Search results

1 – 10 of over 4000
Per page
102050
Citations:
Loading...
Available. Content available
Article
Publication date: 1 August 1999

176

Abstract

Details

Microelectronics International, vol. 16 no. 2
Type: Research Article
ISSN: 1356-5362

Access Restricted. View access options
Article
Publication date: 1 December 1999

S. Zhang, J. De Baets and A. Van Calster

A flip chip on board technology fully compatible with current PCB facilities is reported. It used reflow soldering for chip attachment. It required electroless nickel/immersion…

270

Abstract

A flip chip on board technology fully compatible with current PCB facilities is reported. It used reflow soldering for chip attachment. It required electroless nickel/immersion gold finishing on the board pads as well as on the chip pads. A no‐clean solder paste was printed on the boards before chip placement. Thus, there was no requirement for solder deposition on the chip side. Assembly tests with various chip formats proved the feasibility of this technology. X‐ray inspection and cross‐sectioning revealed the good shape and alignment of the reflowed solder joints. The reliability of underfilled assemblies was studied by ‐40 to 125°C thermal cycling. This approach is especially suitable for prototype or low volume productions as it eliminates the solder bumping process on the chip side, which is usually performed on the wafer level.

Details

Microelectronics International, vol. 16 no. 3
Type: Research Article
ISSN: 1356-5362

Keywords

Access Restricted. View access options
Article
Publication date: 1 August 1999

I. Born, D. Detemmerman, M. Vrana, J. De Baets and A. Van Calster

For many years C‐MAC has used thick film technology in many electronic products for a large range of customer applications. A high degree of integration has been achievable…

187

Abstract

For many years C‐MAC has used thick film technology in many electronic products for a large range of customer applications. A high degree of integration has been achievable, together with high reliability. Recently, however, new materials have been developed allowing for a further miniaturization. This paper reports on the development of a multilayer technology, based on the combination of state‐of‐the‐art Fodel® materials with Diffusion Patterning™ dielectric and and standard thick film materials. The combination of such materials allows for the manufacture of high density products, addressing the present and future needs of many new applications. Besides the process technology for manufacturing the substrate, different assembly technologies like dip and reflow soldering and chip and wire bonding have been successfully investigated. In comparison to LTCC, this technology offers the possibility of using only a few layers, therefore allowing for faster product development, more flexibility during manufacturing and optimisation of cost.

Details

Microelectronics International, vol. 16 no. 2
Type: Research Article
ISSN: 1356-5362

Keywords

Access Restricted. View access options
Article
Publication date: 1 March 1990

Gwent Electronic Materials has won its third award under the Department of Trade and Industry's SMART competition scheme.

22

Abstract

Gwent Electronic Materials has won its third award under the Department of Trade and Industry's SMART competition scheme.

Details

Microelectronics International, vol. 7 no. 3
Type: Research Article
ISSN: 1356-5362

Access Restricted. View access options
Article
Publication date: 6 February 2009

Mario Gonzalez, Fabrice Axisa, Frederick Bossuyt, Yung‐Yu Hsu, Bart Vandevelde and Jan Vanfleteren

The purpose of this paper is to present an update on the progress of the design and reliability of stretchable interconnections for electronic circuits.

2143

Abstract

Purpose

The purpose of this paper is to present an update on the progress of the design and reliability of stretchable interconnections for electronic circuits.

Design/methodology/approach

Finite element modelling (FEM) is used to analyse the physical behaviour of stretchable interconnects under different loading conditions. The fatigue life of a copper interconnect embedded into a silicone matrix has been evaluated using the Coffin‐Manson relation and FEM.

Findings

The mechanical properties of the substrate and the design of the metal interconnection play an important role on the fatigue lifetime of circuit. In the case of copper embedded into a PDMS Sylgard 186, more than 2,500 tensile cycles have been observed for a periodic deformation of 10 per cent.

Research limitations/implications

Reliability results are limited and need further work to create a more accurate empirical model to estimate the lifetime of stretchable interconnections.

Originality/value

The combined use of FEM and experimental analysis enable a more reliable design of the stretchable metal interconnections. The proposed horseshoe design offers the benefit of reduced permanent damage during elongation.

Details

Circuit World, vol. 35 no. 1
Type: Research Article
ISSN: 0305-6120

Keywords

Access Restricted. View access options
Article
Publication date: 1 April 1998

Jo Lernout

A novel technology for a multichip module (MCM) on silicon is presented. The technology features the integration of a power and a ground plane, resulting in a five‐conductor layer…

233

Abstract

A novel technology for a multichip module (MCM) on silicon is presented. The technology features the integration of a power and a ground plane, resulting in a five‐conductor layer module, the use of the heavily (n+) doped Si as the ground plane for integrated decoupling capacitances, integrated low TCR NiCr resistors, low resistance (13mΩper square) TiW/Cu/TiW metallisation, high quality PECVD oxynitride (SiON) insulation layers, which are optimised to a low stress content, and a new wet‐dry etch technique for the vias. The module is able to handle 200MHz clock frequencies and, when carefully designed, can also be used for opto‐electronic interconnections in the GHz range. A test module for DC and HF characterisation has been designed and produced. Preliminary test results are presented.

