Search results

The purpose of this paper is to analyse the static performance characteristics of lobe journal bearings lubricated with a micropolar fluid, considering effect of non‐circularity. Number of lobes and their preload value are the non‐circularity parameters considered in the present study. The bearings undertaken for the investigation are two, three and four‐lobe symmetric journal bearings with finite width.

For this purpose, modified form of Reynolds equation is derived, based on Eringen's micropolar fluid theory and it is solved numerically using finite element method (FEM). The effect of the non‐circularity parameters of bearings on the steady‐state performance characteristics such as load carrying capacity, attitude angle, coefficient of friction and side leakage flow are presented and discussed.

The results show that the number of lobes and their preload value can influence the performance of lobe bearings. It is seen that, in order to provide certain improvement over simple cylindrical bearings, the non‐circularity parameters of lobe bearings must be chosen correctly. There is no single optimum profile for multi‐lobe bearing application.

Lobe bearings, compared with simple circular bearings, offer several geometric parameters to designers. These parameters must be chosen correctly, so that the requirements of a specific application can be fulfilled.

This paper aims to evaluate the theoretical performance of elliptical dam bearing (EDB). The objective of this paper is to study the influence of eccentricity ratio, dam parameters and micropolarity parameters on the stability of EDB with respect to micropolar lubrication.

In this study, the modified Reynolds’ equation for dynamic state is solved using the finite element method and Galerkin technique. A MATLAB code is written to compute pressure and stability and also to analyse the characteristics. The stability parameters of an EDB are computed for selected values of eccentricity ratios at four levels in the range of 0.20 to 0.35 and for length-diameter ratio of 2.0.

The results from stability analysis reveal that micropolar lubricated EDB provides better stability at smaller material length due to increased effective viscosity. Hence, it is better to select the smaller characteristic length and higher dam width to achieve optimum performance of these bearings.

Very few researchers investigated the effects of working eccentricity, bearing dam and micropolar fluid parameters on the EDB in the past. It is important to study these aspects for optimum performance of bearings.

This study aims to investigate the stability performance of partial journal bearings of 120° and 180° partial angles with micropolar lubricant.

To investigate the stability characteristics of partial journal bearing, a MATLAB source code is written. To solve the Reynolds’ equation, the finite element method is used. Stability performances of 120° and 180° partial journal bearings are computed for a wide range of non-dimensional micropolar fluid parameters and working eccentricities.

The presented results provide design data for stability parameters in terms of equivalent stiffness, whirl frequency ratio, critical mass and threshold speed of the rotor with respect to eccentricities and material size of the lubricant. The stability of 180° partial journal bearing is found to be higher than 120° partial journal bearing.

In open literature, it is rare to find the stability of a partial journal bearing lubricated with micropolar fluid. Very few researchers have studied the combined effect of eccentricities and micropolar lubricant parameters on the dynamic performance of such bearings. Hence, it is important to study the dynamic stability to explore the complete investigation of the performance of partial journal bearings with micropolar fluid.

The purpose of this paper is to study tilt angle effects as design parameters of noncircular bearings, on the linear dynamic analyses of micropolar lubricated circular, two, three and four lobe journal bearings.

Reynolds equation in dynamic state is modified considering the micropolarity characteristics of lubricant, and it is solved using generalized differential quadrature method. The perturbed components of the dynamic pressure are extracted based on the linear dynamic model. To explain the transient state of the governing equation, through the linear dynamic approach, the whirling motion of rotor around the steady state position is assumed to be harmonic.

It is observed from the results that tilt angle has significant effects on the steady state and stability performance of lobed journal bearings. It may be selected suitably to improve the performance of rotor-bearing system, while all other lubricant properties and noncircular bearing design parameters are kept fixed. Results show that among the three types of bearings considered, the dynamic performance of two lobe bearings are more affected by the variation of tilt angle.

The present study is mainly concerned with the effects of tilt angle as a design parameter on the stability performance of a hydrodynamic noncircular journal bearing lubricated with micropolar fluid.

The aim of the present paper is to study the combined influence of textured surface and micropolar lubricant behaviour on the performance of two-lobe hole-entry hybrid journal bearing system. The bearing performance parameters of the textured circular/two-lobe hole-entry hybrid journal bearing system have been computed against the constant vertical external load supported by the bearing.

In this work, Eringen’s micropolar fluid theory has been used to derive the governing Reynolds equation. The consequent solution of the governing Reynolds equation has been obtained by using finite element method (FEM) numerical technique.

The present study indicates that the use of the textured surface, two-lobe profile of bearing and micropolar lubricant, significantly enhances the bearing performance as compared to non-textured circular journal bearing.

The present study concerning the influence of surface texturing on the behaviour of the two-lobe hole-entry hybrid journal bearing lubricated with micropolar lubricant is original. The theoretically simulated results of the present study will be useful to design an efficient journal bearing system.

The purpose of this study is to examine the thermo-hydrodynamic performance of tilted non-circular journal bearings lubricated with a micropolar fluid. The investigated bearing types are two- and three-lobe journal bearings with finite length.

For this purpose, modified Reynolds, energy and three-dimensional Laplace equations are solved numerically by using generalized differential quadrature method. The effects of micropolarity characteristics of lubricants, such as characteristic length and coupling number, as well as tilt angle as a design parameter, on the performance of non-circular two- and three-lobe journal bearings are studied.

