Search results

This paper aims to examine the effect of Dufour and Soret diffusions on Al₂O₃-water nanofluid flow over a moving thin needle by using the Tiwari and Das model.

The governing equations are reduced to the similarity equations using similarity transformations. The resulting equations are programmed in Matlab software through the bvp4c solver to obtain their solutions. The features of the skin friction, heat transfer and mass transfer coefficients, as well as the velocity, temperature and concentration profiles for different values of the physical parameters, are analysed and discussed.

The non-uniqueness of the solutions is observed for a certain range of the physical parameters. The authors also notice that the bifurcation of the solutions occurs in which the needle moves toward the origin (λ < 0). It is discovered that the first branch solutions of the skin friction coefficient and the heat transfer coefficients increase, but the mass transfer coefficient decreases in the presence of nanoparticle. Additionally, the simultaneous effect of Dufour and Soret diffusions tends to enhance the heat transfer coefficient; however, dual behaviours are observed for the mass transfer coefficient. Further analysis shows that between the two solutions, only one of them is stable and thus physically reliable in the long run.

The problem of Al₂O₃-water nanofluid flow over a moving thin needle with Dufour and Soret effects are the important originality of the present study. Besides, the temporal stability of the dual solutions is examined for time.

In optimum designs of deep-groove ball bearings (DDGBs), an extended service life is one of the vital criteria. The life of a bearing depends on several factors. The purpose of this paper is to sequentially optimize three prime objectives for DDGB, i.e. the dynamic capacity (C_d), the maximum bearing temperature (T_max) and the elasto-hydrodynamic minimum film thickness (H_min).

For solving constrained non-linear optimization formulations with multitude of objectives, an optimal design methodology has been put forth with the help of artificial bee colony algorithms. A study on the constraint violation has been carried out. By the Monte Carlo simulation method, a sensitivity investigation of diverse design variables has been done to examine variations in three objective functions and violation of constraints.

Excellent improvement in the dynamic capacity (C_d), the maximum bearing temperature (T_max) and the elasto-hydrodynamic minimum film thickness (H_min) have been found in optimized bearing designs.

Ball bearing design has been done based on multi-discipline objectives that are based on strength, tribology and thermal consideration. This type of design is essential in practical scenario where these physical phenomena will be present simultaneously.

The fatigue, thermal and wear-based bearing lives are the most important factors in the design of spherical roller bearings (SRBs). The main novelty of the present work is consideration of thermal effects as an additional objective function. The dynamic capacity (Cd), the elasto-hydrodynamic minimum film thickness (h_min) and the maximum bearing temperature (T_max) are related directly with overall lives of the bearing, and these constitute the multiple tasking operating requirements for the design of bearings.

These tasks depend upon various bearing design variables and associated constraints to help in formulating the realistic design optimization problem and in the present work these have been used to get optimal designs of SRBs in the form of Pareto-optimum fronts by using genetic algorithms.

The optimized lives show higher values as compared to the standard lives and better design choices as compared to that are available in the literature. The robustness of obtained designs are shown by conducting the sensitivity analysis of optimized operating requirements by perturbing optimum bearing variables.

The robustness of the design could be improved by optimizing tolerances of design variables based on desired variation in multiple tasking operating requirements.

For the aerospace and space applications such critical design of bearings are required based on multiple tasking operating requirements. For example for higher temperature application in gearboxes, turbines and drilling equipment.

In critical applications, multiple tasking operating requirements are essential and often bearings put limit to the life of satellites and aircraft, and bearing design methodology proposed and implemented in the present paper addresses these issues, especially addition of thermal issue in bearing design.

This SWOT (strengths, weaknesses, opportunities and threats) analysis was conducted to have a portrait of the competitiveness of Council of Scientific and Industrial Research (CSIR) on the global map. Being a 75-year-old scientific organization, CSIR has raised each and every laboratory with a specific mandate and competency. It is definite that the organization would get some assistance from these points, which are briefly stated, as the institutional data reside with the laboratory only. To some extent, they can be considered on their discretion; however, the organization has raised its position to international standards, but still it can consider few areas/suggestions from this analysis. These points are suggestive and flexible in nature, which are identified and defined to elevate this organization on the globe. Scientific publications do make a difference, but on the ground, if the technologies are not viable and received by public, it makes no difference. Today, India is fortunate to have a Prime Minister like Mr Modi, who always re-evaluates the issues and solutions so that the country moves from developing to a fast-pace developed nation. It is a fact that if these research organizations reorganize themselves and prioritize the research problems, they are capable enough to become a pioneer among the world R&D industry. This paper aims to analyze the organization and suggest few points with significant findings which can assist in scaling toward excellence on a global scale.

