Search results

The use of waste polyethylene terephthalate (PET) plastics derived from shredded bottles in concrete is not formalized yet, especially in reinforced members such as beams and columns. The disposal of plastic wastes in concrete is a viable alternative to manage those wastes while minimizing the environmental impacts associated to recycling, carbon dioxide emissions and energy consumption.

This paper evaluates the suitability of 2D deterministic and stochastic finite element (FE) modeling to predict the shear strength behavior of reinforced concrete (RC) beams without stirrups. Different concrete mixtures prepared with 1.5%–4.5% PET additions, by volume, are investigated.

Test results showed that the deterministic and stochastic FE approaches are accurate to assess the maximum load of RC beams at failure and corresponding midspan deflection. However, the crack patterns observed experimentally during the different stages of loading can only be reproduced using the stochastic FE approach. This later method accounts for the concrete heterogeneity due to PET additions, allowing a statistical simulation of the effect of mechanical properties (i.e. compressive strength, tensile strength and Young’s modulus) on the output FE parameters.

Data presented in this paper can be of interest to civil and structural engineers, aiming to predict the failure mechanisms of RC beams containing plastic wastes, while minimizing the experimental time and resources needed to estimate the variability effect of concrete properties on the performance of such structures.

The purpose of this paper is to examine the use of phragmites australis ash (PAA) in cementitious systems to achieve sustainable construction.

In this paper, the properties of mortar containing PAA as partial cement replacement are determined. The PAA is produced through slow burning in a closed system to minimize the CO₂ emission. A total of four mortar mixes are prepared with PAA replacement levels ranging from 0% to 30% by weight. The water to binder and the proportions of binder to sand are 0.55 and 1:3 by weight, respectively. The properties tested are density, compressive strength, flexural strength, ultrasonic pulse velocity, water absorption by total immersion and capillary rise. Testing is conducted at 1, 7, 28 and 90 days.

While there is a decrease in strength as the amount of PAA increases, there is strong indication of pozzolanic reaction in the presence of PAA. This is in agreement with the results reported by Salvo et al. (2015), where they found noticeable pozzolanic activities in the presence of straw ash, which is rich in SiO₂ and relatively high K₂O content. At 90 days of curing, there is a decrease of 5% in compressive strength at 10% PAA replacement. However, at 20% and 30% replacement, the reduction in compressive strength is 23% and 32%, respectively. The trend in flexural strength and ultrasonic pulse velocity is similar to that in compressive strength. The water absorption by total immersion and capillary rise tends to increase with increasing amounts of PAA in the mix. There seems to be a linear relationship between water absorption and compressive strength at each curing age.

The Phragmites australis plant used in this investigation is obtained from one location and this present a limitation as the type of soil may change the properties. Also one method of slow burning is used. Different burning methods may alter the composition of the PAA.

This outcome of this research will contribute towards sustainable development as it will make use of the waste generated, reduce the amount of energy-intensive cement used in construction and help generate local employment in the area where the Phragmites australis plant grows.

To the best knowledge of the authors, the ash from the Phragmites australis plant has not been used in cementitious system and this research can be considered original as it examines the properties of mortar containing PAA. Also, the process of burning in a closed system using this material.

The Asia‐Pacific region, one of the world's fastest growing markets is experiencing wide and growing use of countertrade. This paper explores some of the factors leading to increased use of countertrade deals in the Asia‐Pacific market. Recent examples of countertrade transactions in the region are reviewed and the implications for management are explored.

Accreditation as a mean to improve the position of the university has become one of the major illustration of non-price competition. Three major accreditation bodies, known as the “big three”, dominate the market of business schools’ accreditation in the world, namely, AACSB, EQUIS and AMBA. This paper aims to explore the current of accreditation of business schools in Lebanon, and to test for the difference of tuition fees between accredited institutions by any of the “big three” and other business schools.

Using a desktop research approach, the paper provides the list of the accredited business schools from the “big three” in the Arab region and Lebanon and compiles data about the number of business schools in Lebanon since 1960, their tuition fees, and their accreditation status. Using a parametric and nonparametric procedure, the paper compares the tuition mean difference between accredited and non-accredited business schools.

