Search results

1 – 10 of 235
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 12 July 2021

Yong Peng, Yi Juan Luo, Pei Jiang and Peng Cheng Yong

Distribution of long-haul goods could be managed via multimodal transportation networks where decision-maker has to consider these factors including the uncertainty of…

539

Abstract

Purpose

Distribution of long-haul goods could be managed via multimodal transportation networks where decision-maker has to consider these factors including the uncertainty of transportation time and cost, the timetable limitation of selected modes and the storage cost incurred in advance or delay arriving of the goods. Considering the above factors comprehensively, this paper establishes a multimodal multi-objective route optimization model which aims to minimize total transportation duration and cost. This study could be used as a reference for decision-maker to transportation plans.

Design/methodology/approach

Monte Carlo (MC) simulation is introduced to deal with transportation uncertainty and the NSGA-II algorithm with an external archival elite retention strategy is designed. An efficient transformation method based on data-drive to overcome the high time-consuming problem brought by MC simulation. Other contribution of this study is developed a scheme risk assessment method for the non-absolutely optimal Pareto frontier solution set obtained by the NSGA-II algorithm.

Findings

Numerical examples verify the effectiveness of the proposed algorithm as it is able to find a high-quality solution and the risk assessment method proposed in this paper can provide support for the route decision.

Originality/value

The impact of timetable on transportation duration is analyzed and making a detailed description in the mathematical model. The uncertain transportation duration and cost are represented by random number that obeys a certain distribution and designed NSGA-II with MC simulation to solve the proposed problem. The data-driven strategy is adopted to reduce the computational time caused by the combination of evolutionary algorithm and MC simulation. The elite retention strategy with external archiving is created to improve the quality of solutions. A risk assessment approach is proposed for the solution scheme and in the numerical simulation experiment.

Details

Engineering Computations, vol. 39 no. 2
Type: Research Article
ISSN: 0264-4401

Keywords

Access Restricted. View access options
Article
Publication date: 15 February 2024

Chun Cheng

This study investigates the direct influence of ambidextrous leadership on employees’ innovation behaviour, the mediating role of innovative self-efficacy and harmonious work…

768

Abstract

Purpose

This study investigates the direct influence of ambidextrous leadership on employees’ innovation behaviour, the mediating role of innovative self-efficacy and harmonious work passion, and the moderating role of Zhong-Yong thinking.

Design/methodology/approach

The authors conducted a series of questionnaire surveys to collect data in three time periods and from multiple sources; 332 supervisor–subordinate matched samples were obtained. The hypothesised relationships were tested using structural equation modelling and ProClin.

Findings

Ambidextrous leadership is positively associated with employees’ innovation behaviour, while innovative self-efficacy and harmonious work passion play mediating roles. The analysis further confirms that innovative self-efficacy and harmonious work passion play a chained double-mediating role between ambidextrous leadership and employees’ innovation behaviour, while Zhong-Yong thinking plays moderating roles between ambidextrous leadership and innovative self-efficacy and between ambidextrous leadership and harmonious work passion.

Originality/value

This study demonstrates the influence of ambidextrous leadership on employees’ innovation behaviour, specifically the role of ambidextrous leadership, and extends the relationship’s theoretical foundation. It is also expected to provide inspiration and serve as a reference for local Chinese management.

Details

Leadership & Organization Development Journal, vol. 45 no. 4
Type: Research Article
ISSN: 0143-7739

Keywords

Available. Open Access. Open Access
Article
Publication date: 10 July 2023

Yong Ding, Peixiong Huang, Hai Liang, Fang Yuan and Huiyong Wang

Recently, deep learning (DL) has been widely applied in various aspects of human endeavors. However, studies have shown that DL models may also be a primary cause of data leakage…

822

Abstract

Purpose

Recently, deep learning (DL) has been widely applied in various aspects of human endeavors. However, studies have shown that DL models may also be a primary cause of data leakage, which raises new data privacy concerns. Membership inference attacks (MIAs) are prominent threats to user privacy from DL model training data, as attackers investigate whether specific data samples exist in the training data of a target model. Therefore, the aim of this study is to develop a method for defending against MIAs and protecting data privacy.

