Search results

Utilizing electrical discharge machining (EDM) to process micro-holes in superalloys may lead to the formation of remelting layers and micro-cracks on the machined surface. This work proposes a method of composite processing of EDM and ultrasonic vibration drilling for machining precision micro-holes in complex positions of superalloys.

A six-axis computer numerical control (CNC) machine tool was developed, whose software control system adopted a real-time control architecture that integrates electrical discharge and ultrasonic vibration drilling. Among them, the CNC system software was developed based on Windows + RTX architecture, which could process the real-time processing state received by the hardware terminal and adjust the processing state. Based on the SoC (System on Chip) technology, an architecture for a pulse generator was developed. The circuit of the pulse generator was designed and implemented. Additionally, a composite mechanical system was engineered for both drilling and EDM. Two sets of control boards were designed for the hardware terminal. One set was the EDM discharge control board, which detected the discharge state and provided the pulse waveform for turning on the transistor. The other was a relay control card based on STM32, which could meet the switch between EDM and ultrasonic vibration, and used the Modbus protocol to communicate with the machining control software.

The mechanical structure of the designed composite machine tool can effectively avoid interference between the EDM spindle and the drilling spindle. The removal rate of the remelting layer on 1.5 mm single crystal superalloys after composite processing can reach over 90%. The average processing time per millimeter was 55 s, and the measured inner surface roughness of the hole was less than 1.6 µm, which realized the  micro-hole machining without remelting layer, heat affected zone and micro-cracks in the single crystal superalloy.

The test results proved that the key techniques developed in this paper were suite for micro-hole machining of special materials.

The purpose of this paper is to consider three factors, namely, intra-week demand fluctuations, interrelationship between the number of robots and order scheduling and conflicting objectives (i.e. cost minimization and customer satisfaction maximization), to optimize the robot logistics system.

The number of robots and the sequence of delivery orders are first optimized using the heuristic algorithm NSGACoDEM, which is designed using genetic algorithm and composite difference evolution. The superiority of this method is then confirmed by a case study of a four-star grade hotel in South Korea and several comparative experiments.

Two performance metrics reveal the superior performance of the proposed approach compared to other baseline approaches. Results of comparative experiments found that the consideration of three influencing factors in the operation design of a robot logistic system can effectively balance cost and customer satisfaction over the course of a week in hotel operation and optimize robot scheduling flexibility.

The results of this study reveal that numerous factors (e.g. intra-week demand fluctuations) can optimize the performance efficiency of robots. The proposed algorithm can be used by hotels to overcome the influence of intra-week demand fluctuations on robot scheduling flexibility effectively and thereby enhance work efficiency.

The design of a novel algorithm in this study entails enhancing the current robot logistics system. This algorithm can successfully manage cost and customer satisfaction during off-seasons and peak seasons in the hotel industry while offering diversified schemes to various types of hotels.

Although building information modeling (BIM) has brought competitive advantages and many new jobs, the BIM-related job market is still confusing in China, which will undermine the adoption of BIM. This paper aims to show what kinds of BIM-related jobs are there in China, what employers require and whether all BIM engineers are the same kind.

A text mining approach, structural topic model, was used to process the job descriptions of 1,221 BIM-related online job advertisements in China, followed by a cluster analysis based on it.

First, 10 topics of requirements with the impact of experience and educational background to them were found, namely, rendering software, international project, design, management, personal quality, experience, modeling, relation and certificate. Then, six types were clustered, namely, BIM modeler, BIM application engineer, BIM consultant, BIM manager, BIM developer and BIM designer. Finally, different kinds of BIM engineers proved this title was an expediency leading to confusion.

This paper can provide a clear and insightful look into the confusing and unheeded BIM-related job market in China and might help to cope with the abuse of job titles. It could also benefit both employers and candidates in their recruitment for better matching.

In September 2019, Booking.com changed from the smiley-based scoring system (2.5–10) to the purely 10-point evaluation system (1–10). The smiley-based service evaluation is based on the multi-dimensional (M-D) system, whereas the purely 10-point service evaluation is based on the single-dimensional (S-D) system. This paper aims to focus on how a change in review posting policies impacts service evaluations regarding review generation and distribution.