On the basis of random sampling, laboratories were identified where their achievements and contribution toward industry and society were evaluated. On the basis of their setup, the organization and laboratories were evaluated to frame-out a SWOT analysis.

SWOT analysis is a deliberate technique carried out to analyze the current situation of the system and to analyze the internal and external environment, which provides and edge to the organization to sustain. The major factors assessed were manpower, machines, money and funding, and achievements and deliverables were studied.

The research, i.e. SWOT, is unique in nature, as it was not carried out earlier on such a scale. To some extent, the points suggested in SWOT and conclusion can be considered on their discretion; however, the organization has raised its position to international standards, but still it can consider few areas/suggestions from this analysis. These points are suggestive and flexible in nature, which are identified and defined to elevate this organization on the globe. Scientific publications do make a difference, but on the ground; if the technologies are not viable and received by public, it makes no difference. Today, India is fortunate to have a Prime Minister like Mr Modi, who always re-evaluates the issues and solutions so that the country moves from developing to a fast-pace developed nation. It is a fact that if these research organizations reorganize themselves and prioritize the research problems, they are capable enough to become a pioneer among the world R&D industry.

In the present article, sensitivity analysis was studied in the presence of the combined effects of thermal radiation, suction and magnetohydrodynamics (MHD) effects on a Nimonic 80A-Fe_3O4/water hybrid nanofluid across moving a wedge with variable surface temperature and buoyancy effects.

The governing equations were transformed using similarity transformations and solved using MATLAB bvp4c code and response surface methodology (RSM), with quadratic face-centred central composite design being implemented. All results and graphs were formulated after positive outcomes of our results with existing literature.

An increase in magnetic parameter (M) and velocity ratio parameter (R) resulted in an increase in velocity profiles and local Nusselt number, while a reverse trend was observed for temperature profiles. With radiation parameter Rd = 0.8, the local Nusselt number increased by 4.08% as the velocity ratio parameter increased from R = 0.0 to R = 0.5. The Nusselt number was found to be most sensitive to R, while the latter produced negative sensitivity on skin friction coefficient. The skin friction coefficient for the hybrid nanofluid model increased by 35.39% compared to the regular fluid model, with a very low standard deviation value of 10⁻⁴. The Model F-value for Nusselt number model was found to be 939278.49 with a noise ratio of 3618.711. Skin friction coefficient was found to be most sensitive with respect to changes in the parametric values of M.

Nimonic 80A being a super-alloy of nickel-iron-chromium and built in high frequency melting, it can work up to 1500°F and is extensively used in automobile exhaust valves.

The present study finds numerous applications in biotoxicity studies, medical industries, water heaters and the forging of hot exhaust valve heads.

In view of various applications of our present study, there remains a gap in examining the sensitivity analysis of a hybrid nanofluid flow model across a moving permeable wedge using the Tiwari–Das model, which required clinical investigations numerically and statistically.

In this study, we investigate the effects of an extended ternary hybrid Tiwari and Das nanofluid model on ethylene glycol flow, with a focus on heat transfer. Using the Cross non-Newtonian fluid model, we explore the heat transfer characteristics of this unique fluid in various applications such as pharmaceutical solvents, vaccine preservatives, and medical imaging techniques.

Our investigation reveals that the flow of this ternary hybrid nanofluid follows a laminar Cross model flow pattern, influenced by heat radiation and occurring around a stretched cylinder in a porous medium. We apply a non-similarity transformation to the nonlinear partial differential equations, converting them into non-dimensional PDEs. These equations are subsequently solved as ordinary differential equations (ODEs) using MATLAB’s bvp4c tools. In addition, the magnetic number in this study spans from 0 to 5, volume fraction of nanoparticles varies from 5% to 10%, and Prandtl number for EG as 204. This approach allows us to examine the impact of temperature on heat transfer and distribution within the fluid.

Graphical depictions illustrate the effects of parameters such as the Weissenberg number, porous parameter, Schmidt number, thermal conductivity parameter, Soret number, magnetic parameter, Eckert number, Lewis number, and Peclet number on velocity, temperature, concentration, and microorganism profiles. Our results highlight the significant influence of thermal radiation and ohmic heating on heat transmission, particularly in relation to magnetic and Darcy parameters. A higher Lewis number corresponds to faster heat diffusion compared to mass diffusion, while increases in the Soret number are associated with higher concentration profiles. Additionally, rapid temperature dissipation inhibits microbial development, reducing the microbial profile.

