Search results

The purpose of this study is to successfully apply ultrasonic waves for the quick extraction of flax seed gum from flaxseed hull or whole seed and compare it to the standard technique of extraction.

The effect of the heating source, extracted time, temperature and pH of extracted solution on the extraction was studied. The obtained gum is subsequently used for silk screen printing on cotton, linen and viscous fabrics. Rheological properties and viscosity of the printing paste were scrutinized in the current study to get a better insight into this important polysaccharide. The output of this effort aimed to specify the parameters of the processes for printing textiles to serve in women’s fashion clothes by applying innovated handmade combinations of Islamic art motives using a quick and affordable method. Seven designs are executed, and inspiring from them, seven fashion designs of ladies’ clothes were designed virtually by Clo 3D software.

The result recorded that the new gum has excellent printing properties. In addition, they have better rheological properties, viscosity, chromatic strength and fastness qualities, all of which could help them in commercial production.

Flaxseed and three different fabric types (Cotton, Linen and Viscous) were used.

Synthesis of a new biodegradable thickener from a natural resource, namely, flaxseed, by applying new technology to save time, water and energy.

Synthesis of eco-friendly biodegradable thickener and used in textile printing alternative to the synthetic thickener.

Due to herbs and plants’ therapeutic properties and simplicity of availability in nature, humans have used them to treat a variety of maladies and diseases since ancient times. Later, as technology advanced, these plants and herbs gained significant relevance in some industries due to their suitable chemical composition, abundant availability and ease of access. Aegle marmelos is a species of plant that may be found in nature. Yet, little or very little literature was located on the coloration behavior of this plant’s leaves. This study aims to focus on the effect of different parameters on the extraction of colorant from Aegle marmelos leaves.

Some factors that affected on the extraction processes were examined and found to have significant impacts on the textile dyeing such as the initial dye concentration, extracted temperature, extracted bath pH and extracted time were all changed to see how they affected color extraction. The authors report a direct comparison between three heating methods, namely, microwave irradiation (MWI), ultrasonic waves (USW) and conventional heating (CH). The two kinetic models have been designed (pseudo-first and pseudo-second orders) in the context of these experiments to investigate the mechanism of the dyeing processes for fabrics under study. Also, the experimental data were analyzed according to the Langmuir and Freundlich isotherms.

From the result, it was discovered these characteristics were found to have a substantial effect on extraction efficiency. Temperature 90°C and 80°C when using CH and USW, respectively, while at 90% watt when using MWI, period 120 min when using CH as well as USW waves, while 40 min when using MWI, and pH 4, 5 and 10 for polyamide, wool and cotton, respectively, were the optimal extraction conditions. Also, the authors can say that wool gives a higher absorption than the other fabric. Additionally, MWI provided the best color strength (K/S) value, and homogeneity, at low temperatures reducing the energy and time consumed. The coloring follows the order: MWI > USW > CH. The adsorption isotherm of wool could be well fitted by Freundlich isotherm when applying CH and USW as a heating source, while it is well fitted by the Langmuir equation in the case of MWI. In the study, it was observed that the pseudo-first-order kinetic model fits better the experimental results of CH with a constant rate K₁ = −0.000171417 mg/g.min, while the pseudo-second-order kinetic model fits better the experimental results of absorption of both MWI (K2 = 38.14022572 mg/g.min) and USW (K₂ = 12.45343554 mg/g.min).

There is no research limitation for this work. Dye was extracted from Aegle marmelos leaves by applying three different heating sources (MWI, ultrasonic waves [USWW] and CH).

This work has practical applications for the textile industry. It is concluded that using Aegle marmelose leaves can be a possible alternative to extract dye from natural resource by applying new technology to save energy and time and can make the process greener.

Socially, it has a good impact on the ecosystem and global community because the extracted dye does not contain any carcinogenic materials.

The work is original and contains value-added products for the textile industry and other confederate fields.

This study aims to provide an efficient nanocomposite that might be used to protect deteriorated archaeological stucco.

The current experimental study evaluates the effectiveness of the hydroxyapatite nanoparticles (HA NPs) added to graphite carbon nitride (g-C₃N₄) and mixed with Paraloid (B-72) (B-44) in acetone in consolidating samples. The physicochemical properties of the as-prepared nanopowders have been investigated using Fourier transform infrared (FT-IR). This study involves monitoring the transmission electron microscope (TEM), X-ray diffraction (XRD) and Fourier transform changes in consolidated samples after exposure to various conditions by using the digital microscope and scanning electron microscopy to identify the appearance of the consolidated stucco samples after applying the selected nanocomposites and after their artificial aging procedures. Color change is measured using a colorimeter, and comparisons are made between samples before and after aging. Physical and mechanical properties are determined, and the contact angle is measured to measure hydrophobicity rate.

