Search results

The purpose of this paper is to apply a negative gate bias stress in order to study instabilities of threshold voltage in N‐channel power vertical double‐diffused metal‐oxide‐semiconductor field effect transistor (VDMOSFET). Variations in gate oxide trapped charge and interface trap densities are also calculated.

A threshold voltage shift is detected; the oxide and interface trap densities were evaluated based on a direct measurement of the gate to source capacitance and conductance.

Results presented show that the threshold voltage is decreasing with stress time, the capacitance and conductance curves are altered by applied stress, also the oxide traps and the interface traps densities are increasing with stress time.

The positive bias stress seems to be more destructive in the case of the studied devices.

The purpose of this paper is to discuss the effect of electric reverse stress currents on the performance of photovoltaic solar modules.

The effect of a reverse introduced current as a function of time is studied on the I‐V and C‐V characteristics and parameters which were extracted and analyzed using numerical analysis based on a reliable double exponential model.

The effect of an introduced reverse current for different periods simulated the effect of accumulated extreme reverse currents which may arise in solar cells and modules due to different reasons, causing dramatic changes in the shunt resistance as well as other characteristics, mainly when the time of the current application exceeded a certain limit.

The paper contributes to the research on the damaging effects of reverse currents on the normal operation of the solar cells and modules.

The time domain BEM/FEM coupling procedure is applied to 2‐D multi‐domain fluid–structure interaction problems. The fluid domain is acoustic and modeled by taking advantage of the BEM scheme that is suitable to either finite or infinite domains. The structure is modeled by elastodynamic finite elements that can be either linear or nonlinear. The input impact, which can be either plane waves or non‐plane waves, can either be forces acting directly on the fluid–structure system or be explosion sources in the fluid. The far field or near field explosion sources, which are difficult to be simulated for finite element analysis, are very easy to be simulated here by boundary element modeling as internal sources. The stability problem is solved by using the linear θ method, which makes the BEM scheme stable. The numerical results are compared with analytical solutions for two examples.

Numerous design methods are available to facilitate digital innovation processes in user interface design. Nonetheless, little guidance exists on their appropriate selection within the design process based on specific situations. Consequently, design novices with limited design knowledge face challenges when determining suitable methods. Thus, this paper aims to support design novices by guiding the situational selection of design methods.

Our research approach includes two phases: i) we adopted a taxonomy development method to identify dimensions of design methods by reviewing 292 potential design methods and interviewing 15 experts; ii) we conducted focus groups with 25 design novices and applied fuzzy-set qualitative comparative analysis to describe the relations between the taxonomy's dimensions.

We developed a novel taxonomy that presents a comprehensive overview of design conditions and their associated design methods in innovation processes. Thus, the taxonomy enables design novices to navigate the complexities of design methods needed to design digital innovation. We also identify configurations of these conditions that support the situational selections of design methods in digital innovation processes of user interface design.

The study’s contribution to the literature lies in the identification of both similarities and differences among design methods, as well as the investigation of sufficient condition configurations within the digital innovation processes of user interface design. The taxonomy helps design novices to navigate the design space by providing an overview of design conditions and the associations between methods and these conditions. By using the developed taxonomy, design novices can narrow down their options when selecting design methods for their specific situations.

Equipment reliability significantly impacts productivity, and in order to obtain high equipment reliability and productivity, maintenance and production decision should be made simultaneously to keep manufacturing system healthy. The purpose of this paper is to investigate the joint optimization of equipment maintenance and production decision for k-out-of-n system equipment with attenuation of product quality and to explore the impact of maintenance on the production and cost control for manufacturers.

A multi-period Markov chain model for k-out-of-n system equipment is set up based on the assumption that the deterioration of equipment is a pure birth process. Then, the maintenance cost, setup cost, inventory holding cost, shortage cost, production cost and the quality cost are analyzed with the uncertain demand and the attenuation of product quality stemmed from equipment deterioration. The total lowest cost per unit time and its specific calculation method are presented. Finally, the robustness and flexibility of the method are verified by a numerical example and the effects of equipment deterioration intensity and attenuation of product quality are analyzed.

The result shows that the joint decision model could not only satisfy the uncertain demand with low cost and strong robustness but also make the output products high quality level. In addition, the attenuation of product quality would influence the equipment maintenance and production decision and leads to the production waste and increases the operation cost greatly.

