Search results

1 – 3 of 3
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 13 April 2010

Olli Nousiainen, Timo Urhonen, Tero Kangasvieri, Risto Rautioaho and Jouko Vähäkangas

The purpose of this paper is to investigate the feasibility of using land grid array (LGA) solder joints as a second-level interconnection option in low-temperature co-fired…

385

Abstract

Purpose

The purpose of this paper is to investigate the feasibility of using land grid array (LGA) solder joints as a second-level interconnection option in low-temperature co-fired ceramic (LTCC)/printed wiring board (PWB) assemblies for telecommunication applications. The characteristic behaviour of two commercial lead-free solder materials (Sn4Ag0.5Cu and Sn3Ag0.5Cu0.5In0.05Ni) in reflow processes and thermal cycling tests are also evaluated.

Design/methodology/approach

The effect of the reflow temperature profile on voiding in two lead-free solders in LTCC/PWB assemblies was investigated using X-ray and scanning electron microscopy (SEM) investigations. The test assemblies were fabricated and exposed to a temperature cycling test (TCT) in a 0-100°C or −40 to 125°C temperature range. Organic PWB material with a low coefficient of thermal expansion (CTE) was primarily used. In addition, to compare LGA assemblies with low and high global thermal mismatches, an LTCC module/FR-4 assembly was also fabricated and exposed to a TCT in a 0-100°C temperature range. The characteristic lifetime of the test assemblies was determined using DC resistance measurements. The failure mechanisms of the interconnections were verified using scanning acoustic microscopy, SEM and finite element (FE)-SEM investigations.

Findings

This work showed that the solderability of AgPt-metallized LTCC modules was poor, resulting in excessive voiding. This problem was avoided by using pre-tinned modules. In the test assemblies, the Sn4Ag0.5Cu joints had a lower void content and a higher characteristic lifetime compared with the Sn3Ag0.5Cu0.5In0.05Ni joints. Furthermore, it was observed that the Sn3Ag0.5Cu0.5In0.05Ni joints were more prone to fail along the interface between the Ag3Sn layer and the solder matrix than were the Sn4Ag0.5Cu joints. It was assumed that the observed difference in the primary failure mechanisms resulted in the decreased lifetime duration of the SnAgCu-InNi/Arlon in both temperature cycling conditions.

Originality/value

The results proved that the solderability of both solders in AgPt-metallized modules in a typical surface mount technology process was poor; however, the solderability of the test modules can be notably enhanced with pre-tinned pads. This work also demonstrated the effect of the metallization/solder pair on the failure mechanisms and failure rate in LTCC/PWB assemblies with LGA joints; the work also proved in the TCT, over a temperature range of 0-100°C, that using the present LGA joints in LTCC/PWB assemblies with a high global thermal mismatch did not increase the lifetime duration of the joints to the preferred level (3,000 cycles), whereas the performance of these joints was adequate in assemblies with a low global thermal mismatch. Moreover, the results indicated that using the LGA joint configuration enhanced the reliability of the LTCC/PWB assemblies compared with similar assemblies with collapsible ball grid array solder spheres.

Details

Soldering & Surface Mount Technology, vol. 22 no. 2
Type: Research Article
ISSN: 0954-0911

Keywords

Access Restricted. View access options
Article
Publication date: 27 May 2014

Jussi Putaala, Olli Salmela, Olli Nousiainen, Tero Kangasvieri, Jouko Vähäkangas, Antti Uusimäki and Jyrki Lappalainen

The purpose of this paper is to describe the behavior of different lead-free solders (95.5Sn3.8Ag0.7Cu, i.e. SAC387 and Sn7In4.1Ag0.5Cu, i.e. SAC-In) in thermomechanically loaded…

195

Abstract

Purpose

The purpose of this paper is to describe the behavior of different lead-free solders (95.5Sn3.8Ag0.7Cu, i.e. SAC387 and Sn7In4.1Ag0.5Cu, i.e. SAC-In) in thermomechanically loaded non-collapsible ball grid array (BGA) joints of a low-temperature co-fired ceramic (LTCC) module. The validity of a modified Engelmaier’s model was tested to verify its capability to predict the characteristic lifetime of an LTCC module assembly implementable in field applications.