Design/methodology/approach

One possible solution is to propose an MIA defense method that involves adjusting the model’s output by mapping the output to a distribution with equal probability density. This approach effectively preserves the accuracy of classification predictions while simultaneously preventing attackers from identifying the training data.

Findings

Experiments demonstrate that the proposed defense method is effective in reducing the classification accuracy of MIAs to below 50%. Because MIAs are viewed as a binary classification model, the proposed method effectively prevents privacy leakage and improves data privacy protection.

Research limitations/implications

The method is only designed to defend against MIA in black-box classification models.

Originality/value

The proposed MIA defense method is effective and has a low cost. Therefore, the method enables us to protect data privacy without incurring significant additional expenses.

Details

International Journal of Web Information Systems, vol. 19 no. 2
Type: Research Article
ISSN: 1744-0084

Keywords

Access Restricted. View access options
Article
Publication date: 11 December 2017

Junjun Cheng, Yimin Huang and Yong Su

The purpose of this paper is to empirically examine the role of relationality in buyer–supplier negotiations and how it varies across cultural settings.

829

Abstract

Purpose

The purpose of this paper is to empirically examine the role of relationality in buyer–supplier negotiations and how it varies across cultural settings.

Design/methodology/approach

Using a multisession simulation design, this study recruited research participants (n = 82) from diverse cultural backgrounds to play the role of either buyer or supplier for two negotiation tasks. Regression analyses were used to test the relationships among relational constructs as well as the moderating role of relational culture.

Findings

Results show that negotiators’ relational self-construal enhances their relational commitment to the ongoing negotiations, which leads to a higher level of relational capital accumulated at the end of negotiations. The impact of relational self-construal on relational commitment and that of relational commitment on counterparts’ relational capital are stronger for negotiators from a high (as opposed to low) relational cultural background. Furthermore, intercultural negotiation context, when compared with intracultural context, weakens the impact of relational commitment on relational capital.

Originality/value

This research is among the first to empirically examine the culturally varied relationality in negotiations. The findings offer important theoretical and practical implications regarding how relationality, when interacting with cultural factors, has varying impacts on business negotiations.

Details

International Journal of Conflict Management, vol. 29 no. 1
Type: Research Article
ISSN: 1044-4068

Keywords

Access Restricted. View access options
Article
Publication date: 1 July 2006

Yee Kwan Tang

This study aims at providing exploratory insights into the initiative and capabilities of Chinese SMEs to develop and utilize diverse networks to support internationalization…

709

Abstract

This study aims at providing exploratory insights into the initiative and capabilities of Chinese SMEs to develop and utilize diverse networks to support internationalization. Such network development and utilization efforts are fundamental to the analysis and explanation of Chinese firms’ internationalization patterns and outcomes. Extending from the existing network studies in the Chinese context that generally put emphasis on strong‐tie and ethnic‐oriented networks, this paper investigates and explains explicitly the use and effects of both strong‐ and weak‐tie networks in the international development of Chinese SMEs. Indepth case studies on four rapidly internationalized Chinese SMEs are conducted. The case findings demonstrate that weak‐tie networks are essential to the firms’ business development in foreign markets; and were proactively developed and utilized in the course of the firms’ development. The cases also provide alternative perspectives to the beliefs and values underpinning strong‐tie networks presumed in existing literature. The findings draw attention to the changing business values and approaches of the Chinese firms aiming at developing internationally. Managerial implications concerning the significant influence of effective networking on internationalization are pinpointed.

