Search results

The paper's aim is to synthesise ultraviolet (UV) curable polyurethane acrylate based on polyester polyol and to study change in its mechanical, chemical, optical and weather resistance properties with varying amount of nanosilica. It also seeks to determine its optimum loading levels for property maximisation.

New UV curable polyurethane acrylate has been synthesised using polyester polyol, blend of isophorone diisocyanate and toluene diisocyanate and hydroxyl ethyl acrylate. This resin was incorporated with nanosilica (1‐3 per cent) on the basis of total solids. The newly synthesised material was characterised by fourier transform infrared spectroscopy, gel permeation chromatography, X‐ray diffraction and scanning electron microscopy. The mechanical, chemical and optical properties of the coating films were studied and compared.

The hardness, tensile strength and abrasion resistance show significant enhancement with increasing amount of nanosilica. It is also found that UV cured polyurethane acrylate nanocoating exhibited improved weather resistance. The optimum concentration of nanosilica for better performance is found to be 3 per cent of total solids. The improvement is the result of inherent nature of nanosilica.

Nanosilica used in present context is having 10 nm mean diameter and near about 600 m²/g surface area. Nanosilica having different particle size, surface area and surface modification can be used to improve more specific properties.

Addition of nanosilica particles to polyurethane acrylate coating is a simple and inexpensive method resulting in phenomenal increase in properties.

The new organic‐inorganic hybrid nanocoating with improved weather resistance was synthesised. These coatings could find applications in demanding fields such as automotive topcoats.

The purpose of this paper is to prepare heat insulating exterior emulsion coating and to study its heat insulating property along with mechanical, chemical and weathering resistance properties with varying amount of hollow glass microspheres and cenospheres.

For heat insulating effect, various compositions were made by incorporating different proportions of hollow glass microspheres (HGM) and cenospheres (C). The mechanical, chemical, morphological and optical properties of the coating films were studied and compared.

Addition of hollow glass microspheres and cenospheres enhanced heat insulating property of the coating, hardness, tensile strength and wet scrub resistance. It was evaluated that optimum loading for both cenospheres and hollow glass microspheres was 10 wt.% and both the systems showed good mechanical, chemical resistance and weathering properties.

Addition of hollow glass microspheres and cenospheres to acrylic emulsion coating is a simple and inexpensive method.

The new heat insulating coatings with good thermal insulation properties and improved weather resistance were prepared. These coatings could find applications in demanding fields such as exterior wall coatings and roof coatings.

The aim of this paper is to conduct a real time evaluation of polypyrrole as an anti‐corrosive pigment in epoxy polyamide coating.

This study deals with synthesis of polypyrrole (PPy) by chemical oxidative polymerisation in laboratory conditions. The synthesised PPy was characterised by employing FT‐IR, XRD, SEM and EDX analysis. Epoxy film of bisphenol type hardened with polyamide based curing agent was used as the binder. PPy was used as anti‐corrosive pigment in concentrations varying from 0 to 5 wt% in the coating. In addition to anti‐corrosive property, mechanical, chemical and weathering properties of the coating containing PPy were studied and compared with epoxy polyamide coating without PPy.

The result obtained through various tests showed that the coating with 1 and 2% PPy exhibited excellent weathering resistance, mechanical properties and improved chemical resistance.

The anti‐corrosion property of the coating can be tested by means of atmospheric exposure such as Florida test or by means of electrochemical impedance spectroscopy.

The results find application in anti‐corrosive paints for industrial application.

This research paper presents the results of anti‐corrosion behaviour of PPy in epoxy‐polyamide coating. Based on this result, a highly effective anti‐corrosive coating can be formulated by addition of small percentage of PPy in combination with other conventional pigments, thereby enhancing corrosion protection.

The purpose of this paper is to formulate two component polyurethane coatings based on acrylic polyol, to study the effects of variable nanosilica loadings in these coatings on different morphological, optical, mechanical, corrosion resistance and weather resistance properties and to study the intercalation of acrylic polyol molecules into nanosilica crystals by XRD technique.

Two component polyurethane coatings were synthesised using acrylic polyol and isocyanate HDI. The nanosilica was incorporated in polyurethane formulation at the weight ratios of 1%, 3% and 5% based on total weight of polyol and isocyanate. The performance of nanocoatings was compared for variable loads of nanosilica for different properties such as morphological, optical, mechanical, corrosion resistance, weather resistance and were studied for intercalation of acrylic polyol into nanosilica crystals by XRD technique.

Improvement in the properties of polyurethane coatings is achieved with the incorporation of nanosilica. The improvement is the result of inherently high properties of inorganic nanosilica. Tensile strength, scratch hardness, abrasion resistance, corrosion and weathering resistance show significant improvement in performance with the incorporation of nanosilica. Properties are found to deteriorate beyond a certain loading of nanosilica; hence it is important to optimise loading level. The optimal range for high performance was found to be in the range of 1% to 3%. The improvement was a result of synergistic behaviour and good interfacial interaction between polyurethane and nanosilica at optimal levels.

