Search results

The purpose of this paper is to investigate thermally and hydrodynamically fully developed convection in a duct of rectangular cross-section containing a porous medium and fluid layer.

The Darcy–Brinkman–Forchheimer flow model is adopted. A finite difference method of second-order accuracy with the Southwell-over-relaxation method is deployed to solve the non-dimensional momentum and energy conservation equations under physically robust boundary conditions.

It is found that the presence of porous structure and different immiscible fluids exert a significant impact on controlling the flow. Graphical results for the influence of the governing parameters i.e. Grashof number, Darcy number, porous media inertia parameter, Brinkman number and ratios of viscosities, thermal expansion and thermal conductivity parameters on the velocity and temperature fields are presented. The volumetric flow rate, skin friction and rate of heat transfer at the left and right walls of the duct are also provided in tabular form. The numerical solutions obtained are validated with the published study and excellent agreement is attained.

To the author’s best knowledge this study original in developing the numerical code using FORTRAN to assess the fluid properties for immiscible fluids. The study is relevant to geothermal energy systems, thermal insulation systems, resin flow modeling for liquid composite molding processes and hybrid solar collectors.

The purpose of this study is a numerical analysis of steady-state heat transfer behavior of couple-stress nanofluid sandwiched between viscous fluids. It should be noted that this research deals with the development of a cooling system for the electronic devices.

Stokes model is used to define the couple-stress fluid and the single-phase nanofluid model is used to define the nanofluid transport processes. The fluids in all regions are assumed to be incompressible, immiscible and the transport properties in all the three layers are assumed to be constant. The governing coupled linear ordinary differential equations are made dimensionless by using appropriate fundamental quantities. The exact solutions obtained for the velocity and temperature fields are evaluated numerically for various model parameters.

The results are demonstrated using different types of nanoparticles such as copper, silver, silicon oxide (SiO₂), titanium oxide (TiO₂) and diamond. The investigations are carried out using copper–water nanofluid for different values of couple-stress parameter a with a range of 0 = a = 12, solid volume fraction ϕ with a range of 0.0 ≤ ϕ ≤ 0.05, Eckert number Ec with a range of 0.001 ≤ Ec ≤ 6 and Prandtl number Pr with a range of 0.001 ≤ Pr ≤ 6. It was found that the Nusselt number increases by increasing the couple stress parameter, Eckert number and Prandtl number and it decreases with a growth of the solid volume fraction parameter. It was also observed that using SiO₂–water nanofluid, the optimal Nusselt number is obtained. Further, using copper, silver, diamond and TiO₂, nanoparticles and water as a base fluid does not show any significant changes in the rate of heat transfer. The couple-stress parameter enhances the velocity and temperature fields whereas the solid volume fraction suppresses the flow field for both Newtonian and couple-stress fluid.

The originality of this work is to analyze the heat transfer behavior of couple-stress nanofluid sandwiched between viscous fluids. The results would benefit scientists and engineers to become familiar with the analysis of convective heat transfer and flow structures in nanofluids and the way to predict the heat transfer rate in advanced technical systems, in industrial sectors including transportation, power generation, chemical sectors, electronics, etc.

The flow phenomenon of particle image velocimetry has revealed the transition process of the complex multi-scale vortex between the boundary layer and mainstream region. Nonetheless, present computational fluid dynamics methods inadequately distinguish the discernable flows in detail. A multi-physical field coupling model, which was applied in rotor-stator fluid machinery (Umavathi, 2015; Syawitri et al., 2020), was put forward to ensure the identification of multi-scale vortexes and the improvement of performance prediction in torque converter.

A newly-developed multi-physical field simulation framework that coupled the scale-resolving simulation method with a dynamic modified viscosity coefficient was proposed to comparatively investigate the influence of energy exchange on thermal and flow characteristics and the description of the flow field in detail.

Regardless of whether quantitative or qualitative, its description ability on turbulence statistics, pressure-streamline, vortex structure and eddy viscosity ratio were visually experimentally and numerically analyzed. The results revealed that the modification of transmission medium viscous can identify flows more exactly between the viscous sublayer and outer boundary layer. Compared with RANS and large eddy simulation, a stress-blended eddy simulation model with a dynamic modified viscosity coefficient, which was further used to achieve blending on the stress level, can effectively solve the calculating problem of the transition region between the near-wall boundary layer and mainstream region.

This indeed provides an excellent description of the transient flow field and vortex structure in different physical flow states. Furthermore, the experimental data has proven that the maximum error of the external performance prediction was less than 4%.

An improved model was applied to simulate and analyze the flow mechanism through the evolution of vortex structures in a working chamber, to deepen the designer with a fundamental understanding on how to reduce flow losses and flow non-uniformity in manufacturing.

The purpose of this paper is to consider the problem of fully developed laminar mixed convection flow of a couple stress fluid in a vertical channel with the third-kind boundary conditions in the presence or absence of heat source/sink effect.

