Search results

This paper aims to examine the effect of Dufour and Soret diffusions on Al₂O₃-water nanofluid flow over a moving thin needle by using the Tiwari and Das model.

The governing equations are reduced to the similarity equations using similarity transformations. The resulting equations are programmed in Matlab software through the bvp4c solver to obtain their solutions. The features of the skin friction, heat transfer and mass transfer coefficients, as well as the velocity, temperature and concentration profiles for different values of the physical parameters, are analysed and discussed.

The non-uniqueness of the solutions is observed for a certain range of the physical parameters. The authors also notice that the bifurcation of the solutions occurs in which the needle moves toward the origin (λ < 0). It is discovered that the first branch solutions of the skin friction coefficient and the heat transfer coefficients increase, but the mass transfer coefficient decreases in the presence of nanoparticle. Additionally, the simultaneous effect of Dufour and Soret diffusions tends to enhance the heat transfer coefficient; however, dual behaviours are observed for the mass transfer coefficient. Further analysis shows that between the two solutions, only one of them is stable and thus physically reliable in the long run.

The problem of Al₂O₃-water nanofluid flow over a moving thin needle with Dufour and Soret effects are the important originality of the present study. Besides, the temporal stability of the dual solutions is examined for time.

In recent times, ternary hybrid nanofluid has garnered attention from scientist and researchers due to its improved thermal efficiency. This study aims to delve into the examination of ternary hybrid nanofluid (Al₂O₃–Cu–TiO₂/water), particularly concerning axisymmetric flow over a nonlinearly permeable stretching/shrinking disk. In addition, the investigation of convective boundary conditions and thermal radiation effects is also considered within the context of the described flow problem.

Mathematical formulations representing this problem are reduced into a set of ordinary differential equations (ODEs) using similarity transformation. The MATLAB boundary value problem solver is then used to solve the obtained set of ODEs. The impact of considered physical parameters such as suction parameter, radiation parameter, nonlinear parameter, nanoparticle volumetric concentration and Biot number on the flow profiles as well as the physical quantities is illustrated in graphical form.

The findings revealed the thermal flux for the nonlinearly shrinking disk is approximately 1.33%, significantly higher when compared to the linearly shrinking disk. Moreover, the existence of dual solutions attributed to the nonlinear stretching/shrinking disk is unveiled, with the first solution being identified as the stable and reliable solution through temporal stability analysis.

Understanding ternary hybrid nanofluid behavior and flow has applications in engineering, energy systems and materials research. This study may help develop and optimize nanofluid systems like heat exchangers and cooling systems.

The study of flow dynamics across nonlinear stretching/shrinking disk gains less attention compared to linear stretching/shrinking geometries. Many natural and industrial processes involve nonlinear changes in boundary shapes or sizes. Understanding flow dynamics over nonlinear shrinking/stretching disks is therefore essential for applications in various fields such as materials processing, biomedical engineering and environmental sciences. Hence, this study highlights the axisymmetric flow over a nonlinear stretching/shrinking disk using ternary hybrid nanofluid composed of alumina (Al₂O₃), copper (Cu) and titania (TiO₂). Besides, this study tackles a complex problem involving multiple factors such as suction, radiation and convective boundary conditions. Analyzing such complex systems can provide valuable insights into real-world phenomena where multiple factors interact.

This study aims to investigate the micropolar fluid flow through a moving flat plate containing CoFe₂O₄-TiO₂ hybrid nanoparticles with the substantial influence of thermophoresis particle deposition and viscous dissipation.

The partial differential equations are converted to the similarity equations of a particular form through the similarity variables. Numerical outcomes are computed by applying the built-in program bvp4c in MATLAB. The process of flow, heat and mass transfers phenomena are examined for several physical aspects such as the hybrid nanoparticles, micropolar parameter, the thermophoresis particle deposition and the viscous dissipation.

The friction factor, heat and mass transfer rates are higher with an increment of 1.4%, 2.2% and 1.4%, respectively, in the presence of the hybrid nanoparticles (with 2% volume fraction). However, they are declined because of the rise of the micropolar parameter. The imposition of viscous dissipation reduces the heat transfer rate, significantly. Meanwhile, thermophoresis particle deposition boosts the mass transfer. Multiple solutions are developed for a certain range of physical parameters. Lastly, the first solution is shown to be stable and reliable physically.

As far as the authors have concerned, no work on thermophoresis particle deposition of hybrid nanoparticles on micropolar flow through a moving flat plate with viscous dissipation effect has been reported in the literature. Most importantly, this current study reported the stability analysis of the non-unique solutions and, therefore, fills the gap of the study and contributes to new outcomes in this particular problem.

The purpose of this paper is to examine the axisymmetric flow and heat transfer of a hybrid nanofluid over a permeable biaxial stretching/shrinking sheet.