The obtained results indicate that HA/g-C₃N₄ hybrid nanocomposites with a composition of HA 0.5%/g-C₃N₄ 1%/B-72 3% and HA 0.5%/g-C3N4 1%/B-44 3% achieved the best consolidating results among the proposed mixtures for stucco samples, where the percentage of weight loss was 0.77 with B-72, 0.53 with B-44. Surface identification and characterization of hydroxyapatite HA NPs/g-C₃N₄ hybrid nanocomposites embedded in B72/B44matrix were carried out using Scanning Electron Microscopy coupled with energy-dispersive x-ray spectroscopy (SEM–EDX).

This study provides important findings from the analytical procedures used to evaluate the consolidation materials used in this study. The findings are beneficial for the preservation of archaeological stucco. The investigation findings revealed that the most favorable outcomes were obtained from HA/g-C₃N₄ hybrid nanocomposites containing HA 0.5%, g-C₃N₄ 1% and B-72 3%, as well as HA 0.5%, g-C₃N₄ 1% and B-44 3%. Consequently, it is advised to use this nanocomposite to consolidate archaeological stucco, thus establishing a promising initial stride toward conserving archaeological stucco for future research endeavors. This study introduces a new nanocomposite material (HA NPs/G-C₃N₄) that can be used to protect and improve archaeological plaster. This is very important for preserving cultural heritage. The incorporation of nanotechnology improves the material’s physical and mechanical qualities. The research uses various characterization techniques (including TEM, XRD and FT-IR) to meticulously analyze the physicochemical properties of the nanocomposite material and assess its efficacy in practical applications through artificial aging experiments, offering novel insights and methodologies for future cultural relic preservation studies.

The purpose of this paper is to examine information technology and information systems (IT/IS) technology teaching and learning (T&L) as affected by three key factors of tacit knowledge (TK). These factors are the de-contextualization, the faculty and students’ mental model gap and the intrinsic inability of faculty to teach what they know (i.e. the know-how-know what gap).

The approach is based on intensive literature review and synthesis of Nonaka’s socialization, externalization, combination and internalization model and other relevant knowledge management (KM) principles applied to understand the effects of mobilization and nurturing of TK in pedagogical activities and strategies.

This paper demonstrated a holistic view of the role of TK in teaching IT/IS through deep learning activities. It differentiates between faculty and student mental models and the ability of the faculty to convey real-world know-how to students.

This study is by no means comprehensive in exploring the TK contextual dimensions of IT/IS T&L milieus. However, some of the assumptions and factors in this paper are not pertinent to some pedagogical environments.

The activities in this paper introduced new propositions on IT/IS teaching by focusing on TK concepts in light of its challenges. The study could be used by institutes to place emphasis on accommodating TK within effective IT/IS T&L activities.

Drawing on the KM literature and experience, this paper offers new insight into how TK can be innovatively incorporated into a pedagogical landscape.

Sex and age estimation is important, particularly when information about the deceased is unavailable. There are limited radiological studies investigating side, sex and age differences in normal ankle morphometric parameters. The authors’ goal was to evaluate different ankle joint morphometric measurements and document variations among Egyptians.

A prospective study was conducted throughout 23 months on 203 (100 males and 103 females) adult Egyptians, aged between 20-69 years old, who were referred for a plain x-ray of bilateral normal ankle joints.

Ankle parameters showed no statistical difference between both sides, except for tarsal width (TaW) which was significantly higher on right than left side (26.92 ± 2.66 vs 26.18 ± 2.65 mm). Males showed significantly higher morphometric values except for anteroposterior gap (APG) and talus height (TaH) which were significantly higher in females (2.29 ± 0.80 vs 1.80 ± 0.61 mm and 13.01 ± 1.68 vs 11.87 ± 1.91 mm, respectively). There was significant increase in tibial arc length, APG, distance of level of MTiTh from anterior limit of mortise, distance of level of MTiTh from vertex of mortise, sagittal distance between tibial and talar vertices and sagittal radius of trochlea tali arc in old age group compared to young one. A significant decrease in tibial width, malleolar width, TaW and TaH was noted in old age group compared to young one.

Ankle joints of both sides are mostly symmetrical; however, there are significant differences in most morphometric values due to sex and age factors. These findings may be essential during side, sex and age determination.

