Search results

The purpose of this paper is to draw attention to the link between underdeveloped and ill-informed sizing practices, fit dissatisfaction and the creation of textiles waste. The literature review identifies: issues that limit the effective development and application of sizing systems, the link between the complexities of consumer fit expectations, body image and self-esteem and maps the link between fit dissatisfaction and the creation of textiles waste.

Data analysis draws from a wider study designed to investigate women’s experiences of dress fit and body image. In total, 20 women aged 18-45 years were audio recorded while they tried on a number of mass-produced dresses, and were asked to select one dress, which they could keep.

All the dresses were selected except one style, which failed to satisfy any of the women’s fit requirements. The findings clearly demonstrate why this dress was considered to be unsatisfactory as well as the subsequent link between poor fit and body dissatisfaction.

Findings support the theory that women identify with their clothes’ size and when this link is disrupted it causes discomfort and body dissatisfaction, which, in turn, contributed to rejection of the garment increasing the potential for the creation of waste.

This study is the first to link unsatisfactory fashion sizing practice with the production of textiles waste. The process of capturing women’s interactions with high street fashion dresses whilst trying them on enabled a detailed analysis that contributes new evidence to the debate around sizing practice, poor fit and its impact on body image and self-esteem.

This paper reviews the literature on environmentally sustainable practices in textile, apparel and fashion (TAF) industries to allow the mapping of practices across various manufacturing processes and the development of a conceptual framework to guide investigation of the extent of sustainable practices in TAF industries from an environmental perspective.

A systematic literature review was undertaken, consisting of bibliometric and content analysis of 91 articles published in peer-reviewed journals over a 10-year period.

The inclusion of sustainable practices from all manufacturing stages in this review illustrates the diversity and complexities of environmental practices in TAF contexts. However, there is less research in developing country contexts, where most TAF production takes place and a paucity of research in upstream stages of garment washing and dyeing, and the manufacture of trims, accessories and packaging.

The focus is on environmental sustainability and upstream manufacturing processes. The review includes literature in the form of academic journal articles from selected databases during the period January 2010–June 2020.

This review provides academics with a unified depiction of environmentally sustainable practices to stimulate further scholarly research and provides guidance for managers to develop firm sustainability competency by summarising best practices at different manufacturing stages

This review comprehensively maps the academic literature on environmentally sustainable practices in TAF industries from an upstream manufacturing operations context. It highlights the contribution of scholarly study to the knowledge base on environmentally sustainable practices in TAF industries.

The purpose of this paper is to provide a theoretical model for considering ease numerically in the clothing pattern. Classifying the pattern as a geometric Cartesian coordinate system, this model proposes the need to quantify the partly coincident variables of ease, which will enable greater control over garment fit and function, using traditional or CAD/CAM methods.

The principles of pattern/garment dimensions are considered with support from analysis of literature and contributing factors to the variables of ease are categorised. These principles support a proposed theoretical model for considering pattern/garment dimensions, in the numeric format that they exist within the context of pattern construction.

Pattern construction occurs in a 2D Cartesian coordinate system, guided by body dimensions and ease. This can be modelled in the form of an algorithm relating to the placement of cardinal points defining the pattern outline. Recognition of the numerical nature of the pattern, suggests the need to quantify the coincident variables of ease, to achieve greater control over garment fit and function.

Few sources exist enabling the recognition of ease requirements in the pattern/garment and when guidance on ease is presented, there is little rationale as to how it has been established, or what contributes to its definition.

The paper shows how current methods of pattern construction can be modelled more effectively, recognising the geometric nature on which they are based. Modelling these relationships highlights where quantification can be provided, by existing knowledge or future research.

The comfort and fit of clothes are affected by fabric properties, dressed ease and environmental conditions, in which dressed ease is influenced by the interaction among complex shapes of human body, style design and fabric mechanical properties.