The paper reveals an alarming slow progress in the Arab world when it comes to accreditation. In Lebanon, the paper finds that only seven out of 37 business schools are accredited and only three hold an accreditation from the “big three”. The two samples t-test and the Mann–Whitney U-test show that accredited schools charge tuition fees that are three times the average of other schools.

This paper can be improved by using a larger sample and investigate the effect of accreditation on tuition fees.

The results highlight the existence of a gap when it comes to accreditation in the Arab region and the importance of policy-making in promoting accreditation. Moreover, business schools in Lebanon should be aware that accreditation with the “big three” could be associated with substantial increase in tuition fees.

This paper is the first to investigate the state of accreditation of business schools in Lebanon and its association with tuition fees.

The purpose of this paper is to identify factors that motivate women in the United Arab Emirates (UAE) to become self‐employed.

Different factors, documented in previous research, that affect women's decisions to start their own businesses were included in a questionnaire. A total of 750 women entrepreneurs in the UAE were asked to express the degree of agreement with the factors listed in the questionnaire. Of them, 449 completed the questionnaire.

Financial support from the government especially in the start‐up capital is an important factor that motivates women to establish their own businesses. Self‐fulfillment, knowledge, skills and experience, including relationship to spouse/father business, are all important factors in the development of women entrepreneurs. Unlike previous research factors such social norms, market network, and competition do not seem to be barriers for women in becoming entrepreneurs.

Questionnaires were mainly distributed in Abu Dhabi and Dubai. To give a clear picture of factors affecting women's decision to start their own businesses in the UAE, the opinion of women located in other Emirates needs to be investigated. The questionnaire survey targeted women entrepreneurs. To give a clear picture, future studies should target women who chose not to start their own businesses.

The outcome of this study will be used by researchers and policy makers to motivate women to become entrepreneurs. Women involvement in developing their businesses provides job opportunities and ensures that women are taking active part in the development of the national economy.

This is the first study that uses empirical evidence to identify factors that motivate women in the UAE to become self‐employed.

The purpose of this study is to identify the antecedents of “power” and “dependence” attributes in the context of a construction project and to explore the impact of the antecedents on risk transfer and collaboration to develop a conceptual framework for decision-making.

A systematic review was performed using various databases to identify the antecedents and their measures. This review followed the established preferred reporting items for systematic reviews and meta-analyses protocols and 246 articles were identified. The articles were qualitatively analysed based on keyword co-occurrence approach using VOSviewer software.

The findings of this systematic review established latent constructs, that is, “clarity of procurement decisions”, “market structure” and “market competition” as antecedents of power and two antecedents of dependence, namely, “reputation” and “commercial importance”. And a framework was conceptualized to determine the contractual approach and the procurement design should be planned to take in account the scenarios and the course of action to enhance collaboration and control risk transfer.

To the best of the authors’ knowledge, this study is the first of its kind to identify the “antecedents” of the attributes of “power” and dependence and framework was conceptualized to determine the contractual approach.

The purpose of this paper is to explore gender differences in ethical attitudes along two dimensions: perceived ethical strategies for career advancement, or upward‐influence ethics; and perceived ethical roles of business in society and the natural environment, or business social and environmental responsibility.

Employing a variance decomposition procedure, the paper identifies substantive differences in the ethical perceptions of Egyptian male and female managers.

Female managers find more covert upward‐influence strategies – strategies that are less aboveboard and transparent – acceptable and eschew overt upward‐influence tactics – strategies that are aboveboard and transparent. Female managers also envision a larger role for business in society, particularly in terms of social responsibilities than do male managers.

The study is exploratory, employing a small sample in a single country.

The findings contribute to ongoing debates about the role that a person's gender plays in influencing his/her ethical perspective, examining the issue in a developing country context. This paper's contribution is also methodological, demonstrating how variance decomposition can be used to examine these issues.

Formulating strategic decisions poses a significant challenge for construction organizations, profoundly impacting their overarching strategic management. The success of an organization’s strategy relies on how information is managed and decisions are executed. However, the literature has a limited understanding of the connection between information quality and strategic decision-making, particularly in construction business performance. This study aims to bridge this gap by exploring how information quality mediates the relationship between strategic decision-making and the performance of construction businesses in New Zealand.

