Search results

This study intends to explore the configuration that affects the active degree of written questions in the Macau Legislative Assembly.

This study takes the members elected by the sixth Legislative Assembly of Macau as samples and uses the fuzzy set qualitative comparative analysis method. Five conditional factors are discussed, including multiple concurrent factors and complex causal mechanisms, which lead to the difference in the active degree of written questions.

The main conclusions are as follows: (1) Not Serving in the government is a necessary condition for a high active degree of the written question, and (2) The driving mechanism of a high active degree of written question can be divided into two paths. Among them, direct election into the Legislative Assembly is the crucial factor.

Traditional research mainly uses quantitative research methods. This study uses qualitative comparative analysis (QCA), which is a hybrid method designed to bridge the qualitative (case-oriented) and quantitative (variable-oriented) research gap.

The purpose of this paper is to solve the azimuth sensitivity of a high-resolution range profile (HRRP), which is one of the biggest obstacles faced by a radar automatic target recognition (RATR) system.

Aimed at addressing the shortcomings of the equal angular-sector segmentation based on the scatterer model, an adaptive angular-sector segmentation is proposed on the basis of grey incidence analysis (GIA).

The main conclusions reached are as follows. First, the adaptive angular-sector segmentation in terms of GIA is suitable for RATR based on the HRRP; and, second, the adaptive angular-sector segmentation based on the type-B degree of grey incidence model is better than the Deng-Si degree of grey incidence model and the degree of grey slope incidence model.

The outcome obtained in this paper can be selected for the RATR application.

This paper has been built on the basis of previous research achievements, and a new RATR method of adaptive angular-sector segmentation is presented based on the GIA.

The paper aimed to summarize innovative rules of Chinese manufacturing enterprises, and put forward some insights in optimal allocation of innovation resources and enhancing the capability of indigenous innovation, so as to overcome the innovation dilemma.

Having diagnosed the current research of innovation flows, the authors defined the concept and stated characteristics of mainstream and new‐stream innovation. Innovation life cycle theory and technology trajectory theory were used to map two evolution patterns of mainstream and new‐stream innovation. It took weeks to stay in firms to obtain original data and interview managers, engineers, and mechanists. From the case study the authors proposed the improvement projects and opportunities for firms to overcome the “innovation dilemma”.

In the indigenous innovation process, enterprises should breed new‐stream innovation as they strengthen the mainstream innovation, view the new‐stream technology as the innovation direction, and fulfill the constant innovation in the convergent innovation and replace evolution process. Meanwhile, enterprises should take precautions both to expand and develop, and fulfill technology transition and innovation upgrade through convergent innovation. Furthermore, firms' convergent innovation, which will finally achieve the “projects‐talents‐products‐markets” collaborative innovation, should be clear about target market and project‐oriented, take the product as the carrier, and be committed to cultivate creative talents and innovative teams.

This paper enriches the existing theory on indigenous innovation by introducing the new concept of mainstream and new‐stream innovation. The findings would help firms to jump out from the innovation morass.

This study aims to explore the feasibility of adding Si₃N₄ nanoparticles to Sn58Bi and provides a theoretical basis for designing and applying new lead-free solder materials for the electronic packaging industry.

In this paper, Sn58Bi-xSi₃N₄ (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0 Wt.%) was prepared for bonding Cu substrate, and the changes in thermal properties, wettability, microstructure, interfacial intermetallic compound and mechanical properties of the composite solder were systematically studied.

The experiment results demonstrate that including Si₃N₄ nanoparticles does not significantly impact the melting point of Sn58Bi solder, and the undercooling degree of solder only fluctuates slightly. The molten solder spreading area reached a maximum of 96.17 mm², raised by 19.41% relative to those without Si₃N₄, and the wetting angle was the smallest at 0.6 Wt.% of Si₃N₄, with a minimum value of 8.35°. When the Si₃N₄ nanoparticles reach 0.6 Wt.%, the solder joint microstructure is significantly refined. Appropriately adding Si₃N₄ nanoparticles will slightly increase the solder alloy hardness. When the concentration of Si₃N₄ reaches 0.6 Wt.%, the joints shear strength reached 45.30 MPa, representing a 49.85% increase compared to those without additives. A thorough examination indicates that legitimately incorporating Si₃N₄ nanoparticles into Sn58Bi solder can enhance its synthetical performance, and 0.6 Wt.% is the best addition amount in our test setting.

In this paper, Si₃N₄ nanoparticles were incorporated into Sn58Bi solder, and the effects of different contents of Si₃N₄ nanoparticles on Sn58Bi solder were investigated from various aspects.

This paper aims to explore the adsorption kinetics of syringin from Syringa oblata Lindl. leaves on macroporous resin and develop an efficient, simple and recyclable technology for the separation and purification of syringin.

