Markus Brauer, Anissa Dumesnil and Mitchell Robert Campbell
Despite more than half a century of academic research, relatively few methods have been shown to reliably improve intergroup relations in the real world. This paper aims to use a…
Abstract
Purpose
Despite more than half a century of academic research, relatively few methods have been shown to reliably improve intergroup relations in the real world. This paper aims to use a social marketing approach to design a pro-diversity intervention in a university setting.
Design/methodology/approach
We conducted extensive qualitative, quantitative and observational background research to identify elements that would increase the effectiveness of the intervention. Focus groups and surveys allowed us to identify a target audience, target behaviors and the relevant barriers and benefits.
Findings
The background research suggested increasing inclusive behavior would have a greater impact than reducing discriminatory behavior. Based on this research, this paper determined an optimal target audience was students who had relatively positive attitudes toward diversity but engaged in few inclusive behaviors. This paper used relevant theories from the behavioral sciences to design an intervention that promoted a small set of inclusive behaviors and that addressed the relevant barriers and benefits. The intervention took the form of a single page of targeted messages that instructors can add to their course syllabi. The page communicates injunctive and descriptive norms, highlights the benefits of behaving inclusively and provides concrete behavioral advice.
Originality/value
The research applies the social marketing approach to a novel domain. This approach represents a new way to advance diversity, equity and inclusion through promoting inclusive and reducing discriminatory behavior.
Details
Keywords
Nathaniel Kaill, Robert Campbell and Patrick Pradel
This study aims to investigate the relationship between part porosity and mechanical properties of short-fibre reinforced polylactic acid printed via multi-axis material extrusion…
Abstract
Purpose
This study aims to investigate the relationship between part porosity and mechanical properties of short-fibre reinforced polylactic acid printed via multi-axis material extrusion (MAMEX) to establish guidelines for optimal process configurations.
Design/methodology/approach
Material properties graphs provide the basis for studying the relationship between porosity and mechanical behaviour. Using the correlations found in this study, the way to improve printing strategies and filament properties can be deducted directly from an analysis of the print path and the final influence on mechanical performance.
Findings
Some commercial brands of short-fibre reinforced filament present inherent porosity that weakens the mechanical behaviour of MAMEX components.
Originality/value
Low-cost MAMEX allows the production of components that do not present anisotropic behaviour and are mechanically optimised through the alignment of the filaments along with internal stresses. This paper also addresses the effects of multi-axis deposition strategies on the resulting porosity and proposes improvements to reduce residual porosity, thus increasing the mechanical performance in the future.
Details
Keywords
Nathaniel Kaill, Robert Campbell and Patrick Pradel
The purpose of this paper is to select a product suitable for printing via multi-axis additive manufacturing (MAAM), print it and test it to determine if, by using a multi-axis…
Abstract
Purpose
The purpose of this paper is to select a product suitable for printing via multi-axis additive manufacturing (MAAM), print it and test it to determine if, by using a multi-axis approach, it would be possible to create end use products that can withstand mechanical loading.
Design/methodology/approach
The methodology used in this study is a MAAM approach, and through the creation of an initial model and finite element analysis (FEA), the dominant stress vectors are identified. Using the orientation of these vectors, a three-dimensional tool path is constructed that follows the directionality as close as can be achieved while accounting for rotational road paths. This tool path is converted into a G-code and run on a 5-axis material extrusion printer. The printed samples were then tested according to the ISO standard to determine whether this can be a viable manufacturing technique.
Findings
The methodology used in this study enabled the production samples to withstand an average force of 1,100 N. This level is above the required safety threshold for the given standard. Furthermore, this reactive force is within 300 N of the typical metal sample, while being 25% of the typical weight for a conventional sample product. With a redesign and further research, it is possible to match the mechanical behaviour.
Originality/value
Recently, there has been an increased level of interest in MAAM. The research contained within this paper is original in its application of this printing method to explore whether it is possible to make end use products that meet the existing standards required by them.
Details
Keywords
Vito Ricotta, Robert Ian Campbell, Tommaso Ingrassia and Vincenzo Nigrelli
The purpose of this paper is to implement a new process aimed at the design and production of orthopaedic devices fully manufacturable by additive manufacturing (AM). In this…
Abstract
Purpose
The purpose of this paper is to implement a new process aimed at the design and production of orthopaedic devices fully manufacturable by additive manufacturing (AM). In this context, the use of generative algorithms for parametric modelling of additively manufactured textiles (AMTs) also has been investigated, and new modelling solutions have been proposed.
Design/methodology/approach
A new method for the design of customised elbow orthoses has been implemented. In particular, to better customise the elbow orthosis, a generative algorithm for parametric modelling and creation of a flexible structure, typical of an AMT, has been developed.
Findings
To test the developed modelling algorithm, a case study based on the design and production of an elbow orthosis made by selective laser sintering was investigated. The obtained results have demonstrated that the implemented algorithm overcomes many drawbacks typical of the traditional computer aided design (CAD) modelling approaches. The parametric CAD model of the orthosis obtained through the new approach is characterised by a flexible structure with no deformations or mismatches and has been effectively used to produce the prototype through AM technologies.
Originality/value
The obtained results present innovative elements of originality in the CAD modelling sector, which can contribute to solving problems related to modelling for AM in different application fields.
