Search results

The purpose of this study is to process the wettability surface of the ZrO₂ ceramics to improve their surface friction performance.

Microtexture was processed on the surface of ZrO₂ ceramics using a femtosecond laser. The three-dimensional texture morphology, surface contact angle, friction curve and wear morphology were measured by the laser confocal microscope, the contact angle meter, the reciprocating friction and wear tester and the scanning electron microscope, respectively. Based on Wenzel and partial impalement models, a geometric model of micro pits is established to study the influence mechanism of micro pit depth, diameter and distribution density on wettability and to analyze the relationship between surface wettability and tribological properties.

The results show that changing the geometric characteristics of the texture will lead to a change in the solid-liquid contact mode, and then lead to a change of in the surface contact angle. Wettability is an essential factor that affects the reduction of surface friction. The construction of a reasonable texture can enhance the surface hydrophilicity, which is conducive to the formation of a lubricating film on the ceramic surface, thereby reducing abrasive and adhesive wear, and improving the wear resistance of the ZrO₂ ceramic surface.

The results provide a theoretical reference for femtosecond laser surface texture wettability regulation and tribological performance improvement.

This paper aims to design and optimize the threaded fastener of leakage current particulate matter (PM) sensor. The corresponding air-tight test is conducted to ensure the reliability of the installation strategy with screw connection.

Research on the pressure-deformation curve of seal gasket was conducted and the vibration load of engine was considered for the calculation of the minimum installation pre-tightening force. Simultaneously, the danger threaded section area was calculated, and the carrying capacity was verified. The height of the welding line was studied to ensure the reliability of the application. FEA was carried out to acquire the relationship between local structure size and local stress for continuous improvement of thread connection. The installation torque range was acquired from the torque control principle for the pre-tightening force. The sealing reliability of the connector was proved with leakage.

The air tightness of the thread connector is proved to be fine. When the pre-tightening force is over 8,000 N, and its length reaches 2 mm, the connector has good reliability at ambient temperature. The tightening torque of 60-74 Nm can guarantee the reliable fixing ability of thread connector, and its plastic non-deformation ability in the process of repeated tearing down.

This paper provides an installation strategy and an optimization of PM sensor, which has a positive effect on the study and the manufacture of PM sensor. It is helpful to further develop PM sensor and after-treatment technology. This kind of real-time monitoring PM sensor needs to be studied further to achieve its commercial application.

Drawing on Lefebvre’s theorization of rhythm, this chapter presents and discusses rhythmanalysis as a philosophical orientation and as an experimental methodology for social, cultural, and historical research. In particular, it innovatively deploys rhythmanalysis to explore and investigate the everyday life of the contemporary university. To this end it, critically reviews the methods (and findings) of a pilot project that aimed to capture the rhythmic nature of the quotidian activities of staff and students at a “modern” university in the West Midlands of England (2017–2018). The novel combination of research methods employed, comprising audio-visually recorded walking interviews, time-lapse photography of three campuses, and of classroom/laboratory/studio teaching sessions, is examined to reveal the affordances of rhythmanalysis qua experimental methodology. The concluding section offers a reflection on the intellectual and practical purchase of the rhythmanalytical project while suggesting the possibility to further develop these innovative methods in order to refine current analyses and understandings of the contemporary university.

This article aims to review the latest management developments across the globe and pinpoint practical implications from cutting‐edge research and case studies.

The briefing is prepared by an independent writer who adds their own impartial comments, and places the article in context.

The paper finds that the observation that someone is a natural‐born leader can sometimes be taken a face value; at others, it can have a pejorative ring to it.

The article provides strategic insights and practical thinking that have influenced some of the world's leading organizations.

The briefing saves busy executives and researchers hours of reading time by selecting only the very best, most pertinent information and presenting it in a condensed and easy‐to‐digest format.

The purpose of this paper is to explore how to meaningfully engage small‐ to medium‐sized enterprises (SMEs) in strategies that improve the social and environmental sustainability of their businesses.

This paper is a conceptual review of the business case for sustainable development that has been offered to the business world. The paper describes the unique features of SMEs that indicate the need to reframe the case for socially and environmentally sustainable business practices for SMEs, and, using arguments discussed in the literature, we summarize the business case for sustainable development that has been specified for SMEs.

SMEs need particular attention when it comes to business strategies for sustainable development, since the business case is not the same as for large firms. Furthermore, tools that are developed to support sustainability in SMEs need to recognize that these companies have different resources and profiles than larger firms.

Sustainable development as a concept captures most issues facing our societies, which means there are endless possibilities for companies to find strategies that will impact – and hopefully improve – their social and environmental performance. While this paper does not provide empirical evidence and support, it offers some insights on practical and social implications of SMEs engaging in sustainability.

This overview may help and give ideas to owners and managers of SMEs to rethink their overall business strategy by not only incorporating sustainability in their core values and actions but also implementing such strategy. In fact, this diversity of opportunities is where there is hope for turning the current world trajectory towards healthy and resilient human and natural communities.

