of prominent parameters.

Findings

The results show that first, both the Nusselt number and friction factor increase with the rise in the concentration of nanoparticles and twist of the tube. Second, the trend is repeated by adding fins, but it is more intense in the triangular cases. The tube twist increases the Nusselt number up to 9%, 20% and 46% corresponding to smooth tube, rectangular and triangular fins, respectively. The most twisted tube with triangular fins and the highest value of concentration acquires the largest performance evaluation criterion at 1.3, 30% more efficient than the plain tube with 0% nanoparticle concentration.

Originality/value

This study explores an innovative approach to enhancing heat transfer in a non-Newtonian nanofluid flowing through an oval tube. The use of twisted-tape inserts with rectangular and triangular sections in this specific configuration represents a novel method to improve fluid flow characteristics and heat transfer efficiency. This study stands out for its originality in combining non-Newtonian fluid dynamics, nanofluid properties and geometric considerations to optimize heat transfer performance. The results of this work can be dramatically considered in advanced heat exchange applications.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 34 no. 12
Type: Research Article
ISSN: 0961-5539

Keywords

1 – 10 of 118
Per page
102050