Search results

Measurement-while-drilling (MWD) system has been used to provide trajectory and inclination parameters of the oil and gas well. Fluxgate magnetometer is a traditional choice for one MWD system; however, it cannot obtain effective trajectory parameters in nonmagnetic environments. Fiber-optic-gyroscope (FOG) inclinometer system is a favorable substitute of fluxgate magnetometer, which can avoid the flaws associated with magnetic monitoring devices. However, there are some limitations and increasing surveying errors in this system under high impact conditions. This paper aims to overcome these imperfections of the FOG inclinometer system.

To overcome the imperfections, filtering algorithms are used to improve the precision of the equipment. The authors compare the low-pass filtering algorithm with the wavelet de-noising algorithm applied to real experimental data. Quantitative comparison of the error between the true and processed signal revealed that the wavelet de-noising method outperformed the low-pass filtering method. To achieve optimal positioning effects, the wavelet de-noising algorithm is finally used to inhibit the interference caused by the impact.

The experimental results show that the method proposed can ensure the azimuth accuracy lower than ±2 degrees and the inclination accuracy lower than ± 0.15 degrees under the condition of interval impact. The method proposed can overcome the interference generated by the impact in the well, which makes the instrument suitable for the measurement of small-diameter casing well.

After conducting the wavelet threshold filtering on the raw data of accelerometers, the noise generated by the impact is successfully suppressed, which is expected to meet the special requirement of the down-hole survey environment.

This paper aims to study the transient flow characteristics in a mixed-flow pump during the start-up period.

In this study, numerical calculation of the internal flow field in a mixed-flow pump using the sliding mesh method was carried out. The regulation of the pressure, streamline and the relative speed during the start-up period was analyzed.

The trend of the simulated head is consistent with the experimental results, and the calculated head is around 0.3 m higher than the experimental head when the rotation speed reached the stable stage, indicating that the numerical method for the start-up process simulation of the mixed-flow pump has a high accuracy. At the beginning, the velocity inside the impeller changes little along the radius direction and the flow rate increases slowly during the start-up process. As the rotation speed reached the stable stage, the flow inside the impeller became steady, the vortex reduced and transient effects disappeared gradually.

The study results have significant value for revealing the internal unsteady flow characteristics of the mixed-flow pump and providing the reference for the design optimization of the mixed-flow pump.

The purpose of this study is to explore the transient characteristics of mixed-flow pumps during startup process.

This study uses a full-flow field transient calculation method of mixed-flow pump based on a closed-loop model.

The findings show the hydraulic losses and internal flow characteristics of the piping system during the start-up process.

Large computational cost.

Improve the accuracy of current numerical simulation results in transient process of mixed-flow pump.

Simplify the setting of boundary conditions in the transient calculation.

The purpose of this study is to use a weak light source with spatial distribution to realize light-driven fluid by adding high-absorbing nanoparticles to the droplets, thereby replacing a highly focused strong linear light source acting on pure droplets.

First, Fe₃O₄ nanoparticles with high light response characteristics were added to the droplets to prepare nanofluid droplets, and through the Gaussian light-driven flow experiment, the Marangoni effect inside a nanofluid droplet was studied, which can produce the surface tension gradient on the air/liquid interface and induce the vortex motion inside a droplet. Then, the numerical simulation method of multiphysics field coupling was used to study the effects of droplet height and Gaussian light distribution on the flow characteristics inside a droplet.

Nanoparticles can significantly enhance the light absorption, so that the Gaussian light is enough to drive the flow, and the formation of vortex can be regulated by light distribution. The multiphysics field coupling model can accurately describe this problem.

This study is helpful to understand the flow behavior and heat transfer phenomenon in optical microfluidic systems, and provides a feasible way to construct the rapid flow inside a tiny droplet by light.

The purpose of this paper is to experimentally and numerically study the transient hydraulic impact and overall performance during startup accelerating process of mixed-flow pump.

In this study, the impeller rotor vibration characteristics during the starting period under the action of fluid–structure interaction was investigated, which is based on the bidirectional synchronization cooperative solving method for the flow field and impeller structural response of the mixed-flow pump. Experimental transient external characteristic and the transient dimensionless head results were compared with the numerical calculation results, to validate the accuracy of numerical calculation method. Besides, the deformation and dynamic stress distribution of the blade under the stable rotating speed and accelerating condition were studied based on the bidirectional fluid–structure interaction.

The results show that the combined action of complex hydrodynamic environment and impeller centrifugal force in the startup accelerating process makes the deformation and dynamic stress of blade have the rising trend of reciprocating oscillation. At the end of acceleration, the stress and strain appear as transient peak values and the transient effect is nonignorable. The starting acceleration has a great impact on the deformation and dynamic stress of blade, and the maximum deformation near the rim of impeller outlet edge increases 5 per cent above the stable condition. The maximum stress value increases by about 68.7 per cent more than the steady-state condition at the impeller outlet edge near the hub. The quick change of rotating speed makes the vibration problem around the blade tip area more serious, and then it takes the excessive stress concentration and destruction at the blade root.

This study provides basis and reference for the safety operation of pumps during starting period

To modify a conventional evacuated tube, an improved asymmetric U-type evacuated tube (AUET) is proposed. This study aims to investigate the thermal and hydrodynamic performances of a modified tube and determine the optimal structural form.

Based on the variation of fluid proprieties with temperature, the formulated numerical model was validated and then deployed to investigate the natural circulation in the evacuated tubes. A dimensionless number was proposed to quantify the stratification effect. The influence of the degree of asymmetry of U-type evacuated tubes on the flow patterns, mass flow rate, temperature distribution, thermal stratification and energy conversion efficiency was studied.