Through proper choice of dimensionless variables, the governing equations are developed. These governing equations are solved analytically by the differential transform method and numerically by the Runge–Kutta shooting method. Analytical solutions for the velocity and temperature profiles for heat generation and absorption of the problem are reported.

The mass flow rate and Nusselt numbers at both the left and right channel walls on mixed convection parameter, Brinkman number, couple stress parameter and heat generation/absorption parameter for equal and unequal Biot numbers are presented. Favorable comparisons of special cases with previously published work are obtained. It is found that velocity, temperature, mass flow rate and Nusselt number decrease with couple stress parameter and increase with mixed convection parameter and Brinkman number.

The work done in this paper is not done earlier to the authors’ knowledge. This is the first paper in which the sixth-order differential equation is solved using the semi-numerical method, which is a differential method.

The purpose of this paper is to examine the flow, heat transfer and entropy generation characteristics for an inclined channel of two immiscible micropolar fluids.

The flow region consists of two zones, the flow of the heavier fluid taking place in the lower zone. The flow is assumed to be governed by Eringen’s micropolar fluid flow equation. The resulting governing equations are then solved using the homotopy analysis method.

The following findings are concluded: first, the entropy generation rate is more near the plates in both the zones as compared to that of the interface. This indicates that the friction due to surface on the fluids increases entropy generation rate. Second, the entropy generation rate is more near the plate in Zone I than that of Zone II. This may be due to the fact that the fluid in Zone I is more viscous. This indicates the more the viscosity of the fluid is, the more the entropy generation. Third, Bejan number is the maximum at the interface of the fluids. This indicates that the amount of exergy (available energy) is maximum and irreversibility is minimized at the interface between the fluids. Fourth, as micropolarity increases, entropy generation rate near the plates decreases and irreversibility decreases. This indicates an important industrial application for micropolar fluids to use them as a good lubricant.

The problem is original as no work has been reported on entropy generation in an inclined channel with two immiscible micropolar fluids.

This study aims to numerically study the buoyant convective flow of two different nanofluids in a porous annular domain. A uniformly heated inner cylinder, cooled outer cylindrical boundary and adiabatic horizontal surfaces are considered because of many industrial applications of this geometry. The analysis also addresses the comparative study of different porous media models governing fluid flow and heat transport.

The finite difference method has been used in the current simulation work to obtain the numerical solution of coupled partial differential equations. In particular, the alternating direction implicit method is used for solving transient equations, and the successive line over relaxation iterative method is used to solve time-independent equation by choosing an optimum value for relaxation parameter. Simpson’s rule is adopted to estimate average Nusselt number involving numerical integration. Various grid sensitivity checks have been performed to assess the sufficiency of grid size to obtain accurate results. In this analysis, a general porous media model has been considered, and a comparative study between three different models has been investigated.

Numerical simulations are performed for different combinations of the control parameters and interesting results are obtained. It has been found that the an increase in Darcy and Rayleigh numbers enhances the thermal transport rate and strengthens the nanofluid movement in porous annulus. Also, higher flow circulation rate and thermal transport has been detected for Darcy model as compared to non-Darcy models. Thermal mixing could be enhanced by considering a non-Darcy model.

The present results could be effectively used in many practical applications under the limiting conditions of two-dimensionality and axi-symmetry conditions. The only drawback of the current study is it does not include the three-dimensional effects.

The results could be used as a first-hand information for the design of any thermal systems. This will help the design engineer to have fewer trial-and-run cases for the new design.

A pioneering numerical investigation on the buoyant convective flow of two different nanofluids in an annular porous domain has been carried out by using a general Darcy–Brinkman–Forchheimer model to govern fluid flow in porous matrix. The results obtained from current investigation are novel and original, with numerous practical applications of nanofluid saturated porous annular enclosure in the modern industry.

The purpose of this paper is to investigate the effect of exponential viscosity-temperature relation, exponential thermal conductivity-temperature relation and the combined effects of variable viscosity and variable thermal conductivity on steady free convection flow of viscous incompressible fluid in a vertical channel.

The governing equations are solved analytically using regular perturbation method. The analytical solutions are valid for small variations of buoyancy parameter and the solutions are found up to first order for variable viscosity. Since the analytical solutions have a restriction on the values of perturbation parameter and also on the higher order solutions, the authors resort to numerical method which is Runge-Kutta fourth order method.

The skin friction coefficient and the Nusselt number at both the plates are derived, discussed and their numerical values for various values of physical parameters are presented in tables. It is found that an increase in the variable viscosity enhances the flow and heat transfer, whereas an increase in the variable thermal conductivity suppresses the flow and heat transfer for variable viscosity, variable thermal conductivity and their combined effect.

This research is relatively original as, to the best of the authors’ knowledge, not much work is done on the considered problem with variable properties.

