Search results

Recently, several studies have been performed on lap welding of aluminum and copper using friction stir welding (FSW). The formation of intermetallic compounds at the weld interface hampers the weld quality. The use of an intermediate layer of a compatible material during welding reduces the formation of intermetallic compounds. The purpose of this paper is to optimize the FSW process parameters for AA6063-ETP copper weld, using a compatible zinc intermediate filler metal.

In the present study, a three-level, three-factor central composite design (CCD) has been used to determine the effect of various process parameters, namely, tool rotational speed, tool traverse speed and thickness of inter-filler zinc foil on ultimate tensile strength of the weld. A total of 60 experimental data were fitted in the CCD. The experiments were performed with tool rotational speeds of 1,000, 1,200 and 1,400 rpm each of them with tool traverse speeds of 5, 10 and 15 mm/min. A zinc inter-filler foil of 0.2 and 0.4 mm was also used. The macrograph of the weld surface under different process parameters and the tensile strength of the weld have been investigated.

The feasibility of joining 3 mm thick AA6063-ETP copper using zinc inter-filler is established. The regression analysis showed a good fit of the experimental data to the second-order polynomial model with a coefficient of determination (R²) value of 0.9759 and model F-value of 240.33. A good agreement between the prediction model and experimental findings validates the reliability of the developed model. The tool rotational speed, tool traverse speed and thickness of inter-filler zinc foil significantly affected the tensile strength of the weld. The optimal conditions found for the weld were, rotational speed of 1,212.83 rpm and traverse speed of 9.63 mm/min and zinc foil thickness is 0.157 mm; by using optimized values, ultimate tensile strength of 122.87 MPa was achieved, from the desirability function.

Aluminium and copper sheets could be joined feasibly using a zinc inter-filler. The maximum tensile strength of joints formed by inter-filler (122.87 MPa) was significantly better as compared to those without using inter-filler (83.78 MPa). The optimum process parameters to achieve maximum tensile strength were found by CCD.

The purpose of this paper is to present topological derivatives-based reconstruction algorithms to solve an inverse scattering problem for penetrable obstacles.

The method consists in rewriting the inverse reconstruction problem as a topology optimization problem and then to use the concept of topological derivatives to seek a higher-order asymptotic expansion for the topologically perturbed cost functional. Such expansion is truncated and then minimized with respect to the parameters under consideration, which leads to noniterative second-order reconstruction algorithms.

In this paper, the authors develop two different classes of noniterative second-order reconstruction algorithms that are able to accurately recover the unknown penetrable obstacles from partial measurements of a field generated by incident waves.

The current paper is a pioneer work in developing a reconstruction method entirely based on topological derivatives for solving an inverse scattering problem with penetrable obstacles. Both algorithms proposed here are able to return the number, location and size of multiple hidden and unknown obstacles in just one step. In summary, the main features of these algorithms lie in the fact that they are noniterative and thus, very robust with respect to noisy data as well as independent of initial guesses.

This paper offers a fresh perspective on this debate by exploring the direct relationship between a firm’s stock price performance and its CSR activities, placing particular emphasis on the underlying intent or motive behind the CSR initiatives.

This research examines the relationship between a firm’s stock price and its corporate social responsibility (CSR) activities, distinguishing between responsive and adaptive CSR. While responsive CSR, often a response to negative events, elicits immediate positive stock performance, adaptive CSR initially triggers negative stock performance. However, long-term analysis reveals adaptive CSR leads to positive stock performance, especially for family firms. The study challenges the notion of market myopia, suggesting the market values responsive CSR in the short term but recognizes the long-term benefits of adaptive CSR over time. Clear communication about adaptive CSR intentions and benefits may help in accurate market valuation.

This research examines the relationship between a firm’s stock price and its CSR activities, distinguishing between responsive and adaptive CSR. While responsive CSR, often a response to negative events, elicits immediate positive market reactions, adaptive CSR initially triggers negative reactions. However, long-term analysis reveals adaptive CSR leads to positive returns, especially for family firms.

The study challenges the notion of market myopia, suggesting the market values responsive CSR in the short term but recognizes the long-term benefits of adaptive CSR over time. Clear communication about adaptive CSR intentions and benefits may help in accurate market valuation.

First, it expands on previous studies by exploring how the different motivations behind CSR activities lead to varying effects on stock returns. Second, it sheds new light on the subject of market myopia. The findings demonstrate that adaptive CSR initiatives can initially trigger market reactions similar to those caused by perceived over-investment, in contrast to the more favorable response to responsive CSR activities.

The purpose of this paper is to study the effect of the addition of silicon carbide (SiC) microparticles and their contributions regarding the tensile and shear properties of the T800 fiber reinforced polymer composite at various fiber volume fractions. The tensile and shear properties of the hybrid composites where continuous T800 fibers are used as reinforcements in an epoxy matrix embedded with SiC microparticles have been studied.

