Search results

The purpose of this paper is to apply the Peridynamic differential operator (PDDO) to incompressible inviscid fluid flow with moving boundaries. Based on the potential flow theory, a Lagrangian formulation is used to cope with non-linear free-surface waves of sloshing water in 2D and 3D rectangular and square tanks.

In fact, PDDO recasts the local differentiation operator through a nonlocal integration scheme. This makes the method capable of determining the derivatives of a field variable, more precisely than direct differentiation, when jump discontinuities or gradient singularities come into the picture. The issue of gradient singularity can be found in tanks containing vertical/horizontal baffles.

The application of PDDO helps to obtain the velocity field with a high accuracy at each time step that leads to a suitable geometry updating for the procedure. Domain/boundary nodes are updated by using a second-order finite difference time algorithm. The method is applied to the solution of different examples including tanks with baffles. The accuracy of the method is scrutinized by comparing the numerical results with analytical, numerical and experimental results available in the literature.

Based on the investigations, PDDO can be considered a reliable and suitable approach to cope with sloshing problems in tanks. The paper paves the way to apply the method for a wider range of problems such as compressible fluid flow.

This chapter examines spillover effects of global monetary shocks on lending by foreign banks in an emerging country, South Korea. Foreign banks play a significant role by providing additional domestic credit and foreign currency liquidity and directing international capital flows via the banking sector. Using macroeconomic and banking data for the period of 2000Q1–2016Q2, the authors present evidence that foreign bank branches in Korea have responded in providing their foreign currency loans with one-quarter (three months) time lag to changes in monetary policies in their home countries (mainly, the United States and the Euro area). This short-run spillover effect of monetary policy shocks from the home countries to foreign banks in Korea seems consistent with the main findings from our bank-level data analysis. This chapter also discusses useful policy implications.

The purpose of this paper is to propose a similarity-based approach to accurately retrieve reference solutions for the intelligent handling of online complaints.

This approach uses a case-based reasoning framework and firstly formalizes existing online complaints and their solutions, new online complaints, and complaint products, problems and content as source cases, target cases and distinctive features of each case, respectively. Then the process of using existing word-level, sense-level and text-level measures to assess the similarities between complaint products, problems and contents is explained. Based on these similarities, a measure with high accuracy in assessing the overall similarity between cases is designed. The effectiveness of the approach is evaluated by numerical and empirical experiments.

The evaluation results show that a measure simultaneously considering the features of similarity at word, sense and text levels can obtain higher accuracy than those measures that consider only one level feature of similarity; and that the designed measure is more accurate than all of its linear combinations.

The approach offers a feasible way to reduce manual intervention in online complaint handling. Complaint products, problems and content should be synthetically considered when handling an online complaint. The designed procedure of the measure with high accuracy can be applied in other applications that consider multiple similarity features or linguistic levels.

A method for linearly combining the similarities at all linguistic levels to accurately assess the overall similarities between online complaint cases is presented. This method is experimentally verified to be helpful to improve the accuracy of online complaint case retrieval. This is the first study that considers the accuracy of the similarity measures for online complaint case retrieval.

As the quality of the environment decreases, enterprises and consumers' awareness of environmental protection is constantly improving. More and more enterprises begin to increase their investment in carbon emission reduction and attract environmentally friendly consumers to buy low-carbon products through advertising. The purpose of this paper is to utilize a realistic differential game model to provide dynamic carbon emission reduction strategies, advertising strategies and cooperation methods for complex supply chain members from a long-term perspective.

This paper uses the extend Vidale-Wolfe model (V-W model) to discuss the dynamic joint emission reduction strategy in the supply chain.

(1) When consumers' awareness of environmental protection increases, on the whole, carbon emission reduction and profit of products show an upward trend. (2) From a long-term perspective, the manufacturer's advertising subsidy to one of the retailers is the best choice. If the strength of the two retailers is unbalanced, the manufacturer will choose to cooperate with the dominant retailer. (3) Advertising, as a marketing means for retailers to promote low-carbon products, can alleviate the adverse effects of prisoner's dilemma in a semi-cooperative state, but it cannot achieve the Pareto optimization result.