This quantitative study aims to fill this gap by assessing how information quality shapes strategic decision-making practices, impacting construction organizations’ performance. Analysing 102 viable responses through partial least squares structural equation modeling structural equation modelling offers partial support to the research framework.

The study used statistical analysis to gauge the impact of adopting strategic management practices on construction business performance, considering the mediation of the quality of information within New Zealand’s context. It affirmed a positive correlation between strategic decision-making management and construction business performance, underpinned by the mediation of quality of information.

This study underscores the critical role of information quality in evaluating strategic decisions for bolstering construction business performance. In essence, it affirms that enhancing the performance of construction organizations via strategic decision-making is intrinsically linked to the quality of information.

This study makes a noteworthy contribution by establishing connections between decision importance, process effectiveness, information quality, intuition in decision-making and model development, providing valuable insights to the field.

Occupational Safety and Health Administration (OSHA) of the U.S. government ensures that all health and safety regulations, protecting the workers, are enforced. OSHA officers conduct inspections and assess fines for non-compliance and regulatory violations. Literature discussion on the economic impact of OSHA inspections with COVID-19 related citations for the construction sector is lacking. This study aims to investigate the relationships between the number of COVID-19 cases, construction employment and OSHA citations and it further evaluates the total and monthly predicted cost impact of OSHA citations associated with COVID-19 violations.

An application of multiple regression analysis, a supervised machine learning linear regression model, based on K-fold cross validation sampling and a probabilistic risk-based cost estimate Monte Carlo simulation were utilized to evaluate the data. The data were collected from numerous websites including OSHA, Centers for Disease Control and the World Health Organization.

The results show that as the monthly construction employment increased, there was a decrease in OSHA citations. Conversely, the cost impact of OSHA citations had a positive relationship with the number of COVID-19 cases. In addition, the monthly cost impact of OSHA COVID-19 related citations along with the total cost impact of citations were predicted and analyzed.

The application of the two models on cost analysis provides a thorough comparison of predicted and overall cost impact, which can assist the contractors to better understand the possible cost ramifications. Based on the findings, it is suggested that the contractors include contingency fees within their contracts, hire safety managers to implement specific safety protocols related to COVID-19 and request a safety action plan when qualifying their subcontractors to avoid potential fines and citations.

The construction industry presents a particularly notable and demanding setting where sexual harassment demands special consideration. With its largely male-dominated workforce, intense work settings and entrenched workplace norms, the construction sector provides a unique backdrop in which the complexities of sexual harassment manifest. The purpose of this study is to investigate the relationship between sexual harassment and employee performance in the construction industry, with a particular focus on examining the mediating roles of psychological distress and employee engagement.

A cross-sectional survey design was utilized to collect data from 188 construction industry professionals. Participants completed validated questionnaires assessing their experiences with sexual harassment, levels of psychological distress, employee engagement and self-reported performance indicators. Partial least square-structural equation modeling (PLS-SEM) was conducted to examine the direct and mediated effects of sexual harassment on employee performance through psychological distress and employee engagement.

The findings reveal a lack of statistical significance in the negative relationship between sexual harassment and employee performance within the construction sector. Furthermore, there was a significant negative relationship between sexual harassment and employee engagement. Employee engagement emerged as a full mediator, buffering the negative effects of harassment on performance and suggesting that engaged employees may be better equipped to cope with and mitigate the impact of harassment.

The study’s findings contribute to understanding workplace dynamics amidst sexual harassment in construction. Work engagement fully mediates the relationship, highlighting the need to prioritize initiatives aimed at enhancing employee engagement, such as promoting a supportive and fostering open communication channels between management and employees, can mitigate the occurrence and negative impacts of sexual harassment on employee performance. Continuous monitoring of engagement levels is crucial for sustaining positive work environments.

This study contributes to the existing literature by providing quantitative evidence of the relationship between sexual harassment and employee performance in the construction industry. By examining the mediating roles of psychological distress and employee engagement, the research offers a deeper understanding of the mechanisms underlying this relationship. The findings underscore the importance of addressing sexual harassment and promoting employee well-being to foster a safe and productive work environment in the construction industry.