Implications derived from this study can help production maintenance managers and reliability engineers adequately select maintenance policy to improve the equipment efficiency and productivity with high quality level at a relatively low cost.

This research note aims to present a summary of research concerning economic‐lot scheduling problem (ELSP).

The paper's approach is to review over 100 selected studies published in the last 15 years (1997‐2012), which are then grouped under different research themes.

Five research themes are identified and insights for future studies are reported at the end of this paper.

The motivation of preparing this research note is to summarize key research studies in this field since 1997, when the ELSP problems have been verified as NP‐hard.

ELSP is an important scheduling problem that has been studied since the 1950s. Because of its complexity in delivering a feasible analytical closed form solution, many studies in the last two decades employed heuristic algorithms in order to come up with good and acceptable solutions. As a consequence, the solution approaches are quite diversified. The major contribution of this paper is to provide researchers who are interested in this area with a quick reference guide on the reviewed studies.

With the arrival of the big data era, governments have appointed a chief data officer (CDO) to meet the opportunities and challenges brought by big data. The existing research on the CDOs is very limited, and what does exist focuses primarily on what are CDOs do. Little research has explored how CDOs do. To fill this gap, this study employed ambidexterity theory to investigate the ambidexterity of CDOs’ impact on data-driven innovation.

To empirically test the model, a survey study was conducted to empirically test the model. Data were collected from 261 CDOs in government and government employees in big data management centers or bureaus. The collected data were analyzed quantitatively to answer hypotheses using a structural equation model.

The findings suggest that data exploitation and data exploration significantly influence data-driven leadership, culture and value propositions. Data-driven leadership and value propositions significantly impact government performance.

This study is one of the first attempts to investigate how CDOs work, especially when promoting data-driven innovation. In addition, this study extends ambidexterity theory into the issue of the CDO in government.

The use of flexible connections throughout the steel structures provides a high level of stiffness compared to that of fully welded connections. Flexible connections allow for rotation to an extent, which make them perform better during earthquake than welded connections. In hanger connections, the applied load produces tension in the bolts and bolts are designed for tensile forces. When the deformation of the flange plate is equal to that of the bolts, a plastic hinge is formed in the flange plate at the weld line and the bolts are pulled to failure. If the attached plate is allowed to deform, additional tensile forces called prying forces are developed in the bolts. The paper aims to discuss these issues.

This paper includes the results of investigation on prying force in T-stub connection fabricated with normal grade bolts and high strength friction grip (HSFG) bolts. Finite element analysis has been carried out by creating models and analyzing the effect of external tensile force and bolt force. For different grades of bolt (4.6, 8.8, 10.9, 12.9), the prying force is calculated.

It is found that prying force is increasing with the change in grade of bolt used from normal to HSFG. The results obtained from analysis using IS 800:2007 codal provision are also included. It is observed that HSFG bolts do not allow for any slip between the elements connected and hence rigidity is increased.

The prying force mainly depends on geometrical parameter of the connection. In this research work, the variation of prying force was studied based on the variation in dimensions of T-stub angle section and bolt grade (4.6, 8.8, 10.9, 12.9). The method of obtaining prying force from bolt load and applied load is a unique approach. The results of FE analysis is validated with the analytical calculation as per IS 800:2007 code provisions, which shows the originality of the research.

The purpose of this paper is to investigate a supply chain consisting of a producer and multiple suppliers of a type of component needed for the production of a certain product. The effects of carbon emission taxes, quality of components and human inspection errors as well as the collaboration among the supply chain members are considered.

A mathematical model is formulated for a non-collaborative supply chain, and the optimal policy is shown to be the solution of a constraint optimization problem. The mathematical model is modified to the case of a collaborative supply chain and to account for inspection errors. Algorithms are provided, and a numerical example is given to illustrate the determination of the optimal policy.

This study offers a new conceptual and analytical model that analyzes the production problem from a supply chain perspective. Human resource management practices and environmental aspects were incorporated into the model to reduce risk, optimally select the suppliers and properly maximize profit by accounting for human inspection error as well carbon emission taxes. Algorithms describing the determination of the optimal policy are provided.

This study provides practical results that can be useful to researchers and managers aiming at designing sustainable supply chains that incorporate economic, environmental and human factors.

This study can be useful to researchers and managers aiming for designing sustainable supply chains that incorporate economic and human factors.