Search results

In order to find an appropriate method to synthesize a new high-efficiency flame retardant for epoxy resin.

In this work, a flame retardant with heterocyclic groups, HOMP, was acquired after removing the obstacle from triazines which was not readily soluble. The molecular structure, thermal and flame retardant properties were fully characterized and analyzed. Also, the mechanism was researched through multi-methodologies. As well, the authors evaluated the effects of HOMP on mechanical properties.

The results suggested that HOMP helped extinguish the combustion of specimens and could reach an LOI value of 29.2% and the V0 level in the UL-94 test with a phosphorus content of only 0.6wt%. With respect to the mechanism, HOMP was a gas-phase flame retardant and helped generate a thicker carbon protective coating. However, for the mechanical properties, the addition of HOMP enhanced the compressibility, while the tensile strength decreased significantly.

The approach not only simplified the operations but also obtained HOMP with excellent flame retardant properties.

The purpose of this paper is to prepare a multifunctional nanocomposite that is slow-release and resistant to seawater corrosion and biofouling corrosion and to explore the synergistic effect between the two corrosion inhibitors.

The morphology, structure and release properties of CAP@HNTs, BTA@HNTs and CAP/BTA@HNTs were investigated by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, specific surface area analysis and UV spectrophotometry. The corrosion resistance and antimicrobial properties were investigated by electrochemical measurements and bioinhibition rate tests, and the synergistic effect between the two corrosion inhibitors was explored by X-ray photoelectron spectroscopy.

The CAP/BTA@HNTs are responsive to acidic environments and have significantly improved antibacterial and corrosion resistance compared with CAP@HNTs and BTA@HNTs. CAP and BTA have a positive synergistic effect on anticorrosion and antifouling.

Two types of inhibitors, anticorrosion and antifouling, were loaded into the same nanocontainer to prepare a slow-releasable and multifunctional nanocomposite with higher resistance to seawater corrosion and biocorrosion and to explore the synergistic effect of CAP and BTA on corrosion resistance.

The purpose of this paper is to identify corrosion types and corrosion transitions by a novel electrochemical noise analysis method based on Adaboost.

The corrosion behavior of Q235 steel was investigated in typical passivation, uniform corrosion and pitting solution by electrochemical noise. Nine feature parameters were extracted from the electrochemical noise data based on statistical analysis and shot noise theory. The feature parameters were analysis by Adaboost to train model and identify corrosion types. The trained Adaboost model was used to identify corrosion type transitions.

Adaboost algorithm can accurately identify the corrosion type, and the accuracy rate is 99.25%. The identification results of Adaboost for the corrosion type are consistent with corroded morphology analysis. Compared with other machine learning, Adaboost can identify corrosion types more accurately. For corrosion type transition, Adaboost can effectively identify the transition from passivation to uniform corrosion and from passivation to pitting corrosion consistent with corroded morphology analysis.

Adaboost is a suitable method for prediction of corrosion type and transitions. Adaboost can establish the classification model of metal corrosion, which can more conveniently and accurately explore the corrosion types. Adaboost provides important reference for corrosion prediction and protection.

The purpose of this paper is to improve the control precision of the station-keeping control for a stratosphere airship through the feedforward-feedback PID controller which is designed by the wind speed prediction based on the incremental extreme learning machine (I-ELM).

First of all, the online prediction of wind speed is implemented by the I-ELM with rolling time. Second, the feedforward-feedback PID controller is designed through the position information of the airship and the predicted wind speed. In the end, the one-dimensional dynamic model of the stratosphere airship is built, and the controller is applied in the numerical simulation.

Based on the conducted numerical simulations, some valuable conclusions are obtained. First, through the comparison between the predicted value and true value of the wind speed, the wind speed prediction based on I-ELM is very accurate. Second, the feedforward-feedback PID controller designed in this paper is very effective.

This paper is very valuable to the research of a high-accuracy station-keeping control of stratosphere airship.

The purpose of this paper is to extract electrochemical reaction kinetics parameters, such as Tafel slope, exchange current density and equilibrium potential, which cannot be directly measured, this study aims to propose an improved particle swarm optimization (PSO) algorithm.

In traditional PSO algorithms, each particle’s historical optimal solution is compared with the global optimal solution in each iteration step, and the optimal solution is replaced with a certain probability to achieve the goal of jumping out of the local optimum. However, this will to some extent undermine the (true) optimal solution. In view of this, this study has improved the traditional algorithm: at each iteration of each particle, the historical optimal solution is not compared with the global optimal solution. Instead, after all particles have iterated, the optimal solution is selected and compared with the global optimal solution and then the optimal solution is replaced with a certain probability. This to some extent protects the global optimal solution.

The polarization curve plotted by this equation is in good agreement with the experimental values, which demonstrates the reliability of this algorithm and provides a new method for measuring electrochemical parameters.

This study has improved the traditional method, which has high accuracy and can provide great support for corrosion research.