The purpose of this paper is to investigate the heat transfer of laminar and turbulent pulsating Al203/water nanofluid flow in a two-dimensional channel. In the laminar flow range, with increasing Reynolds number (Re), the velocity gradient is increased. Also, the Nusselt number (Nu) is increased, which causes increase in the overall heat transfer rate. Additionally, in the change of flow regime from laminar to turbulent, average thermal flux and pulsation range are increased. Also, the effect of different percentage of Al₂O₃/water nanofluid is investigated. The results show that the addition of nanofluids improve thermal performance in channel, but the using of nanofluid causes a pressure drop in the channel.

The pulsatile flow and heat transfer in a two-dimensional channel were investigated.

The numerical results show that the Al₂O₃/Water nanofluid has a significant effect on the thermal properties of the different flows (laminar and turbulent) and the average thermal flux and pulsation ranges are increased in the change of flow regime from laminar to turbulent. Also, the addition of nanofluid improves thermal performance in channels.

The originality of this work lies in proposing a numerical analysis of heat transfer of pulsating Al₂O₃/Water nanofluid flow -with different percentages- in the two-dimensional channel while the flow regime change from laminar to turbulent.

The electromagnetic field and cooling system of a high power switched reluctance motor (SRM) are studied numerically. The geometry of the motor and its main components are established using a computer-aided design software in the actual size. This study aims to evaluate the resulting thermal losses using the electromagnetic analysis of the motor.

In the electromagnetic analysis, the Joule’s loss in the copper wires of the coil windings and the iron losses (the eddy currents loss and the hysteresis loss) are considered. The flow and heat transfer model for the thermal analysis of the motor including the conduction in solid parts and convection in the fluid part is introduced. The magnetic losses are imported into the thermal analysis model in the form of internal heat generation in motor components. Several cooling system approaches were introduced, such as natural convection cooling, natural convection cooling with various types of fins over the motor casing, forced conviction air-cooled cooling system using a mounted fan, casing surface with and without heat sinks, liquid-cooled cooling system using the water in a channel shell and a hybrid air-cooled and liquid-cooled cooling system.

The results of the electromagnetics analysis show that the low rotational speed of the motor induces higher currents in coil windings, which in turn, it causes higher copper losses in SRM coil windings. For higher rotational speed of SRM, the core loss is higher than the copper loss is in SRM due to the higher frequency. An air-cooled cooling system is used for cooling of SRM. The results reveal when the rotational speed is at 4,000 rpm, the coil loss would be at the maximum value. Therefore, the coil temperature is about 197.9°C, which is higher than the tolerated standard temperature insulation material. Hence, the air-cooled system cannot reduce the temperature to the safe temperature limitation of the motor and guarantee the safe operation of SRM. Thus, a hybrid system of both air-cooled and liquid-cooled cooling system with mounting fins at the outer surface of the casing is proposed. The hybrid system with the liquid flow of Re = 1,500 provides a cooling power capable of safe operation of the motor at 117.2°C, which is adequate for standard insulation material grade E.

The electromagnetic field and cooling system of a high power SRM in the presence of a mounted fan at the rear of the motor are analyzed. The thermal analysis is performed for both of the air-cooled and liquid-cooled cooling systems to meet the cooling demands of the motor for the first time.

Microfluidics is one of the extensive elaborated technologies in thermal and engineering fields due to its wide range of applications, such as micro heat exchangers, micro mixture and microchannel heat sinks, which is used to develop a large number of microscopic devices and systems. Enhancement of thermal energy using verity of nanoliquids is one of the challenges in these applications of microfluidics. Therefore, using single wall carbon nanotubes for enhancement of thermal energy in microchannel is the main purpose of this study. Hall effect of natural convection flow in a vertical channel with slip and temperature jump condition is considered. The impacts of radiative heat flux, uniform heat source/sink, viscous dissipation and joule heating are also taken into account.

Suitable non-dimension variables are applied to the governing equations to reduce the system into ordinary differential equations. The reduced nonlinear system is then solved numerically using Runge–Kutta–Fehlberg fourth–fifth-order method along with shooting technique. The impact of different pertinent parameters on numerical solutions of primary velocity, secondary velocity, temperature, entropy generation and Bejan number is comprehensively discussed in detail. Also, the obtained numerical results are compared with existing one which perfectly found to be in good agreement.

It is established that, with the aspects of Joule heating, viscous dissipation, radiative heat flux and uniform heat source/sink, the production in the entropy can be improved. Further, it is found that the increasing ratio of wall ambient temperature difference and nanoparticle volume fraction leads to enhance the entropy generation. The same effect reverses with increasing values of fluid wall interaction parameter (FWIP) and rare faction. The irreversibility ratio enhances with larger values of nanoparticle volume fraction and decelerates with increment values of FWIP.

The impact of single wall carbon nanoliquid in a vertical channel flow by using radiative heat flux, heat source/sink, joule heating and viscous dissipation is first time investigated. Further, the influence of Hall current is explored in detail.