Design/methodology/approach

Five printed wiring board (PWB) assemblies, each carrying eight LTCC modules, were fabricated and exposed to a temperature cycling test over a −40 to 125°C temperature range to determine the characteristic lifetimes of interconnections in the LTCC module/PWB assemblies. The failure mechanisms of the test assemblies were verified using scanning acoustic microscopy, scanning electron microscopy (SEM) and field emission SEM investigation. A stress-dependent Engelmaier’s model, adjusted for plastic-core solder ball (PCSB) BGA structures, was used to predict the characteristic lifetimes of the assemblies.

Findings

Depending on the joint configuration, characteristic lifetimes of up to 1,920 cycles were achieved in the thermal cycling testing. The results showed that intergranular (creep) failures occurred primarily only in the joints containing Sn7In4.1Ag0.5Cu solder. Other primary failure mechanisms (mixed transgranular/intergranular, separation of the intermetallic compound/solder interface and cracking in the interface between the ceramic and metallization) were observed in the other joint configurations. The modified Engelmaier’s model was found to predict the lifetime of interconnections with good accuracy. The results confirmed the superiority of SAC-In solder over SAC in terms of reliability, and also proved that an air cavity structure of the module, which enhances its radio frequency (RF) performance, did not degrade the reliability of the second-level interconnections of the test assemblies.

Originality/value

This paper shows the superiority of SAC-In solder over SAC387 solder in terms of reliability and verifies the applicability of the modified Engelmaier’s model as an accurate lifetime prediction method for PCSB BGA structures for the presented LTCC packages for RF/microwave telecommunication applications.

Details

Soldering & Surface Mount Technology, vol. 26 no. 3
Type: Research Article
ISSN: 0954-0911

Keywords

Access Restricted. View access options
Article
Publication date: 3 July 2007

Olli Nousiainen, Tero Kangasvieri, Kari Rönkä, Risto Rautioaho and Jouko Vähäkangas

This paper aims to investigate the metallurgical reactions between two commercial AgPt thick films used as a solder land on a low temperature co‐fired ceramic (LTCC) module and…

333

Abstract

Purpose

This paper aims to investigate the metallurgical reactions between two commercial AgPt thick films used as a solder land on a low temperature co‐fired ceramic (LTCC) module and solder materials (SnAgCu, SnInAgCu, and SnPbAg) in typical reflow conditions and to clarify the effect of excessive intermetallic compound (IMC) formation on the reliability of LTCC/printed wiring boards (PWB) assemblies.

Design/methodology/approach

Metallurgical reactions between liquid solders and AgPt metallizations of LTCC modules were investigated by increasing the number of reflow cycles with different peak temperatures. The microstructures of AgPt metallization/solder interfaces were analyzed using SEM/EDS investigation. In addition, a test LTCC module/PWB assembly with an excess IMC layer within the joints was fabricated and exposed to a temperature cycling test in a −40 to 125°C temperature range. The characteristic lifetime of the test assembly was determined using DC resistance measurements. The failure mechanism of the test assembly was verified using scanning acoustic microscopy and SEM investigation.

Findings

The results showed that the higher peak reflow temperature of common lead‐free solders had a significant effect on the consumption of the original AgPt metallization of LTCC modules. The results also suggested that the excess porosity of the metallization accelerated the degradation of the metallization layer. Finally, the impact of these adverse metallurgical effects on the actual failure mechanism in an LTCC/PWB assembly was demonstrated.

Originality/value

This paper proves how essential it is to know the actual LTCC metallization/solder interactions that occur during reflow soldering and to recognize their effect on solder joint reliability in LTCC module/PWB assemblies. Moreover, the adverse effect of using lead‐free solders on the degradation of Ag‐based metallizations and, consequently, on board level reliability is demonstrated. Finally, practical guidelines for selecting materials for second‐level solder interconnections of LTCC module are given.

Details

Soldering & Surface Mount Technology, vol. 19 no. 3
Type: Research Article
ISSN: 0954-0911

Keywords

1 – 3 of 3
Per page
102050