In the manufacture of resistors with low TCR values it is found that difficulties start at TCR values of less than ±50 ppm/°C. This paper will show if ±50 ppm/°C is a realistic…
Abstract
In the manufacture of resistors with low TCR values it is found that difficulties start at TCR values of less than ±50 ppm/°C. This paper will show if ±50 ppm/°C is a realistic value for high volume production.
Robert Blancquaert, Miloš Somora, M.S. Vijayaraghavan and D.J. Lowrie
ISHM‐Benelux has recently set up a permanent secretariat at the following address:
The risks of botulism associated with low acid canned foods havebeen reduced to a minimum by ensuring that well‐designed heat processesare established. However, the development of…
Abstract
The risks of botulism associated with low acid canned foods have been reduced to a minimum by ensuring that well‐designed heat processes are established. However, the development of pasteurized products which are given only a mild heat treatment requires the consideration of several other factors which may be involved in the preservation procedures. Discusses the characteristics of growth and toxin production by Clostridium botulinum to illustrate the types of food products that may cause a risk of botulism if incorrectly preserved and to indicate the combinations of treatment that may be used to control this food‐borne hazard.
Details
Keywords
Anne-Karen Hueske and Caroline Aggestam Pontoppidan
During the last two decades, there has been increasing emphasis on higher education institutions as agents promoting and advancing sustainability. This chapter addresses how…
Abstract
During the last two decades, there has been increasing emphasis on higher education institutions as agents promoting and advancing sustainability. This chapter addresses how sustainability is integrated into management education at higher education institutions. It is based on a systematic literature review that teases out governance, education, research, outreach and campus operations (GEROCO) as key elements for embedding sustainability in management education. In addition, it identifies the important role of having an overall governing strategic direction that serves to anchor sustainability. The chapter highlights that sustainability and responsible management education initiatives are interconnected and are complex to embed through the university system.
Details
Keywords
Seyyed Mohammadreza Ayazi, Ali Zamani Babgohari and Mohammadreza Taghizadeh-Yazdi
Many European businesses are small and medium enterprises (SMEs), contributing significantly to the well-being of local economies and regions. Even so, SMEs face many challenges…
Abstract
Many European businesses are small and medium enterprises (SMEs), contributing significantly to the well-being of local economies and regions. Even so, SMEs face many challenges in fostering innovation and improving performance. Furthermore, the raw material consumption is increasing globally, necessitating the development of strategies that will reduce the number of raw materials extracted and imported while improving the sustainability of small and medium-sized businesses. Consequently, promoting circular economy (CE) strategies, such as industrial symbiosis (IS) partnerships, whereby waste products from other industries serve as a source of raw materials for companies, is critical. Identifying and analysing enablers or drivers that support IS collaborations among SMEs is necessary to achieve this goal. In this regard, the purpose of this study will explore the enablers of IS among SMEs considering sustainability dimensions (environmental, social and economic). As facing a decision-making (DM) problem, the multiple attribute decision-making (MADM) approach was applied in a hesitant fuzzy (HF) environment in this research to answer the research questions. In this regard, in phase 1, IS enablers were identified and extracted using a literature review and experts’ opinions. In phase 2, the hesitant fuzzy Delphi (HFD) method was implemented to screen and finalise the enablers identified. In phase 3, casual relations among final enablers were determined using the hesitant fuzzy ANP (HF-ANP) method. Finally, in phase 4, the relative importance of enablers was calculated using the hesitant fuzzy best–worst method (HF-BWM). Consequently, this study provided potential strategies for IS that can be implemented quickly and used by local authorities to support SMEs in achieving circular waste management.
Details
Keywords
Wissam Karam and Jean‐Charles Mare
The purpose of this paper is to develop accurate model and simulation of mechanical power transmission within roller‐screw electromechanical actuators with special attention to…
Abstract
Purpose
The purpose of this paper is to develop accurate model and simulation of mechanical power transmission within roller‐screw electromechanical actuators with special attention to friction, compliance and inertia effects. Also, to propose non‐intrusive experiments for the identification of model parameters with an integrator or system‐oriented view.
Design/methodology/approach
At system design level, the actuation models need to reproduce with confidence the energy losses and the main dynamic effects. The adopted modelling methodology is based on non‐intrusive measurements taken on a standard actuator test‐bench. The actuator model is first structured with respect to the bond‐graph formalism that allows a clear identification of the considered effects and associated causalities for model implementation. Various approaches are then combined, mixing blocked or moving load, position or torque control and time or frequency domains analysis. The friction representation model is suggested using a step‐by‐step approach that covers a wide domain of operation. The model is validated under varying torque and speed conditions.