The results were obtained by implementing a micromechanics approach assuming a uniform distribution of reinforcements and considering one unit cell from the whole array. Using the two-step homogenization process, the properties of the materials were determined by using the finite element analysis (FEA). The predicted elastic properties from FEA were compared with the analytical results. The analytical models were implemented in the MATLAB Software. The FEA was performed in ANSYS APDL.

The mechanical properties of the hybrid composite had increased when compared with the properties of the conventional FRP. The results suggest that SiC particles are a good reinforcement for enhancing the transverse and shear properties of the considered fiber reinforced epoxy composite. The microparticle embedment has significant effect on the transverse tensile properties as well as in-plane and out-of-plane shear properties.

This is significant because improving the properties of the composite materials using different methods is of high interest in the materials community. Using this study people can work on the process of including different type of microparticles in to their composite designs and improve their performance characteristics. The major influence of the particles can be seen only at lower volume fractions of the fiber in the composite. Only FEA and analytical methods were used for the study.

Material property improvements lead to more advanced designs for aerospace and defense structures, which allow for high performance under unpredictable conditions.

This type of study proves that the embedment of different microparticles is a method that can be used for improving the properties of the composite materials. The improvement of the transverse and shear properties will be useful especially in the design of shell structures in the different engineering applications.

The study aims to assess the impact of disruptive frugal digital technology and small and medium-sized enterprises' (SMEs') innovation performance on the food sector in Masvingo urban, Zimbabwe. A descriptive research design was used, and quantitative data were obtained using a questionnaire survey on 50 restaurant employees and 100 customers. The empirical findings demonstrated that the performance of SMEs was significantly improved by social media, cloud computing, virtual reality (VR), augmented reality (AR), and robotics. The study concludes that disruptive digital technologies (social media, cloud computing, AR, VR and robots affect the performance of SMEs by improving food production, streamlining information transfer, and utilizing cutting-edge technical applications. This chapter recommends that the government, through those in charge of formulating policy, educate and encourage the adoption of disruptive digital technology. The application of social media, cloud computing, VR, AR, and robotics will increase local food producers' access to the market. Digitalization will have a significant effect on Zimbabwe's local food system in the future.

This paper compares impact of Industry 4.0 / emerging information and communication Technologies (ICTs), for example, Internet of things (IOT), machine learning, artificial intelligence (AI), robotics and cloud computing, on 22 organisational performance indicators under nine combinations of Lean Six Sigma (LSS) and quality management systems (QMS).

Survey of 105 Indian organisations was done about their experience of using QMS, Lean Six Sigma and emerging ICTs. Respondents included both manufacturing and service enterprises of different scales and sectors. The responses collected were compared, and statistically significant difference among them was evaluated using chi-square test.

The study confirmed statistically significant difference among 20 organisational performance indicators under different combinations of QMS, LSS and ICTs. These indicators include quality performance, delivery performance, sales turnover, inventory level and so forth. However, for two indicators, namely, absenteeism and throughput, significant difference in responses was not established.

All possible combinations of QMS, LSS, only LSS tools and ICTs were not studied because of either theoretical impossibility (e.g. using LSS without LSS tools) or practically rare situations (e.g. organisations using ICTs and LSS without QMS). Furthermore, the impact from different sequences of implementing QMS, LSS and ICTs can be studied.

Using this study, practitioners can identify which LSS, Quality System and ICT combination results in best performance and quick success. On theoretical front, the study confirms impact of LSS and QMS on organisational performance.

This study evaluates organisational performance under several possible combinations of QMS, LSS, and emerging ICTs, which was so far unexplored.

India is in the process to achieve an important place in $2,000bn global food trade. In order to achieve this goal, there is a need to develop a food safety system which is well written down in line with international practices that are highly coordinated based on self-compliance to assure consumer protection. Accordingly, many organizations undergo assessment of their food safety system to verify compliance internally as well as externally. The purpose of this paper is to provide insight on the critical factors and benefits by evaluating the food safety assessment practices.

A questionnaire-based survey is conducted among 96 Indian food business operators and regulators involved in assessment practices to obtain critical factors for the assessment of food safety practices. The questionnaire captures indicators for motivations or challenges and benefits of food safety assessment to identify critical factors using exploratory factor analysis. Model for the food safety assessment practices was developed based on multiple regression analysis by determining the impact of factors on the benefits of food safety assessment.

This paper identifies four factors responsible for assessing food safety practices, namely, business-centric approach, legislative needs, technical practices and organization resentment as a combination of reasons and challenges along with two benefits risk: protection and organization reinforcement. The regression analysis indicates that the organization reinforcement gets positively impacted by business and technical practices and negatively by organization resentment. Risk protection has a significant relationship with legislative needs.

This is the first attempt to systematically explore the factors around the assessment of food safety practices in India. This study provides inputs for the practical application of managers and regulators.

