Search results

This paper describes a research and development effort on a GIS‐based pipeline planning system (GIS‐based PPS). Research was first conducted to identify the aspects of pipeline planning and pipeline network design that could benefit from a computer assisted approach, and the recent advancements in information technology. This paper describes a cohesive computer environment that integrates the hydraulic analysis and geographic information processing with a graphic user interface (GUI), in order to improve the effectiveness of pipeline design functions. An interactive system prototype was implemented and is currently being applied in real‐world pipeline network planning and design for municipal and industrial water conveyance.

The brief announcement that the Government had accepted that there should be regulations on open date marking of food, to come into effect in 1975, will come as no surprise. It is a timely reminder of what public pressure can achieve these days; how sustained advocacy and publicity by interested sectors of society—magistrates, local authorities, public health workers, consumer groups—can secure legislative changes which, in this case, run counter to trade opinions and the recommendation originally made by the Food Standards Committee that such a proposal was not practical and the existing law was an adequate protection. This was stated in the FSC Report on Food Labelling of 1964, although there was no indication of the evidence reviewed or that the subject had been considered very deeply; it was, after all, only a small fraction of the problem of food labelling control. It was also stated in this Report that in certain cases, date‐stamping of food could give to purchasers a false sense of security, “not justified by the conditions under which the food has been kept since manufacture”.

All over the world, Bangladesh is well known as a flood- and cyclone-affected country. But in the recent years the slow onset disaster of drought is more frequent in Bangladesh due to climatic as well as nonclimatic variability. As a consequence, agriculture along with its dependent farmers’ livelihoods tremendously experience its adverse impacts. Therefore, the main focus of this chapter is to discuss about drought, its effects on different sectors, and how in different levels a number of drought risk management actions are carried out to cope with this insidious disaster in the context of Bangladesh.

This study aims to review the recent advancements in high entropy alloys (HEAs) called high entropy materials, including high entropy superalloys which are current potential alternatives to nickel superalloys for gas turbine applications. Understandings of the laser surface modification techniques of the HEA are discussed whilst future recommendations and remedies to manufacturing challenges via laser are outlined.

Materials used for high-pressure gas turbine engine applications must be able to withstand severe environmentally induced degradation, mechanical, thermal loads and general extreme conditions caused by hot corrosive gases, high-temperature oxidation and stress. Over the years, Nickel-based superalloys with elevated temperature rupture and creep resistance, excellent lifetime expectancy and solution strengthening L12 and γ´ precipitate used for turbine engine applications. However, the superalloy’s density, low creep strength, poor thermal conductivity, difficulty in machining and low fatigue resistance demands the innovation of new advanced materials.

HEAs is one of the most frequently investigated advanced materials, attributed to their configurational complexity and properties reported to exceed conventional materials. Thus, owing to their characteristic feature of the high entropy effect, several other materials have emerged to become potential solutions for several functional and structural applications in the aerospace industry. In a previous study, research contributions show that defects are associated with conventional manufacturing processes of HEAs; therefore, this study investigates new advances in the laser-based manufacturing and surface modification techniques of HEA.

The AlxCoCrCuFeNi HEA system, particularly the Al0.5CoCrCuFeNi HEA has been extensively studied, attributed to its mechanical and physical properties exceeding that of pure metals for aerospace turbine engine applications and the advances in the fabrication and surface modification processes of the alloy was outlined to show the latest developments focusing only on laser-based manufacturing processing due to its many advantages.

It is evident that high entropy materials are a potential innovative alternative to conventional superalloys for turbine engine applications via laser additive manufacturing.

Molecular dynamics is an emerging simulation technique in the field of machining in recent years. Many researchers have tried to simulate different processing methods of various materials with the theory of molecular dynamics (MD), and some preliminary conclusions have been obtained. However, the application of MD simulation is more limited compared with traditional finite element model (FEM) simulation technique due to the complex modeling approach and long computation time. Therefore, more studies on the MD simulations are required to provide a reliable theoretical basis for the nanoscale interpretation of grinding process. This study investigates the crystal structures, dislocations, force, temperature and subsurface damage (SSD) in the grinding of iron-nickel alloy using MD analysis.