The results show that the tilt angle can affect the temperature and pressure profiles causing variation in the performance of non-circular bearings. Increasing coupling number and decreasing characteristic length cause the load-carrying capacity to decrease because of the increase in maximum oil temperature of the fluid film of lubricant and decrease in the minimum oil base viscosity. So, it is possible to select suitable values of tilt angle for achieving optimum performance of these bearings.

The non-circular bearings suggest several design parameters such as tilt angle for designers. By considering thermal effects for micropolar lubricant, the requirements of a specific application can be fulfilled.

Hybrid journal bearing have long been used in machines requiring large load and high speed capacity operating under wide range of temperatures. Different compensating devices are used in for efficient operation of bearings. This paper aims to help in selection of optimum compensating device by evaluating the comparative performance of constant flow valve, capillary compensated and slot entry hybrid journal bearing under the combined influence of thermal effects and micropolar nature of lubricant.

The variation in micropolar parameters and viscosity change due to temperature increase of lubricant are considered in present study. Finite element method is used for combined iterative solution of micropolar Reynolds, energy and conduction equations. Micropolar lubricant is assumed to be governed by two parameters, coupling number and characteristic length. The results in the study are presented for symmetric and asymmetric configurations of hole entry and slot entry non-recessed hybrid journal bearings

The results indicate that constant flow valve compensated hole entry hybrid journal bearing is the highest performing bearing for the given range of micropolar parameters of lubricant in terms of maximum fluid pressure and dynamic coefficients.

The performance variations of various configurations of hybrid journal bearing are presented in a single paper. The reader can get overview of combined effects of micropolar parameters and viscosity decrease due to temperature increase of the lubricant.

The purpose of this paper is to present the effect of the preload on the static characteristics of three-lobe bearings lubricated with a fluid blended with high polymer additives modeled as a couple stress fluid.

Based on the micro-continuum theory, the modified Reynolds equation for couple stress fluids is solved using a finite difference method to obtain the distribution of the pressure, the load-carrying capacity, the attitude angle, the friction coefficient and the side leakage for various values of the couple stress parameter and the preload factor.

The results show that the presence of a couple stress in the lubricants improves the static characteristics of this type of bearing compared to those lubricated with Newtonian fluids for any value of the preload factor. Thus, it is found that the preload significantly affects the performance of the three-lobe journal bearing lubricated with a couple stress fluid or a Newtonian fluid. Moreover, the investigation showed that increasing the preload factor exhibits an increase in the load carrying capacity and the attitude angle, but it decreases the friction coefficient and the side leakage especially at a lower preload factor. Furthermore, using a couple stress fluid and a higher preload factor led to a significant rise in the load carrying capacity and a significant reduction in the friction coefficient.

This study helped improve the performance characteristics of the three-lobe journal bearing.

The presence of couple stress in the lubricants improves the static characteristics of this type of bearing compared to those lubricated with Newtonian fluids for any value of the preload factor. The usage of the couple stress fluid and the higher preload factor led to a significant rise in the load carrying capacity and a significant reduction in the friction coefficient.

Shadegan County as a wetland area was selected because of its susceptibility to flooding hazards and inundation. The purpose of this paper is to analyze flooding hazard based on the analytical hierarchy process methodology.

The eight influencing factors (slope, distance from wetland, distance from river, drainage density, elevation, curve number, population density and vegetation density) were considered for flood mapping within the Shadegan County using analytical hierarchical process, geographical information system and remote sensing. The validation of the map was conducted based on the comparison of the historical flood inundation of April 21, 2019.

The results showed that around 32.65% of the area was under high to very high hazard zones, whereas 44.60% accounted for moderate and 22.75% for very low to the low probability of flooding. The distance from Shadegan Wetland has been gained high value and most of the hazardous areas located around this wetland. Finally, the observed flood density in the different susceptibility zones for the very high, high, moderate, low and very low susceptible zones were 0.35, 0.22, 0.15, 0.19, and 0.14, respectively.

To the best of the authors’ knowledge, the flood susceptibility map developed here is one of the first studies in a built wetland area which is affected by anthropogenic factors. The flood zonation map along with management and restoration of wetland can be best approaches to reduce the impacts of floods.

Noncircular journal bearings are used in industry because of their simplicity, efficiency and low cost. During the life time of a machine, these are required to be operated over a number of years and are submitted to several stops and starts. As a result, the bush becomes progressively worn out and the bearing performance changes. The purpose of this paper is to study theoretically the influence of wear on the performance of a non‐circular 2‐lobe four‐pocket multirecess hybrid journal bearing system.

The Reynolds equation governing the flow of lubricant in the clearance space of a non‐circular 2‐lobe multirecess worn hybrid journal bearing system has been solved using FEM along with appropriate boundary conditions. The defects caused by wear are centered on the load line and range from 10 per cent to 50 per cent of the bearing radial clearance.

The numerically simulated results based on a Newtonian lubricant and the steady state flow field system have been presented in terms of maximum fluid film pressure, minimum fluid film thickness, lubricant flow rate, direct fluid film stiffness and damping coefficients and stability threshold speed margin. The paper demonstrates that, for the bearing configurations studied, the bearing behavior is clearly affected by wear. The numerically simulated results indicate that for an offset factor of δ=1.2, the value of h¯_min reduces by 21.21 per cent at δ¯_w=0.5.

The presented results have valuable data in case of 2‐lobe four pocket hybrid journal bearing compensated with constant flow valve restrictor. The paper outcomes are sure to be of interest for researchers and useful for bearing designers.