Details

Journal of Asia Business Studies, vol. 1 no. 1
Type: Research Article
ISSN: 1558-7894

Keywords

Access Restricted. View access options
Article
Publication date: 29 April 2014

Linfang Wang, Lijuan Zheng, Cheng yong Wang, Shan Li, Yuexian Song, Lunqiang Zhang and Peng Sun

Compared with the traditional printed circuit board (PCB) drilling process, the technology of drilling IC substrate is facing more problems, such as much smaller hole diameter…

513

Abstract

Purpose

Compared with the traditional printed circuit board (PCB) drilling process, the technology of drilling IC substrate is facing more problems, such as much smaller hole diameter, more intensive hole space, thinner sheet and more complicated materials are drilled in process. Moreover, the base material of IC substrate is different from traditional PCB, more kinds of fillers added in IC substrate which make the drill worn seriously during drilling process. Micro-drills wear and micro holes quality are the most important questions when drilling IC substrate so far. Wear morphology of micro-drill, holes wall roughness and hole location accuracy are researched in this paper. The influence factors of micro-drills wear and micro holes quality are also studied in this drilling process. The paper aims to discuss these issues.

Design/methodology/approach

Two drills with same structure and different diameter are used to drill different stacks of IC substrate and drill different holes in this paper. There are four experiments made and the drilling parameters including spindle speed (n), feed rate (vf) and retraction speed (vr) are recommended by drill manufacturing company. Wear morphologies of drill are observed, holes wall roughness (Rmax) and holes location accuracy (Cpk) are measured in this paper. Analyzing the main factors influence on drill wear, holes wall roughness and holes location accuracy through these experiments.

Findings

The micro-drills of IC substrate wear more severely compared with other material of PCB through the experimental results in this paper. Drill diameter has influence on micro-drill wear when drilling IC substrate, the smaller of drill is, the more severely of micro-drill wears. Drill diameter affect the holes wall roughness too, the holes wall roughness of larger holes is better than smaller one in a certain range. The drilled holes number also has influence on micro-drills wear, holes wall roughness and holes location accuracy. The more drilled holes, the seriously of micro-drills wear, and the worn drill would destroy the hole quality. Therefore, the more drilled holes lead the bad holes wall roughness and holes location accuracy in this paper. In addition, stacks of IC substrate affect much on the holes location accuracy, the more stacks, the worse holes location accuracy.

Originality/value

Chinese Mainland is obviously lagging behind in technology and manufacturer of IC substrate which is incompatible with the nation circumstances. There is few research of drilling IC substrate in China and research data are lacking so far. It is most necessary to improve the technology level of drilling IC substrate in China. In order to reduce the wear of micro-drills and improve the quality of micro-holes, many experimental tests about drilling IC substrate are researched in this paper.

Details

Circuit World, vol. 40 no. 2
Type: Research Article
ISSN: 0305-6120

Keywords

Access Restricted. View access options
Article
Publication date: 29 June 2023

Yingli Li, Chenwei Wu, Yong Peng and Xudong Jiang

In order to investigate the vibration reduction properties of a three-dimensional elastic metastructure with spherical cavities at low frequencies.

98

Abstract

Purpose

In order to investigate the vibration reduction properties of a three-dimensional elastic metastructure with spherical cavities at low frequencies.

Design/methodology/approach

The bandgap characteristics of a three-dimensional elastic metastructure with spherical cavities are studied based on analytical and numerical approaches.

Findings

The results of both method revealed that the vibration of the vertexes masses is important for opening bandgaps. The fact that the big sphere cavity radius or short side length of the cube unit leads to a wider bandgap, is noteworthy.

Originality/value

This research provides theoretical guidance for realizing the vibration attenuation application of EMs in practical engineering.