This paper focuses on the analysis of the situation that when the manufacturer is the leader and thinks that consumers are active advocates of low-carbon products.

The results of this paper can provide theoretical basis for the joint emission strategy of supply chain members in low-carbon environment.

Sufficient sample data are the necessary condition to ensure high reliability; however, there are relatively poor fatigue test data in the engineering, which affects fatigue life's prediction accuracy. Based on this, this research intends to analyze the fatigue data with small sample characteristics, and then realize the life assessment under different stress levels.

Firstly, the Bootstrap method and the principle of fatigue life percentile consistency are used to realize sample aggregation and information fusion. Secondly, the classical outlier detection algorithm (DBSCAN) is used to check the sample data. Then, based on the stress field intensity method, the influence of the non-uniform stress field near the notch root on the fatigue life is analyzed, and the calculation methods of the fatigue damage zone radius and the weighting function are revised. Finally, combined with Weibull distribution, a framework for assessing multiaxial low-cycle fatigue life has been developed.

The experimental data of Q355(D) material verified the model and compared it with the Yao’s stress field intensity method. The results show that the predictions of the model put forward in this research are all located within the double dispersion zone, with better prediction accuracies than the Yao’s stress field intensity method.

Aiming at the fatigue test data with small sample characteristics, this research has presented a new method of notch fatigue analysis based on the stress field intensity method, which is combined with the Weibull distribution to construct a low-cycle fatigue life analysis framework, to promote the development of multiaxial fatigue from experimental studies to practical engineering applications.

The purpose of this study is to investigate the deformation characteristics and failure modes of the right bank slope of Xiluodu Hydropower Station after excavation.

Micro-seismic monitoring technology is applied to obtain the microfracture information and study the internal damage evolution law of the slope rock mass. A numerical model for discontinuous deformation analysis (DDA) is established to analyse the deformation characteristics and failure mode of the slope. Micro-seismic monitoring and DDA can verify and supplement each other's results in the investigation of slope failure.

The results show that the slope has a downhill displacement along the weathered zone under natural conditions; the maximum resultant displacement at the monitoring point is 380 mm. The micro-seismic events are concentrated in an area located 30–100 m horizontally away from the slope surface and at an elevation of 390–470 m. The distribution of these micro-seismic events is consistent with the location of the unloading and weathered zones; it is the same as the DDA simulation result.

The study is anticipated to be used as reference for the stability analysis of rock slopes. By combining the continuous (micro-seismic monitoring technology) and discontinuous (DDA) methods, the entire process starting from the gradual accumulation of internal rock micro-damage to the macroscopic discontinuous deformation and failure of the slope can be investigated.

The three-dimensional porous scaffold is an important concept in tissue engineering and helps to restore or regenerate a damaged tissue. Additive manufacturing (AM) technology makes the production of custom-designed scaffolds possible. However, modeling scaffolds with intricate architecture and customized pore size and spatial distribution presents a challenge. This paper aims to achieve coupling control of pore size and spatial distribution in bone scaffolds for AM.

First, the proposed method assumes that pore size and spatial distribution have already been transformed from the requirements of scaffolds as inputs. Second, the structural characteristics of scaffolds are explicitly correlated with an all-hexahedron meshing method for scaffold design so that the average pore size could be controlled. Third, the highly coupled internal mesh vertices are adjusted based on a random strategy so that the pore size and spatial distribution conform to their respective desired values. Fourth, after the adjustment, the unit pore cell based on a triply periodic minimal surface was mapped into the hexahedrons through a shape function, thereby ensuring the interconnectivity of the porous scaffold.

The case studies of three bone scaffolds demonstrate that the proposed approach is feasible and effective to simultaneously control pore size and spatial distribution in porous scaffolds.

The proposed method may make it more flexible to design scaffolds with controllable internal pore architecture for AM.

In the control approach, the highly coupled mesh vertices are adjusted through a random strategy, which can determine the moving direction and range of a vertex dynamically and biasedly, thus ensuring the feasibility and efficiency of the proposed method.