In this study the simulation model is established on the basis of the workpiece and single cubic boron nitride (CBN) grit with embedded atom method and Morse potentials describing the forces and energies between different atoms. The effects of grinding parameters on the material microstructure are studied based on the simulation results.

When CBN grit goes through one of the grains, the arrangement of atoms within the grain will be disordered, but other grains will not be easily deformed due to the protection of the grain boundaries. Higher grinding speed and larger cutting depth can cause greater impact of grit on the atoms, and more body-centered cubic (BCC) structures will be destroyed. The dislocations will appear in grain boundaries due to the rearrangement of atoms in grinding. The increase of grinding speed results in the more transformation from BCC to amorphous structures.

This study is aimed to study the grinding of Fe-Ni alloy (maraging steel) with single grit through MD simulation method, and to reveal the microstructure evolution within the affected range of SSD layer in the workpiece. The simulation model of polycrystalline structure of Fe-Ni maraging steel and grinding process of single CBN grit is constructed based on the Voronoi algorithm. The atomic accumulation, transformation of crystal structures, evolution of dislocations as well as the generation of SSD are discussed according to the simulation results.

This paper aims to analyze the scholarly approach to examine the issues at the intersection of intellectual property rights (IPRs) and human rights (HRs) and ways to address, to examine broad categories of approaches used by the scholars in examining this conflict, their justification and to provide concrete directions for HRs framework of intellectual property.

The study conducted systematic literature review of 94 research articles published between 1996 and 2021, focusing on cross roads between IPRs and HRs.

The in-depth content analysis of 94 published research papers revealed the polarization of scholarly opinion on the HRs perspective of IPRs.

Very limited efforts were made in past to synthesize and organize scholarly research on the conflict between IPRs and HRs covering the right to education, to access information, to food, etc. besides the right to health care. This study synthesized and analyzed the scholarly research on the crossroad between IPRs and HRs, revealed critical conflict areas and collated the justifications of opposing approaches to provide inputs to international organizations, policymakers and governments for the enforcement of IPRs from the perspective of HRs.

Many people as well as the government in Bangladesh perceive floods and cyclones as recurrent environmental hazards in the country. They also view that these two hazards are the main contributors to crop loss in the country. But, in reality, droughts afflict the country at least as frequently as do major floods and cyclones, averaging about once in 2.5 years (Adnan, 1993, p. 1; Erickson, 1993, p. 5; Hossain 1990, p. 33). In some years, droughts not only cause a greater damage to crops than floods or cyclones, but they also generally affect more farmers across a wider area (Paul, 1995). If not institutionally and economically tackled, the consequences tend to have a far-reaching effect on the given society, and the socioeconomic problems would assume a chronic pattern.

This paper presents a systematic literature review, including content and bibliometric analyses, of the impact of blockchain technology (BT) in auditing, to identify trends, research areas and construct an agenda for future research.

The authors include studies from 2010 to 2020 in their structured literature review (SLR), using accounting journals on the Scopus database, which yielded 40 articles with blockchain and auditing at its core.

One of the contributions of the authors’ analyses is to group the prior research, and therefore also the agenda for future research, into three main research areas: (1) Blockchain as a tool for auditing professionals to improve business information systems to save time and prevent fraud; (2) Smart contracts enabling Audit 4.0 efficiency, reporting, disclosure and transparency; (3) Cryptocurrency and initial coin offerings (ICOs) as a springboard for corporate governance and new venture financing. The authors’ findings have several important implications for practice and theory.

The results of this study emphasise that (1) the disruption of blockchain in auditing is in a nascent phase and there is a need for compelling empirical studies and potential for the involvement of practitioners; (2) there may be a need to reconsider audit procedures especially suited for digitalisation and BT adoption; (3) standards, guidelines and training are required to pivot towards and confront the challenge BT will represent for auditing; and (4) there are two sides to the BT coin for auditing, enthusiasm about the potential and risk upon implementation. These practical implications can also be seen as a template for future research in a quest to align theory and practice.

The authors’ SLR facilitates the identification of research areas and implications, forming a useful baseline for practitioners, professionals and academics, as they draft the state of the art on the disruption of blockchain in auditing, highlighting how BT is changing auditing activities and traditions.