Search results

This study aims to describe the conversion of rice straw (RS) as an agricultural plant waste to high-performance cationic flocculant for kaolin clay suspension in wastewater treatment as an alternative to synthetic ones.

This was done by grafting rice straw after pretreatment with acrylamide (Aam) using microwave irradiation technique without using an initiator in an open vessel container for wastewater treatment. Radiation time, monomer and rice straw pulp concentration as well as microwave power were scrutinized to examine their impact on maximizing the graft yield %. Application of the resultant copolymers as flocculants for kaolin clay suspension was willful by studying the foremost influences inducing the flocculation process, for instance, flocculent dose, pH, stirring speed and extent of grafting.

It is seen from the obtained results that both FTIR, SEM, X-Ray diffraction, Thermo gravimetric analysis and Zeta potential confirmed the formation of the cationic amide group onto the graft copolymer chain in comparison with the ungrafted one; the microwave initiation method proved to be a very efficient tool concerning maximizing the graft yield % with no harsh chemicals used for initiating grafting; the flocculation efficiency of the prepared copolymers augmented by increasing the flocculant dose, pH and stirring speed to a maximum value signified at 2.0 g, 6.0 and 75 r/min, respectively, then decreased thereafter while increased by increasing the extent of grafting within the range studied; the flocculant reserved high flocculation efficiency even after five cycles of flocculation/regeneration; preliminary bridging mechanism demonstrating the attraction between the kaolin anionic suspended particles and cationic poly (Aam)-rice straw graft copolymer has been predicted.

The novelty addressed here is undertaken by preparing a very efficient cationic flocculant using rice straw waste with different degrees of grafting for the treatment of wastewater using this kind of microwave irradiation approach as an eco-friendly tool. As far as the authors are aware, no thorough investigation has been done in the literature until now dealing with the above-mentioned preparation process.

This study aims to use whiteness (WI) and yellowness indices (YI) that were calculated from the International Commission on Illumination (CIE) color parameter to evaluate the efficiency of some triazole fungicides [propiconazole (C₁₅H₁₇Cl₂N₃O₂) and tebuconazole (C₁₆H₂₂ClN₃O)] to protect wooden artifacts from fungal deterioration.

Archeological wooden samples were collected from some historical Islamic buildings in Cairo, Egypt. Three species of fungi were identified in previous work. Propiconazole and tebuconazole with different concentrations treated the infected wooden samples aged for different periods. WI and YI of studied samples were measured using UV spectrophotometer. Calibration and uncertainty estimation accompanied by color measurement were studied.

Studying the uncertainty sources of diffuse reflection of the standard white tiles revealed that the uncertainty of calibration for both the spectrophotometer and white tiles had the highest contribution. The treated samples with tebuconazole and propiconazole fungicides gave good resistance against fungal deterioration at 0.50% for WI and YI.

This study presents the importance of colorimetry in the conservation field because they are considered one of the most important criteria to evaluate conservation materials. From color measurements and their uncertainties, it became clear that triazole fungicides have good efficiency in the protection of wooden artifacts from fungal deterioration. The value of this study is that propiconazole and tebuconazole fungicides at 0.50% can be applied to archaeological wood that is endangered to improper conditions, especially in the case of high levels of relative humidity.