Details

International Journal of Structural Integrity, vol. 14 no. 4
Type: Research Article
ISSN: 1757-9864

Keywords

Access Restricted. View access options
Article
Publication date: 1 June 1997

Jaroslav Mackerle

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the…

6101

Abstract

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

Details

Engineering Computations, vol. 14 no. 4
Type: Research Article
ISSN: 0264-4401

Keywords

Access Restricted. View access options
Article
Publication date: 19 August 2021

Yong Li, Feifei Han, Xinzhe Zhang, Kai Peng and Li Dang

In this paper, with the goal of reducing the fuel consumption of UAV, the engine performance optimization is studied and on the basis of aircraft/engine integrated control, the…

260

Abstract

Purpose

In this paper, with the goal of reducing the fuel consumption of UAV, the engine performance optimization is studied and on the basis of aircraft/engine integrated control, the minimum fuel consumption optimization method of engine given thrust is proposed. In the case of keeping the given thrust of the engine unchanged, the main fuel flow of the engine without being connected to the afterburner is optimally controlled so as to minimize the fuel consumption.

Design/methodology/approach

In this study, the reference model real-time optimization control method is adopted. The engine reference model uses a nonlinear real-time mathematical model of a certain engine component method. The quasi-Newton method is adopted in the optimization algorithm. According to the optimization variable nozzle area, the turbine drop-pressure ratio corresponding to the optimized nozzle area is calculated, which is superimposed with the difference of the drop-pressure ratio of the conventional control plan and output to the conventional nozzle controller of the engine. The nozzle area is controlled by the conventional nozzle controller.

Findings

The engine real-time minimum fuel consumption optimization control method studied in this study can significantly reduce the engine fuel consumption rate under a given thrust. At the work point, this is a low-altitude large Mach work point, which is relatively close to the edge of the flight envelope. Before turning on the optimization controller, the fuel consumption is 0.8124 kg/s. After turning on the optimization controller, you can see that the fuel supply has decreased by about 4%. At this time, the speed of the high-pressure rotor is about 94% and the temperature after the turbine can remain stable all the time.

Practical implications

The optimal control method of minimum fuel consumption for the given thrust of UAV is proposed in this paper and the optimal control is carried out for the nozzle area of the engine. At the same time, a method is proposed to indirectly control the nozzle area by changing the turbine pressure ratio. The relevant UAV and its power plant designers and developers may consider the results of this study to reach a feasible solution to reduce the fuel consumption of UAV.

Originality/value

Fuel consumption optimization can save fuel consumption during aircraft cruising, increase the economy of commercial aircraft and improve the combat radius of military aircraft. With the increasingly wide application of UAVs in military and civilian fields, the demand for energy-saving and emission reduction will promote the UAV industry to improve the awareness of environmental protection and reduce the cost of UAV use and operation.

Details

Aircraft Engineering and Aerospace Technology, vol. 93 no. 7
Type: Research Article
ISSN: 1748-8842

Keywords

Available. Open Access. Open Access
Article
Publication date: 3 April 2017

Kwang-yong Shin, Fa-quan Ge and Peng-fei Qin

Research about the modern mutually beneficial nonprofit organizations (MBNPOs) has great value because of the increasingly important role that the MBNPO plays in society. The…

4536

Abstract

Purpose

Research about the modern mutually beneficial nonprofit organizations (MBNPOs) has great value because of the increasingly important role that the MBNPO plays in society. The establishment and management of MBNPOs are critical for its development.

Design/methodology/approach

Integrated marketing communications (IMC) theory is applied to the research on establishment and management innovation. The establishment of MBNPOs needs four sequential steps: identifying the target group, providing services to meet the demand of stakeholders, designing appropriate communication tactics and deploying proper organizational structure to accomplish efficient communication.

Findings

Three types of approach enable traditional enterprises to transform into MBNPOs: product innovation, operational innovation and synergetic development. The application of IMC theory accomplishes management innovation of MBNPOs in three aspects: leading market-orientation specific to stakeholder-orientation, making management innovation systematic in MBNPOs and clarifying targets of management innovation in MBNPOs.

Originality/value

This is one of the first examinations of establishment path and management innovation of MBNPO based on IMC theory.

Details

Asia Pacific Journal of Innovation and Entrepreneurship, vol. 11 no. 1
Type: Research Article
ISSN: 2071-1395

Keywords

1 – 10 of 235
Per page
102050