The ever-widening competitive global markets demand food business to demonstrate safe food supplies across the world. The causes of food borne illness are complex to determine and require a careful evaluation of all stages of food supply chain and food safety practices. The purpose of this paper is to systematically investigate the factors responsible for the assessment of food supply chain and evaluation of food safety system in India.

The study utilizes a combination of qualitative and quantitative approach by exploring expert’s opinion systematically using a semi-structured interview followed by careful grouping of responses using the grounded theory approach to build the research theme. The prioritization of the critical factors is carried out using Pareto analysis. The methodological review was carried out to identify factors and categorize them based on their impact on hierarchical logical relationship using total interpretive structural modeling approach to determine the enablers.

This paper attempts to deliver an inimitable list of seven vital factors for the effective design of evaluation system for food safety practices. The study provides a careful insight on the issue pertaining to designing of assessment system including competence building for assessor and availability of well-defined technical protocol. The recommendation for developing a robust food safety inspection system by implementing stricter regulation, enhancing competence and design initiatives is provided.

The study provides a unique list of factors for the assessment of food safety practices and develops the relationship. Food safety assessment is an integral part of food safety study which is systematically explored and conceptualized in this paper. The study is carried out using the opinion of Indian experts.

Through bibliometric analysis, the study intends to reveal the evolution of the trends in the Scopus database, the scope of research and the connection between technology and entrepreneurship.

This study uses a comprehensive science mapping approach, integrating network visualisation to map research groups, bibliometric analysis to measure publication trends and thematic analysis to identify overarching themes. This study uses a thorough technique to examine the complex interaction between technology and entrepreneurship from 2000 to 2023. The collection includes information from various sources, creating a corpus of 2,207 documents. These sources include 698 scholarly journals, books and other publications.

According to the report, the interest in technology and entrepreneurship is expanding. The three nations conducting the most study on this subject is the USA, the UK and Italy. Some of the top writers in this area include James A. Cunningham, Alison N. Link and David B. Audretsch.

The study found possibilities and problems associated with the interaction between technology and entrepreneurship. Additionally, the study found several research holes in this area. The study also noted some research gaps in this field, including those related to the sustainability of society and the environment, the effects of entrepreneurship on inequality and the difficulties faced by entrepreneurs in underdeveloped nations.

This study thoroughly overviews the business and technology sectors. It outlines some of the difficulties that must be overcome whilst identifying the main research trends in this field. Researchers, decision-makers and businesspeople interested in using technology for entrepreneurial endeavours can all benefit from the study’s findings.

This study’s dataset’s scope, which might not include all pertinent publications, is one of its limitations. Nevertheless, the results add to a thorough picture of the state of the profession and recent developments. This study’s insights are valuable for researchers, policymakers and entrepreneurs interested in leveraging technology for entrepreneurial pursuits.

The research points to a number of directions that need more inquiry, such as in-depth studies into the social and environmental implications of technology-driven entrepreneurship and methods to combat inequality.

The purpose of this study is on AISI 409 M ferritic stainless steel (FSS) which is developing a preferred choice for railway carriages, storage tanks and reactors in chemical plants. The intergranular corrosion behavior of welded SS 409 M has been studied in H₂SO₄ solution (0.5 M) with the addition of NH₄SCN (0.01 M) with different heat input. As this study is very important in context of various chemical and petrochemical industries.

The microstructure, mechanical properties and intergranular corrosion properties of AISI 409 M FSS using shielded metal arc welding were investigated. Shielded metal arc welding with different welding current values are used to change the heat input in the joints resulted in the microstructural variations. The microstructure of the welded steel was carefully inspected along the width of the heat-affected zone (HAZ) and the transverse-section of the thin plate.

The width of heat affected zone (3.1,4.2 and 5.8 mm) increases on increasing the welding heat input. Due to change in grain size (grain coarsening) as HAZ increased. From the microstructure, it was observed that the large grain growth which is dendritic and the structure become finer to increase in welding heat input. For lower heat input, the maximum microhardness value (388HV) was observed compared with medium (351 HV) and higher heat input (344 HV), which is caused by a rapid cooling rate and the depleted area of chromium (Cr) and nickel (Ni). The increase in weld heat input decreases tensile strength, i.e. 465 MPa, 440 MPa and 418 MPa for low, medium and high heat input, respectively. This is because of grain coarsening and chromium carbide precipitation in sensitized zone and wider HAZ. The degree of sensitization increases (27.04%, 31.86% and 36.08%) to increase welding heat input because of chromium carbide deposition at the grain boundaries. The results revealed that the higher degree of sensitization and the difference in intergranular corrosion behavior under high heat input are related to the grain growth in the HAZ and the weld zone.

The study is based on intergranular corrosion behavior of welded SS 409 M in H2SO4 solution (0.5 M) with the addition of NH4SCN (0.01 M) with different heat input which is rarely found in literature.