Current modellings of granular collapse are lack of considering the effect of soil density. This paper aims to present a numerical method to analyse the collapse of granular column based on the critical-state soil mechanics.

In the proposed method, a simple critical-state based constitutive model is first adopted and implemented into a finite element code using the coupled Eulerian–Lagrangian technique for large deformation analysis. Simulations of column collapse with various aspect ratios are then conducted for a given initial soil density. The effect of aspect ratio on the final size of deposit morphology, dynamical collapse profiles and the stable region is discussed comparing to experimental results. Moreover, complementary simulations with various initial soil densities on each aspect ratio are conducted.

Simulations show that a lower value of initial density leads to a lower final deposit height and a longer run-out distance. The simulated evolutions of kinetic energy and collapsing profile with time by the proposed numerical approach also show clearly a soil density-dependent collapse process.

To the end, this study can improve the understanding of column collapse in different aspect ratios and soil densities, and provide a computational tool for the analysis of real scale granular flow.

The originality of this paper is proposed in a numerical approach to model granular column collapse considering the influences of aspect ratio and initial void ratio. The proposed approach is based on the finite element platform with coupled Eulerian–Lagrangian technique for large deformation analysis and implementing the critical-state based model accounting for the effect of soil density.

The purpose of this paper is to combine triboelectric nanogeneration technology with ball bearing structure to achieve energy collection and fault monitoring.

In this paper, according to the rotation mode of ball bearings, the freestanding mode of triboelectric nanogeneration is selected to design and manufacture a novel triboelectric nanogeneration device Rolling Ball Triboelectric Nanogenerator (RB-TENG) which combines rotary energy collection with ball bearing fault self-sensing.

The 10,000s continuous operation experiment of the RB-TENG is carried out to verify its robustness. The accurate feedback relationship between the RB-TENG and rotation velocity can be demonstrated by the fitting comparison between the theoretical and experimental electrical signal periods at a certain time. By comparing the output electrical signals of the normal RB-TENG and the rotor spalling RB-TENG and polytetrafluoroethylene (PTFE) balls with different degrees of wear at 500 r/min, it can be concluded that the RB-TENG has an ideal monitoring effect on the radial clearance distance of bearings. The spalling fault test of the RB-TENG stator inner ring and rotor outer ring is carried out.

Through coupling experiments of rotor spalling fault of the RB-TENG and PTFE balls fault with different degrees of wear, it can be seen that when rotor spalling fault occurs, balls wear has a greater impact on the normal operation of the RB-TENG, and it is easier to identify. The fault self-sensing ability of the RB-TENG can be obtained, which is expected to provide an effective scheme for monitoring the radial wear clearance distance of ball bearings.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2024-0295/

Along with the “reform and open door” policy launched in the late 1970s, China has experienced an annual average GDP growth rate of 9.8% between 1978 and 2002 (Hu, 2003, October 19). China's economy system has also gone through a fundamental transition from a central planning system to a socialist free market economy. To cope with the booming economy and radical social changes, the higher education system of China has been undergoing a process of expansion with marketization (World Bank, 1997).

The results of this study have significant policy implications for charting a new course toward enhancing agricultural productivity among Chinese farmers.

By establishing a rural household decision-making model based on the transfer market of farmland operation rights, this paper systematically analyzes the effects of land transfer-in and land transfer-out on the productivity (per labor income) of rural households. The authors conducted basic regression analysis and robustness tests using propensity score-matching and proxy variable approaches based on the micro survey data from rural households in 30 counties in 21 provinces/municipalities/autonomous regions in 2013.

After the completion of land transfer, the total productivity of rural households transferring in lands will increase with an increase in the agricultural productivity; the total productivity of rural households transferring out land will increase due to a rise in non-agricultural productivity and the absolute total productivity of rural households not involved in land transfer will remain unchanged.

Unlike previous literature, this paper discusses the impacts of land transfer-in and transfer-out on total productivity, agricultural productivity and non-agricultural productivity among various rural households (i.e. those transferring in land, transferring out land or which are self-sufficient).

This study aims to solve the problems of ambiguous localization, large calculation, poor real-time and limited applicability of bolt thread defect detection.

First, the acquired ultrasound image is used to acquire the larger area of the image, which is set as the compliant threaded area. Second, based on the determined coordinates of the center point in each selected region, the set of coordinates on the left and right sides of the bolts is acquired by DBSCAN method with parameters eps and MinPts, which is determined by data set dimension D and the k-distance curve. Finally, the defect detection boundary line fitting is completed using the acquired coordinate set, and the relationship between the distance from each detection point to the curve and d, which is obtained from the measurement of the standard bolt sample with known thread defect, is used to locate the bolt thread defect simultaneously.

In this paper, the bolt thread defect detection method with ultrasonic image is proposed; meanwhile, the ultrasonic image acquisition system is designed to complete the real-time localization of bolt thread defects.

The detection results show that the method can effectively detect bolt thread defects and locate the bolt thread defect location with wide applicability, small calculation and good real-time performance.