The main problem addressed by this research is the current debate between the negative and positive effects of industrial clusters. This debate is a result of gaps between theoretical implications and empirical evidence in both the classical agglomeration theory and the agglomeration lifecycle theory. The purpose of this study is to propose a framework for developing an index measuring both organizational cluster involvement and organizational supply chain including the three pillars (economic, social, and environmental). Furthermore, the index acts as a quantitative predictor of the stages of the life cycle of industrial clusters. Adopting a case study methodology, the applicability of the index development framework is demonstrated. First, cross-sectional exploratory interviews are performed to locate items measuring the three pillars of organizational sustainability within Egyptian communication industry. Second, an explanatory, cross-sectional approach is applied gathering data from eight professionals related to involvement and supply chain sustainability of their organizations. Analytical hierarchical process is used for weighting and aggregating individual item metrics into two indicators (Saaty, 1980). Measuring, managing, and controlling capabilities of organization's supply chains outweighs the need to manage risks. The proposed framework aids firms within a cluster in making timely decisions about what needs addressing to improve supply chain sustainability performance. Hence, all environmental, social, and economic capabilities can be effectively monitored and controlled.

This study aims to evaluate the nutrient content and acceptable qualities of plant-based burger patties (PBBP) formulated with chickpea flour, defatted sesame cake (DSC) flour, coffee silver skin and pomegranate juice as colorant.

The chemical composition, energy value, cholesterol content, amino acid composition, cooking loss, pH, color characteristics and sensory attributes of PBBP were analyzed using official procedures and compared to beef burger. 

PBBP had a protein value of 16.0 g/100g, which is nearly close to the protein content of the beef burger (18.1 g/100g). The fat content of the PBBP was approximately three times lower than that of the beef burger. The fiber content in PBBP was approximately 23 times as high as that in beef burgers samples (p = 0.05). The raw PBBP samples supplies 178 Kcal/100g, whereas beef burger possessed 259 Kcal/100g. Neither the raw nor the cooked PBBP samples contained any cholesterol. Both the beef and PBBP displayed acceptability scores higher than 7.0, which suggests that PBBP was well accepted.

It is concluded that the PBBP sample exhibited a protein value of 16.0 g/100g, which is comparable to the protein level of beef burgers (18.1 g/100g). The fat level of the PBBP samples was significantly lower than that of the beef burger samples. Uncooked PBBP samples contained significantly higher fiber content compared to beef burger samples. No cholesterol was found in raw or cooked PBBP samples. Overall acceptance scores for both beef and PBBP samples exceeded 7.0, suggesting that the proposed product (PBBP) was received favorably.

This study aims to assess the oxidative stability of avocado oil (AO) at various temperatures, using butylated hydroxytoluene (BHT) as an artificial antioxidant and different concentrations of ultrasonic extract of Chlorella vulgaris.

Extracts of C. vulgaris were obtained using four solvents: water, acetone, ethanol and 80% ethanol-aqueous. Standard techniques were used to conduct qualitative phytochemical screening of the extracts. The extracted samples were analyzed for total phenolics, total flavonoids, antioxidant activity and phenolic compound fractionation. Some physicochemical parameters of AO treated with various concentrations of C. vulgaris ultrasonic extract compared to a 200 ppm BHT and exposed to different temperatures were measured.

The highest phenolic, flavonoids content and antioxidant activity was achieved by 80% ethanolic extract of C. vulgaris . The results showed that exposure of AO to high temperatures led to significant changes in the oil's physicochemical properties. These changes increased as the temperature increased. On the other hand, adding 80% ethanolic extract of C. vulgaris into AO reduced the effect of heat treatment on the change in physicochemical properties.

Adding 80% ethanolic extract of C. vulgaris into AO can potentially reduce the impact of heat treatment on the alteration of physicochemical properties.

The purpose of this paper is to contribute to the existing disclosure literature by examining the determinants of corporate risk disclosure (CRD) in the internet reporting for a sample of Egyptian listed companies on the Egyptian Stock Exchange (EGX).

This study depends on a sample of 76 Egyptian companies included in the EGX 100 in the period 2012-2014. The study applies a content analysis and uses a sentence-based method to measure CRD in the internet reporting. Ordinary least-squares regression analysis is used to examine the impact of firm and board characteristics on CRD in the internet reporting.

The empirical analysis shows that large Egyptian companies tend to disclose more risk information in their internet reporting. Moreover, the results indicate that there is a significant positive association between sector type and CRD in the internet reporting. The results show non-significant association between CRD and other firm characteristics (cross listing and level of risk). Finally, there are no significant associations between CRD and board characteristics variables (board size, board composition and CEO duality).

The study’s findings have practical implications. It aids in informing policy makers considering implementing new economic reform programs about the properties of Egyptian companies that disclose risk information in their internet reporting. It provides insights on CRD in Egyptian companies for standards setters and professional authorities to improve risk reporting practices to help stakeholders in making good decisions.

This study is one of the first studies to examine the determinants of CRD in the internet reporting for a sample of Egyptian companies.