Details
Keywords
Yuran Jin, Robert Campbell, Jinhuan Tang, Huisheng Ji, Danrong Song and Xiaoqin Liu
Global economic growth provides new opportunities for the development of clothing enterprises, but at the same time, the rapid growth of clothing customization demand and the…
Abstract
Purpose
Global economic growth provides new opportunities for the development of clothing enterprises, but at the same time, the rapid growth of clothing customization demand and the gradual increase of clothing costs also pose new challenges for the development of clothing enterprises. In this context, 3D printing technology is injecting new vitality and providing a new development direction for the vigorous development of clothing enterprises. However, with the application of 3D printing technology, more and more clothing enterprises are facing the problem of business model innovation. In view of the lack of relevant research, it is necessary to carry out exploratory research on this issue.
Design/methodology/approach
The business model canvas method was adopted to design business model for clothing enterprises using 3D printing. The simulation model of the designed business model was constructed by a system dynamics method, and the application of the designed business model was analysed by a scenario simulation.
Findings
Mass selective customization-centralized manufacturing (MSC-CM) business model was constructed for clothing enterprises using 3D printing, and a static display was carried out using the BMC method. A dynamic simulation model of the MSC-CM business model was constructed. The future scenario of clothing enterprises using 3D printing was developed, and a simulated enterprise was analysed. The results show that the MSC-CM business model has a good application value. The simulation model of the MSC-CM business model performs the function of a business strategy experiment platform and also has a good practical application value.
Research limitations/implications
The MSC-CM business model is only a typical business model for clothing enterprises using 3D printing. It is necessary to further develop other business models, and some elements of the MSC-CM business model need to be further improved. In addition, the MSC-CM business model simulation uses a general model, which is not suitable for all clothing enterprises using 3D printing. When the model is applied, the relevant enterprises can further adjust and optimize it, thereby improving the validity of the simulation model.
Originality/value
To the best of the authors’ knowledge, this is the first paper on the MSC-CM business model for garment enterprises using 3D printing. Secondly, it is the first time that the business model of clothing enterprises using 3D printing has been simulated. In particular, the proposed business model simulation provides the possibility for testing the business strategy of clothing enterprises using 3D printing. In addition, a positive attempt has been made in the collaborative research of using both a static display business model and a dynamic simulation business model.
Details
Keywords
THE great advantage the contemporary librarian enjoys is the opportunity of meeting his fellows at so many library assemblies. It might almost be wondered whether, in such…
Abstract
THE great advantage the contemporary librarian enjoys is the opportunity of meeting his fellows at so many library assemblies. It might almost be wondered whether, in such opulence, the one great Conference in September is really necessary: a wonder that is immediately modified by the thought that no other meeting can give a representation of what the profession as a whole is doing or hoping to do; the many parts of the whole come together briefly then. It is the more necessary that the Conference makes this annual revelation, and does it manifestly. This is “much easier said than done”. Looking back on the almost complete disregard by the Press of the Folkestone meeting, in spite of our own statement that we had sought publicity for at least half a century in vain, we are compelled to think that renewed efforts should be made to attract the newspapers, radio and T.V. in the service of libraries. We are assuming that such notoriety is desirable, an assumption which some deny. If it is, our programmes must be ready sooner, advance matter of papers should be in the hands of editors before they are read, paragraphs for the B.B.C. and other public address organizations should be prepared and distributed even longer, before the newspapers get them. All this, however, must be based upon the proceedings themselves which, as we have affirmed often, should with a few inspirational exceptions be based upon the programme of service every type of library gives to the community.
Candace Jones and Silviya Svejenova
City identity is a distinct form of collective identity based on the perceived uniqueness and meanings of place, rather than group category and membership. A city’s identity is…
Abstract
City identity is a distinct form of collective identity based on the perceived uniqueness and meanings of place, rather than group category and membership. A city’s identity is constructed over time through architecture, which involves three sign systems – material, visual, and rhetorical – and multiple institutional actors to communicate the city’s distinctiveness and identity. We compare Barcelona and Boston to examine the identity and meaning created and communicated by different groups of professionals, such as architects, city planners, international guide book writers, and local cultural critics, who perform the semiotic work of constructing city identity.
Details
Keywords
Abstract
Details
Keywords
The Bureau of Economics in the Federal Trade Commission has a three-part role in the Agency and the strength of its functions changed over time depending on the preferences and…
Abstract
The Bureau of Economics in the Federal Trade Commission has a three-part role in the Agency and the strength of its functions changed over time depending on the preferences and ideology of the FTC’s leaders, developments in the field of economics, and the tenor of the times. The over-riding current role is to provide well considered, unbiased economic advice regarding antitrust and consumer protection law enforcement cases to the legal staff and the Commission. The second role, which long ago was primary, is to provide reports on investigations of various industries to the public and public officials. This role was more recently called research or “policy R&D”. A third role is to advocate for competition and markets both domestically and internationally. As a practical matter, the provision of economic advice to the FTC and to the legal staff has required that the economists wear “two hats,” helping the legal staff investigate cases and provide evidence to support law enforcement cases while also providing advice to the legal bureaus and to the Commission on which cases to pursue (thus providing “a second set of eyes” to evaluate cases). There is sometimes a tension in those functions because building a case is not the same as evaluating a case. Economists and the Bureau of Economics have provided such services to the FTC for over 100 years proving that a sub-organization can survive while playing roles that sometimes conflict. Such a life is not, however, always easy or fun.