The authors exploit the natural experiment using Booking.com when the site changed its scoring system from a multidimensional smiley-based service evaluation system to an S-D scoring system. The authors collected online reviews posted on two travel agencies (Booking.com and Priceline.com) between September 2019 and October 2020. A quasi-experimental approach, Difference-in-Differences, was used to isolate the impacts of the new scoring system from the impacts of the change in the service evaluation environment, i.e. COVID-19.

The change in the scoring system considerably alters review distributions by decreasing the portion of positive reviews but increasing the portion of highly positive reviews. Using the theory of emotion work (Hochschild, 1979, 2001), DID is also the reason that the former M-D smiley-based system could have underrated, highly positive reviews of services. Using the information transfer theory (Belkin, 1984), the authors reason the asymmetric transfer of information when users consume reviews from the older (M-D) system but are required to generate reviews on a newer (S-D) system.

The findings would provide online review platform management with a deeper understanding of the consequences of changes in service evaluations when the scoring system is changed.

Though the change in the scoring system would affect how customers evaluate the services of hotels, the causal impacts of switching to the new S-D scoring system have not yet been thoroughly covered by prior hospitality and service evaluation literature, which this research aspires to do.

Traditional nondestructive failure localization techniques are increasingly difficult to meet the requirements of high density and integration of system in package (SIP) devices in terms of resolution and accuracy. Time domain reflection (TDR) is recognized as a novel positioning analysis technology gradually being used in the electronics industry because of the good compatibility, high accuracy and high efficiency. However, there are limited reports focus on the application of TDR technology to SiP devices.

In this study, the authors used the TDR technique to locate the failure of SiP devices, and the results showed that the TDR technique can accurately locate the cracking of internal solder joints of SiP devices.

The measured transmission rate of electromagnetic wave signal was 9.56 × 107 m/s in the experimental SiP devices. In addition, the TDR technique successfully located the failure point, which was mainly caused by the cracking of the solder joint at the edge of the SiP device after 1,500 thermal cycles.

TDR technology is creatively applied to SiP device failure location, and quantitative analysis is realized.

This study aims to explore how the “new normal” induces the dynamics in the asymmetric relationship between service quality attributes and customer satisfaction.

This study analyzes online reviews for hotels in New York City. The authors use multi-attribute models to examine how a situational factor – the COVID-19 outbreak – creates dynamics in the asymmetric effect of service quality attributes on customer satisfaction. Then, the authors examine the change in these dynamics over time after adjusting to the “new normal.”

The COVID-19 pandemic has introduced dynamics into the asymmetrical relationship between hotel service attribute performances and customer satisfaction. The pandemic magnified the asymmetric influences of particular attributes on satisfaction in the hospitality industry. In addition, the findings indicate the changes in such dynamics over time.

The findings emphasize that hotel managers should consider situational factors when understanding customer satisfaction. Particularly, this study suggests developing tailored strategies for responses during the COVID-19 pandemic. Hotel managers need to address changing customer expectations of service attributes to overcome unprecedented difficulties because of the limitations and new needs imposed during the pandemic.

This study contributes to the hospitality literature with an understanding of the significance of situational factors in asymmetric analysis.

The purpose of this study is to solve the problem of longer dead-time in the rear bridge leg switches and lower efficiency in the Four-Switch Buck-Boost LLC Resonant Converter.

The paper adopts time-domain analysis to derive the time-domain expression for optimal dead time, analyzing the conditions for achieving soft switching of the transistors. It further explores the relationship between the dead time of the bridge arm switching transistors and the input/output of the converter under different operating conditions. Specifically, the dead time of the upper bridge arm transistors increases with the converter input voltage and decreases with the output current. In contrast, the dead time of the lower bridge arm transistors is independent of the converter output current and decreases with increasing converter input voltage.

By simulating and constructing a 500 W experimental prototype, experimental results indicate that designing the dead time of the switch according to the optimal dead time proposed in this paper significantly improves efficiency when the converter operates from heavy load to full load. When the transformer takes minimum input, maximum input and intermediate bus voltage inputs respectively, its peak efficiency is increased by 0.6%, 1.7% and 1.1%, respectively, compared to the traditional four-switch Buck–Boost LLC resonant converter.

Experimental validation confirms the correctness of the optimal dead time design and analyzes the impact of different operating conditions of the converter on the dead time. This is of significant importance for the rational design of switch dead times and the enhancement of converter efficiency.