Findings
A structured model is introduced with support of the bond‐graph formalism. Combining blocked/moving load and time/frequency domain experiments allows the development of progressive model identification. An advanced friction representation model is proposed including the effects of speed, transmitted force, quadrant of operation and roller‐screw preload.
Originality/value
Mechanical transmission energy losses and dynamics are modelled in a system‐oriented view without massive need to confidential design parameters. Not only speed but also load and operation quadrant effects are reproduced by the proposed friction model. The non‐intrusive experimental procedure is made consistent with use of a standard actuator test‐bench.
Details
Keywords
Introduction – In today’s intense competitive environment, businesses that want to have a sustainable competitive advantage must put the customer at the centre of all their…
Abstract
Introduction – In today’s intense competitive environment, businesses that want to have a sustainable competitive advantage must put the customer at the centre of all their activities and create customer loyalty by offering products and services that will provide customer satisfaction. One of the key elements of ensuring customer satisfaction is the effective handling of customer complaints, which is defined as the customers expressing their dissatisfaction with unmet expectations and unsatisfied needs verbally or in writing. The concept of a complaint as a response of customers’ dissatisfaction with the products and services they experience is an invaluable feedback mechanism for businesses to resolve issues relating to their products and services.
Aim – The aim of this chapter is to emphasise the importance of the concept of complaint as an important part of customer relations management and an effective marketing tool for the tourism sector. As a service sub-sector, the simultaneous production and consumption of services in the tourism sector ensures customer satisfaction more than concrete products, due to their inseparable nature. For this reason, handling, evaluating and finalising customer complaints has an important function and value in providing the necessary information for tourism enterprises to become aware of their deficiencies and mistakes. Complaint management has started to play an even more critical role for the tourism industry in preventing customer losses due to dissatisfaction, especially considering the shrinkage in demand in the sector due to the COVID-19 pandemic.
Method – Firstly the concept of complaint and the importance of complaints for businesses were explained, customer complaint behaviour and the factors affecting this behaviour were examined in detail, the concept of online complaint was mentioned and the subject was evaluated in terms of tourism businesses.
Results – While the effective management and resolution of complaints should be seen as a goal by every tourism business, it is vital that they understand customer complaint behaviours, the factors affecting this behaviour and how complaints should be managed in a way that will result in favour of the business.
Conclusion – A complaint management process that enables customers to easily report their complaints to businesses and produces solutions as soon as possible will positively affect customer satisfaction. In this context, in order to reduce the negative effects on tourism enterprises, especially through the pandemic, business need to have clear and easy-to-access procedures, provide a quick response, show reliability and consistency in providing a solution, keeping the complainant informed of progress, have employees who can communicate with empathy and courtesy, have enough employees to deal with the situation, and adopt proactive approaches to prevent complaints rather than reducing the volume of complaints.
Originality/Value – This research contributes to the literature in terms of complaining behaviour, examining the factors affecting this behaviour and emphasising the importance of the concept of complaints in the tourism sector. In addition, the research is important in terms of examining the contributions of an effective complaint management system in reducing the negative effects of the COVID-19 pandemic on the tourism sector, which is one of the sectors mostly affected on a global scale.
Details
Keywords
M. Ali Ülkü, Dawne M. Skinner and Gonca Yıldırım
The earth’s carrying capacity cannot withstand the pace of consumption resulting from current economic models, mainly the linear economy (LE) built on a throwaway culture. In the…
Abstract
The earth’s carrying capacity cannot withstand the pace of consumption resulting from current economic models, mainly the linear economy (LE) built on a throwaway culture. In the last few decades, the concept of a circular economy (CE), aiming to design waste out of the economy and mimic ecosystems, emerged as a strong alternative to LE. Being at the heart of the economic landscape, supply chains (SCs) need to respond to the necessary shift to CE. In so doing, the planning and execution of circular supply chains (CSCs) require a broader comprehension of CE and more sophisticated and large-scale analytical decision models. This chapter surveys extant literature on available best practices and quantitative models for sustainable supply chains (SSCs) and offers a new definition of CSC. Mapping on the knowledge extracted from this classification, potential gaps and strengths in the literature are identified. Key research papers on the “closed-loop” and “open-loop” ends of CSCs are highlighted. Challenges in developing CSC performance indicators and prescriptive models are emphasized.