The numerical analysis of skin friction coefficients and Nusselt numbers in tabular form further validates our approach. Overall, our findings demonstrate the effectiveness of our numerical technique in providing a comprehensive understanding of flow and heat transfer processes in ternary hybrid nanofluids, offering valuable insights for various practical applications.

The purpose of this paper is to address various works on mixed convection and proposes 10 unified models (Models 1–10) based on various thermal and kinematic conditions of the boundary walls, thermal conditions and/ or kinematics of objects embedded in the cavities and kinematics of external flow field through the ventilation ports. Experimental works on mixed convection have also been addressed.

This review is based on 10 unified models on mixed convection within cavities. Models 1–5 involve mixed convection based on the movement of single or double walls subjected to various temperature boundary conditions. Model 6 elucidates mixed convection due to the movement of single or double walls of cavities containing discrete heaters at the stationary wall(s). Model 7A focuses mixed convection based on the movement of wall(s) for cavities containing stationary solid obstacles (hot or cold or adiabatic) whereas Model 7B elucidates mixed convection based on the rotation of solid cylinders (hot or conductive or adiabatic) within the cavities enclosed by stationary or moving wall(s). Model 8 is based on mixed convection due to the flow of air through ventilation ports of cavities (with or without adiabatic baffles) subjected to hot and adiabatic walls. Models 9 and 10 elucidate mixed convection due to flow of air through ventilation ports of cavities involving discrete heaters and/or solid obstacles (conductive or hot) at various locations within cavities.

Mixed convection plays an important role for various processes based on convection pattern and heat transfer rate. An important dimensionless number, Richardson number (Ri) identifies various convection regimes (forced, mixed and natural convection). Generalized models also depict the role of “aiding” and “opposing” flow and combination of both on mixed convection processes. Aiding flow (interaction of buoyancy and inertial forces in the same direction) may result in the augmentation of the heat transfer rate whereas opposing flow (interaction of buoyancy and inertial forces in the opposite directions) may result in decrease of the heat transfer rate. Works involving fluid media, porous media and nanofluids (with magnetohydrodynamics) have been highlighted. Various numerical and experimental works on mixed convection have been elucidated. Flow and thermal maps associated with the heat transfer rate for a few representative cases of unified models [Models 1–10] have been elucidated involving specific dimensionless numbers.

This review paper will provide guidelines for optimal design/operation involving mixed convection processing applications.

The purpose of this paper is to discuss the 3D micropolar hybrid (Ag-CuO/H₂O) nanofluid past rapid moving surface, where porous medium has been considered.

The model of problem was represented by highly partial differential equations which were deduced by using suitable approximations (boundary layer). Then, the governing model was converted into five combined ordinary differential equations applying proper similarity transformations. Therefore, the eminent iterative Runge–Kutta–Fehlberg method (RKF45) has been applied to solve the resulting equations.

Higher values of vortex viscosity, spin gradient viscosity and micro-inertia density parameters are reduced in horizontal direction, whereas opposite behaviour is noticed for vertical direction.

The work has not been done in the area of hybrid micropolar nanofluid. Hence, this article culminates to probe how to improve the thermal conduction and fluid flow in 3D boundary layer flow of micropolar mixture of nanoparticles driven by rapidly moving plate with convective boundary condition.

This paper aims to examine the squeezing flow of hybrid nanofluid within the two parallel disks. The 50:50% water–ethylene glycol mixture is used as a base fluid to prepare Ag–Fe_3O_4 hybrid nanofluid. Entropy generation analysis is examined by using the second law of thermodynamics, and Darcy’s modal involves estimating the behavior of a porous medium. The influences of Viscous dissipation, Joule heating and thermal radiation in modeling are further exerted into concern.

For converting partial differential systems to ordinary systems, a transformation technique is used. For the validation part, the numerical solution is computed by embracing a fourth-order exactness program (bvp4c) and compared with the analytical solution added by the homotopy analysis method (HAM). Graphical decisions expose the values of miscellaneous-arising parameters on the velocity, temperature and local-Nusselt numbers.

Hybrid nanofluid gives significant enhancement in the rate of heat transfer compared with nanofluid. The outcomes indicate that the average Nusselt number and entropy generation are increasing functions of the magnetic field, porosity and Brinkman number. When the thermal radiation rises, the average Nusselt number diminishes and the entropy generation advances. Furthermore, combining silver and magnetite nanoparticles into the water–ethylene glycol base fluid significantly enhances entropy generation performance.

Entropy generation analysis of the magneto-hydrodynamics (MHD) fluid squeezed between two parallel disks by considering Joule heating, viscous dissipation and thermal radiation for different nanoparticles is addressed. Furthermore, an appropriate agreement is obtained in comparing the numerical results with previously published and analytical results.