In this study, 0.1 solid volume fraction of alumina (Al₂O₃) is fixed, then consequently, various solid volume fractions of copper (Cu) are added into the mixture with water as the base fluid to form Cu-Al₂O₃/water hybrid nanofluid. The hybrid nanofluid equations are converted to the similarity equations by using the similarity transformation. The bvp4c solver, which is available in the Matlab software is used for solving the similarity equations numerically. The numerical results for selected values of the parameters are presented in tabular and graphical forms, and are discussed in detail.

It is found that dual solutions exist up to a certain value of the stretching/shrinking and suction parameters. The critical value λ_c < 0 for the existence of the dual solutions decreases as nanoparticle volume fractions for copper increase. The temporal stability analysis is performed to analyze the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.

The present problem is new, original with many important results for practical problems in the modern industry.

This study aims to explore the stagnation flow over a shrinking surface in a hybrid nanofluid consists of Al₂O₃ and Cu nanoparticles. Here, the flow is subjected to the magnetohydrodynamic (MHD) and the melting phenomenon effects.

The similarity variables are used to gain the similarity equations. These equations are solved via the bvp4c solver. The effects of several physical parameters on the flow and the thermal characteristics of the hybrid nanofluid are analysed and discussed. Later, the temporal stability analysis is used to determine the stability of the dual solutions obtained as time evolves.

Results show that two solutions are found for the limited range of the stretching/shrinking parameter λ, and then these solutions are terminated at λ=λc. The rise of the melting parameter Me from 0 to 2 contributes to enhance 109.63% of the local Nusselt number Rex-1/2Nux and 3.30% of the skin friction coefficient Rex1/2Cf. Contrarily, the values of Rex-1/2Nux and Rex1/2Cf decline by 25.04% and 5.58%, respectively, as the magnetic parameter Mg increases from 0 to 0.3. Additionally, Al₂O₃-Cu/water has the highest values of Rex1/2Cf and the lowest values of Rex-1/2Nux. Lastly, it is found that the first solution is physically stable as time evolves.

This paper considers the MHD stagnation point flow of a hybrid nanofluid over a shrinking surface with the melting phenomenon effects. Most importantly, it is shown that there exist dual solutions within a specific range of the physical parameters. Besides, the temporal stability of the solutions is also reported in this study. The finding can contribute to foresee the flow and thermal behaviours in industrial applications. Also, the suitable values of parameters can be determined to avoid misjudgement in flow and heat transfer analysis.

This paper aims to examine the Cu-Al2O3/water hybrid nanofluid flow over a shrinking sheet in the presence of the magnetic field and dust particles.

The governing partial differential equations for the two-phase flow of the hybrid nanofluid and the dust particles are reduced to ordinary differential equations using a similarity transformation. Then, these equations are solved using bvp4c in MATLAB software. The bvp4c solver is a finite-difference code that implements the three-stage Lobatto IIIa formula. The numerical results are gained for several values of the physical parameters. The effects of these parameters on the flow and the thermal characteristics of the hybrid nanofluid and the dust particles are analyzed and discussed. Later, the temporal stability analysis is used to determine the stability of the dual solutions obtained as time evolves.

The outcome shows that the flow is unlikely to exist unless satisfactory suction strength is imposed on the shrinking sheet. Besides, the heat transfer rate on the shrinking sheet decreases with the increase of . However, the increase in and lead to enhance the heat transfer rate. Two solutions are found, where the domain of the solutions is expanded with the rising of, and. Consequently, the boundary layer separation on the surface is delayed in the presence of these parameters. Implementing the temporal stability analysis, it is found that only one of the solutions is stable as time evolves.

The dusty fluid problem has been widely studied for the flow over a stretching sheet, but only limited findings can be found for the shrinking counterpart. Therefore, this study considers the problem of the dusty fluid flow over a shrinking sheet containing Cu-Al₂O₃/water hybrid nanofluid with the effect of the magnetic field. In fact, this is the first study to discover the dual solutions of the dusty hybrid nanofluid flow over a shrinking sheet. Also, further analysis shows that only one of the solutions is stable as time evolves.

This study aims to investigate the flow impinging on a stagnation point of a shrinking cylinder subjected to prescribed surface heat flux in Al₂O₃-Cu/water hybrid nanofluid.

Using similarity variables, the similarity equations are obtained and then solved using bvp4c in MATLAB. The effects of several physical parameters on the skin friction and heat transfer rate, as well as the velocity and temperature profiles are analysed and discussed.

