Search results

Gives introductory remarks about chapter 1 of this group of 31 papers, from ISEF 1999 Proceedings, in the methodologies for field analysis, in the electromagnetic community. Observes that computer package implementation theory contributes to clarification. Discusses the areas covered by some of the papers ‐ such as artificial intelligence using fuzzy logic. Includes applications such as permanent magnets and looks at eddy current problems. States the finite element method is currently the most popular method used for field computation. Closes by pointing out the amalgam of topics.

Discusses the 27 papers in ISEF 1999 Proceedings on the subject of electromagnetisms. States the groups of papers cover such subjects within the discipline as: induction machines; reluctance motors; PM motors; transformers and reactors; and special problems and applications. Debates all of these in great detail and itemizes each with greater in‐depth discussion of the various technical applications and areas. Concludes that the recommendations made should be adhered to.

The electromagnetic field and cooling system of a high power switched reluctance motor (SRM) are studied numerically. The geometry of the motor and its main components are established using a computer-aided design software in the actual size. This study aims to evaluate the resulting thermal losses using the electromagnetic analysis of the motor.

In the electromagnetic analysis, the Joule’s loss in the copper wires of the coil windings and the iron losses (the eddy currents loss and the hysteresis loss) are considered. The flow and heat transfer model for the thermal analysis of the motor including the conduction in solid parts and convection in the fluid part is introduced. The magnetic losses are imported into the thermal analysis model in the form of internal heat generation in motor components. Several cooling system approaches were introduced, such as natural convection cooling, natural convection cooling with various types of fins over the motor casing, forced conviction air-cooled cooling system using a mounted fan, casing surface with and without heat sinks, liquid-cooled cooling system using the water in a channel shell and a hybrid air-cooled and liquid-cooled cooling system.

The results of the electromagnetics analysis show that the low rotational speed of the motor induces higher currents in coil windings, which in turn, it causes higher copper losses in SRM coil windings. For higher rotational speed of SRM, the core loss is higher than the copper loss is in SRM due to the higher frequency. An air-cooled cooling system is used for cooling of SRM. The results reveal when the rotational speed is at 4,000 rpm, the coil loss would be at the maximum value. Therefore, the coil temperature is about 197.9°C, which is higher than the tolerated standard temperature insulation material. Hence, the air-cooled system cannot reduce the temperature to the safe temperature limitation of the motor and guarantee the safe operation of SRM. Thus, a hybrid system of both air-cooled and liquid-cooled cooling system with mounting fins at the outer surface of the casing is proposed. The hybrid system with the liquid flow of Re = 1,500 provides a cooling power capable of safe operation of the motor at 117.2°C, which is adequate for standard insulation material grade E.

The electromagnetic field and cooling system of a high power SRM in the presence of a mounted fan at the rear of the motor are analyzed. The thermal analysis is performed for both of the air-cooled and liquid-cooled cooling systems to meet the cooling demands of the motor for the first time.

The purpose of this paper is to supply a numerical analysis tool to solve eddy currents induced in nonlinear materials such as steel by boundary element method (BEM), and then apply it to design and analysis of power devices.

Utilizing integral formulas derived on the basis of rapid attenuation of the electromagnetic fields, the paper formulates eddy currents in steel. In the formulation, nonlinear terms are regarded as virtual sources, which are improved iteratively with the electromagnetic fields on the surface. The periodic electromagnetic fields are expanded in Fourier series and each harmonic is analyzed by BEM. The surface and internal electromagnetic fields are obtained numerically one after the other until convergence by the Newton‐Raphson method.

It is confirmed that this approach gives accurate solutions with meshes much larger than the skin depth and therefore is adequate to apply to a large‐scale application.

The eddy current is formulated by utilizing the impedance boundary condition in order to meet a large‐scale application, and so solutions near the edge are poor. In the case of better solutions being required, some modifications are necessary.

To lessen computer memory consumption, the parallel component of the currents to the steel surface is analyzed as a 2D problem and the normal component is obtained from the parallel component. One 2D equation for one analyzing region is discretized by dividing the region into layers adaptively and then solved. Next, another is solved sequentially. This method gives a compatible numerical analysis tool with finite element method.