The purpose of this study is to use the corrected stress field theory to derive the shear capacity of geopolymer concrete beams (GPC) and consider the shear-span ratio as a major factor affecting the shear capacity. This research aims to provide guidance for studying the shear capacity of GPC and to observe how the failure modes of beams change with the variation of the shear-span ratio, thereby discovering underlying patterns.

Three test beams with shear span ratios of 1.5, 2.0 and 2.5 are investigated in this paper. For GPC beams with shear-span ratios of 1.5, 2.0 and 2.5, ultimate capacities are 337kN, 235kN and 195kN, respectively. Transitioning from 1.5 to 2.0 results in a 30% decrease in capacity, a reduction of 102kN. Moving from 2.0 to 2.5 sees a 17% decrease, with a loss of 40KN in capacity. A shear capacity formula, derived from modified compression field theory and considering concrete shear strength, stirrups and aggregate interlocking force, was validated through finite element modeling. Additionally, models with shear ratios of 1 and 3 were created to observe crack propagation patterns.

For GPC beams with shear-span ratios of 1.5, 2.0 and 2.5, ultimate capacities of 337KN, 235KN and 195KN are achieved, respectively. A reduction in capacity of 102KN occurs when transitioning from 1.5 to 2.0 and a decrease of 40KN is observed when moving from 2.0 to 2.5. The average test-to-theory ratio, at 1.015 with a variance of 0.001, demonstrates strong agreement. ABAQUS models beams with ratios ranging from 1.0 to 3.0, revealing crack trends indicative of reduced crack angles with higher ratios. The failure mode observed in the models aligns with experimental results.

This article provides a reference for the shear bearing capacity formula of geopolymer reinforced concrete (GRC) beams, addressing the limited research in this area. Additionally, an exponential model incorporating the shear-span ratio as a variable was employed to calculate the shear capacity, based on previous studies. Moreover, the analysis of shear capacity results integrated literature from prior research. By fitting previous experimental data to the proposed formula, the accuracy of this study's derived formula was further validated, with theoretical values aligning well with experimental results. Additionally, guidance is offered for utilizing ABAQUS in simulating the failure process of GRC beams.

This study conducts a comparative analysis of the diversification effects of China's national carbon market (CEA) and the EU ETS Phase IV (EUA) within major commodity markets.

The study employs the TVP-VAR extension of the spillover index framework to scrutinize the information spillovers among the energy, agriculture, metal, and carbon markets. Subsequently, the study explores practical applications of these findings, emphasizing how investors can harness insights from information spillovers to refine their investment strategies.

First, the CEA provide ample opportunities for portfolio diversification between the energy, agriculture, and metal markets, a desirable feature that the EUA does not possess. Second, a portfolio comprising exclusively energy and carbon assets often exhibits the highest Sharpe ratio. Nevertheless, the inclusion of agricultural and metal commodities in a carbon-oriented portfolio may potentially compromise its performance. Finally, our results underscore the pronounced advantage of minimum spillover portfolios; particularly those that designed minimize net pairwise volatility spillover, in the context of China's national carbon market.

This study addresses the previously unexplored intersection of information spillovers and portfolio diversification in major commodity markets, with an emphasis on the role of CEA.

With the rapid growth of the domestic lending industry, assessing whether the borrower of each loan is at risk of default is a pressing issue for financial institutions. Although there are some models that can handle such problems well, there are still some shortcomings in some aspects. The purpose of this paper is to improve the accuracy of credit assessment models.

In this paper, three different stages are used to improve the classification performance of LSTM, so that financial institutions can more accurately identify borrowers at risk of default. The first approach is to use the K-Means-SMOTE algorithm to eliminate the imbalance within the class. In the second step, ResNet is used for feature extraction, and then two-layer LSTM is used for learning to strengthen the ability of neural networks to mine and utilize deep information. Finally, the model performance is improved by using the IDWPSO algorithm for optimization when debugging the neural network.

On two unbalanced datasets (category ratios of 700:1 and 3:1 respectively), the multi-stage improved model was compared with ten other models using accuracy, precision, specificity, recall, G-measure, F-measure and the nonparametric Wilcoxon test. It was demonstrated that the multi-stage improved model showed a more significant advantage in evaluating the imbalanced credit dataset.

In this paper, the parameters of the ResNet-LSTM hybrid neural network, which can fully mine and utilize the deep information, are tuned by an innovative intelligent optimization algorithm to strengthen the classification performance of the model.