Details

Microelectronics International, vol. 15 no. 1
Type: Research Article
ISSN: 1356-5362

Keywords

Access Restricted. View access options
Article
Publication date: 8 July 2022

Uzair Khan, Hikmat Ullah Khan, Saqib Iqbal and Hamza Munir

Image Processing is an emerging field that is used to extract information from images. In recent years, this field has received immense attention from researchers, especially in…

382

Abstract

Purpose

Image Processing is an emerging field that is used to extract information from images. In recent years, this field has received immense attention from researchers, especially in the research domains of object detection, Biomedical Imaging and Semantic segmentation. In this study, a bibliometric analysis of publications related to image processing in the Science Expanded Index Extended (SCI-Expanded) has been performed. Several parameters have been analyzed such as annual scientific production, citations per article, most cited documents, top 20 articles, most relevant authors, authors evaluation using y-index, top and most relevant sources (journals) and hot topics.

Design/methodology/approach

The Bibliographic data has been extracted from the Web of Science which is well known and the world's top database of bibliographic citations of multidisciplinary areas that covers the various journals of computer science, engineering, medical and social sciences.

Findings

The research work in image processing is meager in the past decade, however, from 2014 to 2019, it increases dramatically. Recently, the IEEE Access journal is the most relevant source with an average of 115 publications per year. The USA is most productive and its publications are highly cited while China comes in second place. Image Segmentation, Feature Extraction and Medical Image Processing are hot topics in recent years. The National Natural Science Foundation of China provides 8% of all funds for Image Processing. As Image Processing is now becoming one of the most critical fields, the research productivity has enhanced during the past five years and more work is done while the era of 2005–2013 was the area with the least amount of work in this area.

Originality/value

This research is novel in this regard that no previous research focuses on Bibliometric Analysis in the Image Processing domain, which is one of the hot research areas in computer science and engineering.

Access Restricted. View access options
Article
Publication date: 4 September 2017

Shan Cao, Faqing He and Jinwei Gao

Important reserves of oil and gas, which are left to be discovered and produced, are mainly concentrated in challenging locations and under severe conditions such as high pressure…

567

Abstract

Purpose

Important reserves of oil and gas, which are left to be discovered and produced, are mainly concentrated in challenging locations and under severe conditions such as high pressure (HP)/high temperature (HT). The presence of aggressive environments including H2S, CO2 and chlorides plus HP/HT causes a series of corrosion problems, which cost the oil industry billions of dollars a year. Thus, there is an increasing challenge for tubes (i.e. oil country tubular goods, for short, OCTG) used in producing oil and gas. The purpose of this study is to summarize different kinds of corrosion problems and their mitigation, to more efficiently protect OCTG from corrosion.

Design/methodology/approach

To effectively select proper mitigation methods, the mechanism of corrosion must be understood, which can be classified into four categories: sweet corrosion, sour corrosion, galvanic corrosion and microbiologically induced corrosion. Also, the effects of environmental and material factors on the corrosion rate are presented. Subsequently, current technology of mitigating these corrosion problems has been discussed, including the development of materials, application of chemical inhibitors and application of protective layers.

Findings

It is stressed that limits exist for each individual mitigation method; therefore, a careful balance between economic life of OCTG and safety in operation is required.

Originality/value

The main purpose of this essay is to give a brief review and detailed introduction and analysis about those technologies.

Details

Anti-Corrosion Methods and Materials, vol. 64 no. 5
Type: Research Article
ISSN: 0003-5599

Keywords

Access Restricted. View access options
Article
Publication date: 3 June 2021

Shuai Li, Zhencai Zhu, Hao Lu and Gang Shen

This paper aims to present a dynamic reliability model of scraper chains based on the fretting wear process and propose a reasonable structural optimization method.

354

Abstract

Purpose

This paper aims to present a dynamic reliability model of scraper chains based on the fretting wear process and propose a reasonable structural optimization method.

Design/methodology/approach

First, the dynamic tension of the scraper chain is modeled by considering the polygon effect of the scraper conveyor. Then, the numerical wear model of the scraper chain is established based on the tangential and radial fretting wear modes. The scraper chain wear process is introduced based on the diameter wear rate. Furthermore, the time-dependent reliability of scraper chains based on the fretting wear process is addressed by the third-moment saddlepoint approximation (TMSA) method. Finally, the scraper chain is optimized based on the reliability optimization design theory.

Findings

There is a correlation between the wear and the dynamic tension of the scraper conveyor. The unit sliding distance of fretting wear is affected by the dynamic tension of the scraper conveyor. The reliability estimation of the scraper chain with incomplete probability information is achieved by using the TMSA for the method needs only the first three statistical moments of the state variable. From the perspective of the chain drive system, the reliability-based optimal design of the scraper chain can effectively extend its service life and reduce its linear density.

Originality/value

The innovation of the work is that the physical model of the scraper chain wear is established based on the dynamic analysis of the scraper conveyor. And based on the physical model of wear, the time-dependent reliability and optimal design of scraper chains are carried out.

Details

Engineering Computations, vol. 38 no. 10
Type: Research Article
ISSN: 0264-4401

Keywords

Access Restricted. View access options
Article
Publication date: 1 June 1999

George K. Chacko

Gives an in depth view of the strategies pursued by the world’s leading chief executive officers in an attempt to provide guidance to new chief executives of today. Considers the…

10001

Abstract

Gives an in depth view of the strategies pursued by the world’s leading chief executive officers in an attempt to provide guidance to new chief executives of today. Considers the marketing strategies employed, together with the organizational structures used and looks at the universal concepts that can be applied to any product. Uses anecdotal evidence to formulate a number of theories which can be used to compare your company with the best in the world. Presents initial survival strategies and then looks at ways companies can broaden their boundaries through manipulation and choice. Covers a huge variety of case studies and examples together with a substantial question and answer section.

Details

Asia Pacific Journal of Marketing and Logistics, vol. 11 no. 2/3
Type: Research Article
ISSN: 1355-5855

Keywords

1 – 10 of over 4000
Per page
102050