The paper seeks to present a methodology of computer simulation of 3D transient electromagnetic fields, losses and forces due to negative sequence currents in fragments of large synchronous turbogenerator rotors. The methodology allows for the preparation of initial data for further computations of thermal and mechanical behaviour of rotors.

The governing equations for 3D negative sequence transient electromagnetic fields with the Coulomb gauge using magnetic vector potential and scalar electric potential A, V – A are solved by the nodal finite element method in a Cartesian coordinate system moving synchronously with the rotor.

The presented methodology of 3D transient electromagnetic phenomena computation seems to be effective because the electromagnetic field in the rotor of a synchronous generator is generally three dimensional, and therefore 2D field‐computation approaches and software are not able to simulate intrinsically 3D electromagnetic processes in turbogenerator rotors.

Currently it is difficult to carry out accurate numerical simulation of 3D transient electromagnetic fields and therefore losses and forces within the whole structure of the rotor because of the resulting huge computational expenses. This paper is devoted to the finite element analysis of electromagnetic fields, losses and forces in separate structural parts of the rotor. As an example of practical utilization of the developed technique, the computer simulation of electromagnetic phenomena in junctions of nonmagnetic rotor slot wedges of a 300 MVA class synchronous turbogenerator is carried out.

The methodology can successfully be used during the design process of modern large synchronous turbogenerators.

This paper presents numerical analysis of intrinsically 3D transient electromagnetic phenomena in large turbogenerator rotors.

The purpose of this paper is to present a 3D finite element model of the electromagnetic fields in an AC three‐phase electric arc furnace (EAF). The model includes the electrodes, arcs, and molten bath.

The electromagnetic field in terms of time in AC arc is also modeled, utilizing a 3D finite element method (3D FEM). The arc is supposed to be an electro‐thermal unit with electrical power as input and thermal power as output. The average Joule power, calculated during the transient electromagnetic analysis of the AC arc furnace, can be used as a thermal source for the thermal analysis of the inner part of furnace. Then, by attention to different mechanisms of heat transfer in the furnace (convection and radiation from arc to bath, radiation from arc to the inner part of furnace and radiation from the bath to the sidewall and roof panel of the furnace), the temperature distribution in different parts of the furnace is calculated. The thermal model consists of the roof and sidewall panels, electrodes, bath, refractory, and arc. The thermal problem is solved in the steady state for the furnace without slag and with different depths of slag.

Current density, voltage and magnetic field intensity in the arcs, molten bath and electrodes are predicted as a result of applying the three‐phase AC voltages to the EAF. The temperature distribution in different parts of the furnace is also evaluated as a result of the electromagnetic field analysis.

This paper considers an ideal condition for the AC arc. Non‐linearity of the arc during the melting, which leads to power quality disturbances, is not considered. In most prior researches on the electrical arc furnace, a non‐linear circuit model is usually used for calculation of power quality phenomena distributions. In this paper, the FEM is used instead of non‐linear circuits, and calculated voltage and current densities in the linear arc model. The FEM results directly depend on the physical properties considered for the arc.

Steady‐state arc shapes, based on the Bowman model, are used to calculate and evaluate the geometry of the arc in a real and practical three‐phase AC arc furnace. A new approach to modeling AC arcs is developed, assuming that the instantaneous geometry of the AC arc at any time is constant and is similar to the geometry of a DC arc with the root mean square value of the current waveform of the AC arc. A time‐stepping 3D FEM is utilized to calculate the electromagnetic field in the AC arc as a function of time.

The purpose of this paper is to present the plan to develop the known algorithm for thermal and electromagnetic coupled problem calculation. This is used for three‐phase induction motor (IM) on nominal load. An additional purpose is verification empiric expressions of the heat transfer and equivalent thermal conductivity coefficients for external faces and air zones in analysed motor taken from literature.

The numerical investigations proposed in this paper are based on 3D finite element models for thermal and electromagnetic fields analysis. Electromagnetic analysis includes iron core losses. It gives additional heat sources to thermal analysis. Heat transfer and equivalent thermal conductivity coefficients are assessed applying empiric expressions. Thermal model is experimentally validated.

The results of calculations and experimental test shows that heat transfer coefficient for external zones taken from literature does not guarantee the equal accuracy of the distribution of the temperature in all volume of the machine.