Static adsorption and desorption properties of six resins were tested to select a suitable resin for the purification of syringin. Langmuir and Freundlich isotherm models were used to estimate the adsorption behavior of syringin on AB-8 resin. Breakthrough point and eluent volume were determined by dynamic adsorption and desorption tests. High-performance liquid chromatography-electrospray ionization-mass spectrometry was applied to identify the syringin in the purified product [syringin product (SP)]. Antioxidant and antibacterial activities of SP in vitro were evaluated by free radical scavenging ability and biofilm formation inhibitory tests.

AB-8 exhibited the most suitable adsorption and desorption capacity. Adsorption isotherm parameters indicated favorable adsorption between AB-8 and syringin. The optimal results were as follows: for adsorption, the sample concentration was 1.85 mg/mL, the sample volume was 3.5 bed volume (BV), the flow rate was 0.5 mL/min; for desorption, the ethanol concentration was 70%, the elution volume was 2.5 BV, the elution velocity was 1.0 mL/min. SP with 80.28% syringin displayed the potent antioxidant activities and inhibitory effects on biofilm formation of Streptococcus suis.

To the best of authors’ knowledge, there are no reports on purifying syringin from Syringa oblata Lindl. leaves using macroporous resins. This paper may also provide a theoretical reference for the purification of other phenylpropanoid glucosides.

Drawing on the adapted unified theory of acceptance and use of technology (UTAUT2) framework in the bottom of pyramid (BoP) context, this paper examines the number of causal recipes that foster m-health adoption in a developing country (Bangladesh). This paper aims to propose an extended UTAUT2 model along with identifying the necessary and sufficient factors affecting the m-health adoption intention in the BoP market.

The research model was empirically tested, combining two approaches: structural equation modelling (SEM) and fuzzy-set qualitative comparative analysis (fsQCA). Data were collected from 221 housemaids and female security guards who earn around US$6 per day.

The SEM results revealed that while performance expectancy (PE), effort expectancy (EE), social influence (SI), facilitating conditions, perceived cost (PC) and technology anxiety (TA) significantly influence the behavioural intention of BoP markets, hedonic motivation is the non-significant predictor. The fsQCA revealed that the two necessary conditions, PC and SI, can be combined with TA to increase the possibility of the success of m-health adoption in the BoP market.

For practitioners concerned with fostering the m-health adoption intention in BoP markets, the present study, which points out equifinality, recommends integrating the PC and SI in several combinations with PE, EE and TA.

To the best of the authors’ knowledge, no previous studies using the UTAUT2 theory examined the m-health services in the BoP market. This study contributes empirical data to the predominantly theoretical literature by offering a deeper understanding of the inclusion of TA and PC in several combinations with other UTUAT2 factors as predictors for explaining the m-health adoption intention of BoP markets.

This paper aims to improve the tribological properties of aluminum alloys and reduce their wear rate.

Carbon is placed in the model at room temperature, pour 680°C of molten aluminum into the pressure chamber, and then pressed it into the mold containing carbon felt through a die casting machine, and waited for it to cool, which used an injection pressure of 52.8 MPa and held the same pressure for 15 s.

The result indicated that the mechanical properties of matrix and composite are similar, and the compressive strength of the composite is only 95% of the matrix alloy. However, the composite showed a low friction coefficient, the friction coefficient of Gr/Al composite is only 0.15, which just is two-third than that of the matrix alloy. Similarly, the wear rate of the composite is less than 4% of the matrix. In addition, the composite can avoid severe wear before 200°C, but the matrix alloy only 100°C.

This material has excellent friction properties and is able to maintain this excellent performance at high temperatures.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0454/

While the significance of organizational resources and capabilities is widely discussed, little is known about their interrelationships as well as benefits for firms that are involved in coopetitive relationships. Against this backdrop, the purpose of this paper is to investigate the performance effects of entrepreneurial orientation, strategic intent and potential absorptive capacity as well as their complementarity effects on operational and innovation performance for firms involved in horizontal coopetitive relationships.

Drawing upon the resource-based-view, dynamic capabilities and the relational view theories, this study forwards numerous hypotheses between the constructs of interest. The proposed hypotheses are tested utilizing survey data collected from 313 horizontal coopetitive relationships.

The results clearly suggest that entrepreneurial orientation, strategic intent and potential absorptive capacity could positively impact innovation and operational performance outcomes independently. In addition, the authors also find strategic intent and potential absorptive capacity to have differential moderating effects on the relationships between entrepreneurial orientation and the performance outcomes.

The findings suggest that although strategic intent and potential absorptive capacity could lead to performance benefits independently, when it comes to coopetitive relationships, the use of both these capabilities may not substantially increase the positive impact of entrepreneurial orientation on performance outcomes. Specifically, given that these capabilities could intensify competitiveness as well as hostility between partners, they seem to affect the firm's performance differently.