When the degree of asymmetry is large, a higher velocity and better thermal stratification are achieved, thereby avoiding stagnant water at the bottom of the tubes simultaneously. Compared with the conventional evacuated tube, the improved evacuated tube exhibited a higher thermal efficiency.

The originally proposed AUET was proven to have better performance in avoiding stagnant water, reducing fluid mixing and improving the heat transfer efficiency.

With the rapid advancement in the automotive industry, the friction coefficient (FC), wear rate (WR) and weight loss (WL) have emerged as crucial parameters to measure the performance of automotive braking systems, so the FC, WR and WL of friction material are predicted and analyzed in this work, with an aim of achieving accurate prediction of friction material properties.

Genetic algorithm support vector machine (GA-SVM) model is obtained by applying GA to optimize the SVM in this work, thus establishing a prediction model for friction material properties and achieving the predictive and comparative analysis of friction material properties. The process parameters are analyzed by using response surface methodology (RSM) and GA-RSM to determine them for optimal friction performance.

The results indicate that the GA-SVM prediction model has the smallest error for FC, WR and WL, showing that it owns excellent prediction accuracy. The predicted values obtained by response surface analysis are closed to those of GA-SVM model, providing further evidence of the validity and the rationality of the established prediction model.

The relevant results can serve as a valuable theoretical foundation for the preparation of friction material in engineering practice.

When solving the cogging torque of complex electromagnetic structures, such as consequent pole hybrid excitation synchronous (CPHES) machine, traditional methods have a huge computational complexity. The notable feature of CPHES machine is the symmetric range of field-strengthening and field-weakening, but this type of machine is destined to be equipped with a complex electromagnetic structure. The purpose of this paper is to propose a hybrid analysis method to quickly and accurately solve the cogging torque of complex 3D electromagnetic structure, which is applicable to CPHES machine with different magnetic pole shapings.

In this paper, a hybrid method for calculating the cogging torque of CPHES machine is proposed, which considers three commonly used pole shapings. Firstly, through magnetic field analysis, the complex 3D finite element analysis (FEA) is simplified to 2D field computing. Secondly, the discretization method is used to obtain the distribution of permeance and permeance differential along the circumference of the air-gap, taking into account the effect of slots. Finally, the cogging torque of the whole motor is obtained by using the idea of modular calculation and the symmetry of the rotor structure.

This method is applicable to different pole shapings. The experimental results show that the proposed method is consistent with 3D FEA and experimental measured results, and the average calculation time is reduced from 8 h to 4 min.

This paper proposes a new concept for calculating cogging torque, which is a hybrid calculation of dimension reduction and discretization modules. Based on magnetic field analysis, the 3D problem is simplified into a 2D issue, reducing computational complexity. Based on the symmetry of the machine structure, a modeling method for discretized analytical models is proposed to calculate the cogging torque of the machine.

This paper applies a volume-price probability wave differential equation to propose a conceptual theory and has innovative behavioral interpretations of intraday dynamic market equilibrium price, in which traders' momentum, reversal and interactive behaviors play roles.

The authors select intraday cumulative trading volume distribution over price as revealed preferences. An equilibrium price is a price at which the corresponding cumulative trading volume achieves the maximum value. Based on the existence of the equilibrium in social finance, the authors propose a testable interacting traders' preference hypothesis without imposing the invariance criterion of rational choices. Interactively coherent preferences signify the choices subject to interactive invariance over price.

The authors find that interactive trading choices generate a constant frequency over price and intraday dynamic market equilibrium in a tug-of-war between momentum and reversal traders. The authors explain the market equilibrium through interactive, momentum and reversal traders. The intelligent interactive trading preferences are coherent and account for local dynamic market equilibrium, holistic dynamic market disequilibrium and the nonlinear and non-monotone V-shaped probability of selling over profit (BH curves).

The authors will understand investors' behaviors and dynamic markets through more empirical execution in the future, suggesting a unified theory available in social finance.

The authors can apply the subjects' intelligent behaviors to artificial intelligence (AI), deep learning and financial technology.

Understanding the behavior of interacting individuals or units will help social risk management beyond the frontiers of the financial market, such as governance in an organization, social violence in a country and COVID-19 pandemics worldwide.

It uncovers subjects' intelligent interactively trading behaviors.

The main goal of the physical education (PE) environment is that each individual trained should achieve self-fulfillment with the large group of students involved with their own efforts. Deep learning is applying transferrable knowledge in new situations to help the students master in tough circumstances. In PE training, injuries occur when working together as a team. Safety measures are taken immediately as an emergency response to reduce the potential risk in students by providing first aid. To provide safety measures for the injured student immediately, the environment is monitored in real-time using a GPS.

Theory of Humanities Education (ToHE) infers that it has less collection of theories and a wide range of applications than the state-of-the-art systems. ToHE allows students to think creatively and play a vital role in one’s health which is a critical aspect in PE. The ToHE theory focuses on two main concepts, i.e. by using a methodological approach to analyse and deep learning to solve the problem. PE motivates college students to follow a healthy and active lifestyle.

The proposed system is deployed in real time for monitoring the student’s performance and provides an emergency response with an accuracy rate of 90%.

The deep learning offers solutions to the injuries by using the deep convolutional neural network to provide interpretability of the consequence by training it with various injuries that occur in the playground and inappropriate use of sports equipment. A case study provided in this paper outlines an emergency response scenario to an injured student in sports training.