The method used for incorporation of nanosilica into polyurethane was direct incorporation method. The other method of incorporation, i.e. in situ addition and its effect on properties can also be studied.

With the addition of optimal loading level of nanosilica to polyurethane coatings, properties can be enhanced up to the mark. The addition is relatively easy and cost effective.

The paper proves the significance of incorporation of nanosilica on original properties of polyurethane coatings and widens the area of applications of two component polyurethane coatings from acrylic polyol by strengthening them in their properties. The coatings can be applicable in high performance topcoats especially for automotive topcoats.

The purpose of this work was to develop a new trispiperazido phosphate-based reactive diluent (diphosphate-piperazine hydroxyl acrylate [DPHA]) and used as a flame retardant with an epoxy acrylate (EA) in ultraviolet (UV)-curable wood coating.

The concentration of reactive diluent was varied from 0% to 20% in the UV-curable formulation with constant photoinitiator concentration. The effect of DPHA concentration on film properties was studied by differential scanning calorimetry and thermogravimetric analysis, gel content, water absorption and limiting oxygen index.

The results showed that the viscosity of the prepared formulation decreased by increasing reactive diluent (DPHA) concentration which leads to improving the coating efficiency. A high concentration of reactive diluent (DPHA) of the cured films shows good resistance against stain, mechanical and thermal properties, which results in an increased glass transition temperature (T_g) and cross-linking density of the films.

The new trispiperazido phosphate-based reactive diluent was used in wood coating formulation, which resulted in excellent flame-retardant properties with higher cross-linked density with good stain resistance. This material can provide a wide range of application for coating industries to produce a glossy finish.

This study aims to construct a double layer heat insulation coating based on hollow glass microspheres (HGMs) and to investigate the effect of particle size on barrier property and heat insulation performance.

The waterborne double layer coating was composed of an anticorrosive epoxy ester primer and an HGM-containing silicone acrylic topcoat. With varied HGM sizes (20 μm, 40 μm, 60 μm and a 1:3 w/w mixture of 20 and 60 μm particles), the coating was immersed in 3.5 wt% NaCl solution for 28 days and was then subjected to a salt spray test for 450 h. The barrier properties of the coating were evaluated through electrochemical impedance spectroscopy. Heat insulation performance was examined using a self-made device.

The addition of HGMs decreased the barrier properties of the coating by creating particle/resin interfaces for water penetration. In the HGMs-containing coatings, the use of larger HGMs showed relatively good barrier properties because of the lower particle density. The coating with smaller particles yielded a higher heat insulating capacity as indicated by lower equilibrium temperatures.

Future work will be focused on improving the barrier properties of the coating. Field exposure tests should also be performed to assess the long-term performance of the coating.

The mechanical properties of the coatings in this study also implied that HGMs can be used to develop scratch-resistant and impact-resistant coatings. Other potential applications for further studies include the uses of HGMs for coatings with improved fire retardancy and electromagnetic interference shielding.

A double layer coating was developed to provide balanced performance on both anticorrosion and heat insulation. The effects of HGM size were particularly highlighted.

The paper aims to discuss the evaluation of anti-corrosive efficiency of conducting polymer, polypyrrole in water borne epoxy-polyamine coatings.

Polypyrrole (PPy) is synthesised by chemical oxidative polymerisation. The synthesised PPy is characterised by employing FT-IR, XRD, SEM and EDX analysis. The coatings are formulated using water borne epoxy cross-linked with aliphatic polyamine adduct and the effect of PPy on corrosion prevention is studied. PPy was used as anti-corrosive pigment in concentration varying from 1 to 5 wt.%. In addition to anti-corrosive property; mechanical properties, chemical resistance and weathering properties of the coatings containing PPy are studied, thereby obtaining a wholesome data about the quality and performance of these coatings.

The result obtained through various tests showed that the coating with 1 and 2% PPy exhibited excellent weathering resistance, mechanical properties and improved chemical resistance. Higher percentage loading of PPy (beyond 3 per cent) proves to be disastrous, as extended percolation networks are formed which results in rapid intense corrosion leading to fast coating breakdown.

The anti-corrosion property of the coating can be tested by means of atmospheric exposure such as Florida test which produces a real time evaluation of the anti-corrosive nature of the coating at natural condition rather than accelerated weathering, thereby providing more reliable performance data for intended application purpose.

The results find application in anti-corrosive/performance paints for industrial application.

This research paper presents the results of anti-corrosion behaviour of PPy in water borne epoxy-polyamide coating. Based on this result, a highly effective anti-corrosive coating can be formulated by the addition of small percentage of PPy in combination with other conventional pigments, thereby enhancing corrosion protection. But care must be taken so as to avoid formation of extended percolation network of PPy which leads to rapid coating breakdown.