In this study, the dressed ease distribution at waist section, which is related to body surface convex angle, was investigated using 3D scanning. A series of surface convex angles on bust and back were formed after adjusting the mannequin. The mannequin was scanned by TC2 separately in garments with eight different ease allowances. Then the dressed ease distributions at waist under different convex angles of body surface have been acquired by calculating the distance between waist points and dressed surfaces along normal directions.

The results showed that the body surface convex angle was weakly related to the dressed ease when the garments’ bust ease allowance was below 4 cm. When the garments’ bust ease allowance was within 6–12 cm, the body convex angle had a great impact on the dressed waist ease distribution in the condition of 26º–33º bust convex angle and 13.96º–17.96º back slope angle. For slack garments with more than 16 cm ease allowance, the dressed waist ease distribution did not relate to the bust convex angle, while it strongly related to the bust convex angle between 13.96º and 17.96º. The regression model was statistically significant between the dressed ease value and the body surface convex angle.

According to the dressed waist ease distribution of different body surface convex angles, this paper gives an application of pattern modification in order to optimize the waist fit. The results can provide guidance for the optimization of different body shapes. At the same time, the application of gap data to 3D virtual fitting can greatly improve the authenticity of virtual simulation effect.

The purpose of this study is to examine the role of videoconferencing technologies for mediating and transforming emotional experiences in virtual context.

Drawing on empirical data of video conferencing experiences, this study identifies different constitutive relations with technology through which actors cope with actual or potential anxieties in virtual meetings. It draws on the phenomenological-existential tradition (Sartre and Merleau-Ponty) and on an interpretive phenomenological analysis (IPA) to conceptualize and illustrate the role of affective affordances in virtual settings.

The study identifies four different body–technology–other relations that provide different action possibilities, both disclosing and concealing, for navigating emotional experiences in virtual encounters of mutual gazing. These findings offer insights into the anatomy of virtual emotions and provide explanations on the nature of Zoom fatigue (interactive exhaustion) and heightened feelings of self-consciousness resulting from video conferencing interactions.

This paper builds on and extends current scholarship on technological affordances, as well as emotions, to suggest that technologies also afford different tactics for navigating emotional experiences. Thus, this paper proposes the notion of affective affordance that can expand current information system (IS) and organization studies (OS) scholarship in important ways. The focus is on videoconference technologies and meetings that have received little research attention and even less so from a perspective on emotions. Importantly, the paper offers nuanced insights that can advance current research discourse on the relationships between technology, human body and emotions.

This study matches destination brand components with motives and identifies those components that are most important for the consumer during various stages of the decision process. This study also aims to classify various functional and symbolic brand components. The findings take the customers' point‐of‐view in identifying those descriptors that affect consumer choice preference and create destination loyalty.

The research is exploratory. Through a detailed literature review, destination brand components are identified, simplified and then classified as symbolic or functional. They are also classified by motive. The review is followed by a quantitative study that uses open‐ended questions to find the relationship between destination brand components and the stage of decision making. This study also presents a conceptual model with taxonomy of brand components.

Functional brand components seem to play a major role in a consumer's description of place brands during the various decision making stages. This finding highlights the importance of stressing functional components in the destination's branding strategy.

This study is the first of its type and can serve as a platform for future research, practically helping destinations create more effective communication.

Travel and tourism is the second largest global industry with daily international revenues of approximately US$2 billion, and investments of 12 percent of world GDP. Though this is a highly competitive industry, there is a paucity of academic research on destination branding. This paper aims to present a branding framework for designing successful destination strategies. This exploratory study seeks to determine key factors that affect the strategic branding of destinations.

Similar fields like place marketing, destination marketing, services, product and corporate branding were reviewed along with destination case studies. Based on this review and its extrapolation to the “destination context”, a framework for strategic branding of destinations was formulated.

Successful strategic branding of destinations is dependent on several inter‐related components, which are discussed. The paper highlights key issues in destination branding and provides a platform for future research.

The value of the paper is high as it provides a practical framework for governing bodies to consider when investing time, money and effort when creating a global destination.