The outcomes show that dual solutions are possible for the shrinking case, in the range λc<λ<−1, where λc is the bifurcation point of the solutions. Meanwhile, the solution is unique for λ≥−1. Besides, the boundary layer is detached on the surface at λc, where the value of λc is affected by the hybrid nanoparticle φhnf and the curvature parameter γ. Moreover, the friction and the heat transfer on the surface increase with the rising values φhnf and γ. Finally, the temporal stability analysis shows that the first solution is stable in the long run, whereas the second solution is not.

The present work considers the problem of stagnation point flow impinging on a shrinking cylinder containing Al₂O₃-Cu/water hybrid nanofluid, with prescribed surface heat flux. This paper shows that two solutions are obtained for the shrinking case. Further analysis shows that only one of the solutions is stable as time evolves.

This paper aims to examine the hybrid nanofluid flow towards a stagnation point on an exponentially stretching/shrinking vertical sheet with buoyancy effects.

Here, the authors consider copper (Cu) and alumina (Al₂O₃) as hybrid nanoparticles while water as the base fluid. The governing equations are reduced to the similarity equations using similarity transformations. The resulting equations are programmed in Matlab software through the bvp4c solver to obtain their solutions.

The authors found that the heat transfer rate is greater for Al₂O₃-Cu/water hybrid nanofluid if compared to Cu/water nanofluid. Besides, the non-uniqueness of the solutions is observed for certain physical parameters. The authors also notice that the bifurcation of the solutions occurs in the downward buoyant force and the shrinking regions. In addition, the first solution of the skin friction and heat transfer coefficients increase with the added hybrid nanoparticles and the mixed convection parameter. The temporal stability analysis shows that one of the solutions is stable as time evolves.

The present work is dealing with the problem of a mixed convection flow of a hybrid nanofluid towards a stagnation point on an exponentially stretching/shrinking vertical sheet, with the buoyancy effects is taken into consideration. The authors show that two solutions are obtained for a single value of parameter for both stretching and shrinking cases, as well as for both buoyancy aiding and opposing flows. A temporal stability analysis then shows that only one of the solutions is stable and physically reliable as time evolves.

This paper aims to analyse numerically the unsteady stagnation-point flow of Cu-Al₂O₃/H₂O hybrid nanofluid towards a radially shrinking Riga surface with thermal radiation.

The governing partial differential equations are transformed into a set of ordinary (similar) differential equations by applying appropriate transformations. The numerical computation of these equations including the stability analysis is conducted using the bvp4c solver.

Two solutions are possible within the allocated interval: shrinking parameter, unsteadiness decelerating parameter, electro-magneto-hydrodynamics (EMHD) parameter, nanoparticles volumetric concentration, radiation parameter and width parameter, whereas the stability analysis certifies that the first (upper branch) solution, which fulfills the boundary conditions is the physical/real solution. The EMHD parameter generated from the application of Riga plate enhances the skin friction coefficient as well as the heat transfer process. The width parameter d is also one of the factors in the deterioration of the skin friction coefficient and heat transfer rate. It is crucial to control the width parameter of the magnets and electrodes to obtain the desired outcome. The radiation parameter is not affecting the boundary layer separation because the critical values are unchanged. However, the addition of radiation and unsteadiness decelerating parameters boosts the thermal rate.

The results are novel and contribute to the discovery of the flow and thermal performance of the hybrid nanofluid subjected to a radially shrinking Riga plate. Besides, this work is beneficial to the other researchers and general audience from industries regarding the factors which contribute to the thermal enhancement of the working fluid.

This paper aims to investigate the radiation and magnetohydrodynamic effect on the flow toward a stagnation point of an exponentially shrinking sheet in a hybrid nanofluid.

The governing partial differential equations are transformed into a set of similarity equations and are then solved numerically using the boundary value problem solver, bvp4c, available in MATLAB software. The effects of several physical parameters on the flow and the thermal characteristics of the hybrid nanofluid are analyzed and discussed.

Numerical results clarify that the dual solutions arise for the shrinking case (λ < 0). The critical values expand for the stronger magnetic field. Besides, the skin friction and the heat transfer coefficients enhance with the rise of the magnetic field and the hybrid nanoparticles. The heat transfer rate increases by 10.11% for the nanofluid and 28.69% for the hybrid nanofluid compared to the regular fluid. In addition, the presence of radiation gives a higher heat transfer rate. Using the stability analysis, it is found that the first solution is stable, and the second solution is unstable, over time.

The stagnation point flow problem has been widely studied for the flow over a stretching sheet, but only limited findings can be found for the flow over a shrinking sheet. Therefore, the present study considers the problem of the stagnation point flow over a shrinking sheet in a Cu-Al₂O₃/water hybrid nanofluid with the effects of magnetic field and thermal radiation. The dual solutions of the hybrid nanofluid flow over a shrinking sheet are obtained. Further analysis shows that only one of the solutions is stable and thus physically reliable as time evolves.