Taken from literature, empirical equations do not give correct values of heat transfer coefficient. It states ways to go further in the evaluation of heat transfer coefficients.

This paper presents modelling methodology of 3D transient thermal field coupled with electromagnetic field applied in three‐phase IM at rated load conditions.

This paper aims to present the plan to develop the known algorithm for thermal and electromagnetic coupled problem calculation. This is used for a one‐phase induction motor with locked rotor for nominal and lowered voltage excitation values. It also aims to prepare a calculating method for the average heat transfer coefficient for natural convection from the induction motor housing external face.

The numerical investigations proposed are based on 3D finite element models for thermal and electromagnetic fields analysis and 3D volume element model for average heat transfer coefficient calculations. The thermal model is experimentally validated.

The paper provides a numerical method to calculate average heat transfer coefficient for the induction motor housing external faces. This coefficient is shown as a temperature function. Temperature variations in the various parts of the induction motor with locked rotor are calculated. The calculation results are compared with the measurement results.

The average heat transfer coefficient is calculated for a limited range of temperature and for the natural convection case. Electromagnetic field analysis does not include losses in the motor core. These losses could be included in the thermal and electromagnetic fields coupled calculation problem as an additional heat source for the thermal field.

The paper presents a 3D transient thermal field and electromagnetic field coupled problem and proposes a method for calculating the average heat transfer coefficient of natural convection from the housing external face of the induction motor with a locked rotor.

The purposes of this paper are to numerically analyse the distribution of the electromagnetic field in the electromagnetic device wherein a high-speed unit exists and to develop a strong tool to analyse the evolution of an electromagnetic field tangled with moving parts.

The precise integration time domain (PITD) method and parameter weighted averaging approximation scheme.

It is shown that that the electromagnetic field in the device is significantly affected by the velocity of the moving unit and the parameters of the base material. The computation resources of the proposed method are saved and the efficiency is enhanced.

The parameter approximation (PA)-PITD method can be an effective and efficient time domain method to analyse the evolution of the electromagnetic field in electromagnetic devices with moving parts and similar problems.

This paper aims to propose and establish a set of new benchmark models to investigate and confidently validate the modeling and prediction of total stray-field loss inside magnetic and non-magnetic components under harmonics-direct current (HDC) hybrid excitations. As a new member-set (P21^e) of the testing electromagnetic analysis methods Problem 21 Family, the focus is on efficient analysis methods and accurate material property modeling under complex excitations.

This P21^e-based benchmarking covers the design of new benchmark models with magnetic flux compensation, the establishment of a new benchmark measurement system with HDC hybrid excitation, the formulation of the testing program (such as defined Cases I–V) and the measurement and prediction of material properties under HDC hybrid excitations, to test electromagnetic analysis methods and finite element (FE) computation models and investigate the electromagnetic behavior of typical magnetic and electromagnetic shields in electrical equipment.

The updated Problem 21 Family (V.2021) can now be used to investigate and validate the total power loss and the different shielding performance of magnetic and electromagnetic shields under various HDC hybrid excitations, including the different spatial distributions of the same excitation parameters. The new member-set (P21^e) with magnetic flux compensation can experimentally determine the total power loss inside the load-component, which helps to validate the numerical modeling and simulation with confidence. The additional iron loss inside the laminated sheets caused by the magnetic flux normal to the laminations must be correctly modeled and predicted during the design and analysis. It is also observed that the magnetic properties (B27R090) measured in the rolling and transverse directions with different direct current (DC) biasing magnetic field are quite different from each other.

The future benchmarking target is to study the effects of stronger HDC hybrid excitations on the internal loss behavior and the microstructure of magnetic load components.

This paper proposes a new extension of Problem 21 Family (1993–2021) with the upgraded excitation, involving multi-harmonics and DC bias. The alternating current (AC) and DC excitation can be applied at the two sides of the model’s load-component to avoid the adverse impact on the AC and DC power supply and investigate the effect of different AC and DC hybrid patterns on the total loss inside the load-component. The overall effectiveness of numerical modeling and simulation is highlighted and achieved via combining the efficient electromagnetic analysis methods and solvers, the reliable material property modeling and prediction under complex excitations and the precise FE computation model using partition processing. The outcome of this project will be beneficial to large-scale and high-performance numerical modeling.