This paper provides review of the current debates and opportunities in business strategies for sustainable development, and an application to the realities of business operations for SMEs.

This study aims to present an optical alignment and compensation control of die bonder for chips containing through-silicon vias and develop three-dimensional integrated circuit stacked packaging for compact size and multifunction.

The machine vision, optical alignment method and sub-pixel technology in dynamic imaging condition are used. Through a comparison of reference image, the chip alignment calibration can improve machine accuracy and stability.

According to the experimental data and preliminary results of the analysis, accuracy can be achieved within the desired range, and the accuracy is much better than traditional die bonder equipment. The results help further research in die bonder for chips containing through-silicon vias.

In subsequent testing of the chip, the machine can simultaneously test multiple chips to save test time and increase productivity.

The author, with the help of a conceptual and integrated review of inter-firm collaborative strategies literature, developed an integrated perspective framework regarding inter-firm collaborative business strategies (IFCBS). The purpose of this study is to attain a holistic comprehension regarding IFCBS.

The author undertook a conceptual integrated literature review to arrive at the integrated framework on IFCBS. Argumentative and incremental logic was applied to develop the integrated perspective. This is as advocated by scholars (Barney, 2018; Whetten, 1989; Bacharach, 1989; Weick, 1989; Smithey Fulmer, 2012; Cornelissen, 2017, 2019).

This work contributed to theory by conceptualizing an integrated perspective framework. The integrated framework regarding inter-firm collaborative strategy was developed based upon the six conceptual elemental questions proposed and discussed in the papers. These were drawn from extant literature developed from the theoretical aspects regarding various aspects of participation between collaborating firms. It was also based upon the dominant and dormant roles played by the partnering firms as well as the objectives of the partnership. The six conceptual elemental questions were as follows: “Why to cooperate?”; “When to cooperate?”; “Which partners to collaborate with?”; “Where to cooperate?”; “How to cooperate?”; and “What are the benefits of collaboration?”

There was contribution of this conceptual theoretical work in a couple of ways. First, IFCBS have been conceptualized with a reductionist point of view into six conceptual elemental blocks. These acted as antecedent, mediating and dependent factors. Second, an integrated framework on IFCBS was developed.

This work would help strategy managers to secure a holistic understanding regarding planning and execution of inter-firm collaborative strategies. The conceptual elements indicated in the study would help managers assess the factors regarding which managers should focus on with priority. Further, the factors that might hinder post-collaboration success have also been conceptualized in this work for easy comprehension of the managers. The framework proposed would help managers to comprehend regarding what type of inter-firm collaborative strategy their firm should embark upon so that there would be maximum post-collaboration success. The type of inter-firm collaborative strategies to be followed would be dependent upon the dominance or dormancy of the collaborating partners regarding the conceptual elements as well as the goals to be attained and secured from the inter-firm collaborative strategies.

This is one of the first theoretical works toward establishment of an integrated perspective framework on IFCBS involving antecedent, mediating and dependent factors.

This paper has a threefold purpose. First, we offer a literature review on alliance capability based on strategic and competence-based management literature. Second, we extend existing literature on alliance capability by breaking this concept down into five subcapabilities, each of which is linked to a stage of the alliance life cycle. Finally, we suggest how firms can support these capabilities through structural, technological, and people-related tools and techniques. We argue that current literature has focused mainly on organization-wide characteristics, the general alliance function, and alliance experience to explain the level of alliance capability. Although we acknowledge the importance of these elements, we stress that more attention needs to be given to the various stage-specific components, actions, and supportive mechanisms that can result in an improved alliance capability.

Researchers in the past have used Fourier transformation method to determine the in‐plane displacement components from moiré fringes generated by a pair of overlapping circular gratings. In this approach it is necessary to assume that the transmittance is sinusoidal. The purpose of this paper is to propose a graphical method for determining the 2D displacement components from the moiré patterns more easily instead of the complex Fourier transformation method.

The moiré patterns were spatially transformed from Cartesian‐to‐polar coordinate system. The morphological grayscale dilation operation was used to eliminate the residual gratings in the transformed pattern while preserving the moiré fringes. The center line of the moiré fringe was fitted with a sine curve and the in‐plane displacement values were determined directly from the peak‐to‐valley height and the position of the peak in the fitted curve.

Experimental results showed that the proposed moiré pattern analysis method is able to give in‐plane displacement accuracies of 0.002 mm in the x‐direction and 0.01 in the y‐direction without the need for complex computation.

Resolution of the proposed method is limited only by the resolution of the imaging system.

The proposed graphical method for determining 2D displacement components from the moiré patterns can be applied to low‐frequency circular gratings whose transmittance is not sinusoidal.

The graphical analysis method is novel and allows the displacements components to be determined more easily.