Search results

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.

The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.

Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.

The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.

Environmental impact and changes are becoming essential in textile and yarn industries, where reliable measurement of parameters related to processing harmful substances needs to be examined. Such findings can be cumulated using smart assessment like life cycle analysis. The ecological impact category, supply chain, and climate-changing factors were considered for the necessary assessment.

This paper applies the Life Cycle Assessment technique in the textile and yarn industry to estimate critical environmental potentials. The critical input for the fabric and yarn industry was put in the GaBi software model to estimate various environmental potentials.

Global warming potential, electricity, and raw cotton consumption in the fabric and yarn industry were critical concerns where attention should be focused on minimizing environmental potentials from cradle to gate assessment.

This qualitative study is made via the industry case-wise inputs and outputs, which can vary with demographic conditions. Some machine and human constraints have not been implemented in modelling life cycle model for smart simulation. Smart simulation helps in linking different parameters and simulates their combined effects on the product life cycle.

This modelling approach will help access pollution constituents in different supply chain production processes and optimize them simultaneously.

The raw data used in this analysis are collected from an Indian small scale textile industry. In the textile fabrication industry, earlier assessments were carried out in cotton generation, impact of PET, cradle to grave assessment of textile products and garment processing only. In this research the smart model is drawn to consider each input parameter of yarn and textile fabric to determine the criticality of each input in this assessment. This article mainly talks about life cycle and circular supply assessment applied to first time for both cotton to yarn processing and yarn to fabric industry for necessary estimation of environment potentials.

The rise in demand and high utilization of fuel causes severe environmental threat for the nations on the globe. Rapid burning potential of hydrogen produces enormous amount of thrust, and it is mainly owing to wide flame range and less onset of ignition.

The significant contribution of hydrogen as fuel has been explored by several researchers around the globe recently to use in aviation sector owing to its eco-friendly nature. Hydrogen is a safe and clean fuel, and it can be generated from several sources. The effects of addition on hydrogen on gas turbine on combustion characteristics and emission concentration level on atmosphere have been reviewed in this paper.

Incorporation of hydrogen is effective reducing nitrous oxide emission, high calorific value and flame less combustion. Addition of hydrogen to higher proportions enhances the combustion performance, minimizing the setbacks of conventional fuel and meets the specified standards on emission.

From the literature review, the comparative study on hydrogen with other fuel is explained. This paper concludes that addition of hydrogen in fuel enhances the performance of combustion on gas turbine engine along with significant reduction in emission levels.

This study aims to develop synthetic ester lubricating oil using renewable sinapic acid as raw material, to explore the structural design and selection of raw materials for green, high-performance synthetic ester oils.

A series of the sinapate ester oils were synthesized through esterification and alkoxylation reactions using renewable source sinapic acid as the raw material. The molecular structures of the oils were characterized by nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy spectroscopy and elemental analysis. The oils were evaluated for safety, viscosity-temperature properties, thermal and oxidative stability, as well as friction reducing and anti-wear characteristics.

Compared to commercial base oil tris (2-ethylhexyl) trimellitate (Phe-3Ci8), the bio-lubricant exhibits superior antifriction and anti-wear properties. Notably, the JCi8-C12 sample performed exceptionally well, reducing the friction coefficient by 11.42% and wear volume (WV) by 54.44% in steel/steel tribo-pairs. In steel/aluminum tribo-pairs, the friction coefficient decreased by 27.48%, while WV was reduced by 85.81%. Mechanistic studies reveal that the introduction of short-chain methoxy groups and stable conjugated systems (aromatic rings and double bonds) inhibit oxidation and decomposition at elevated temperatures. The p-p stacking effect enables lubricant molecules to arrange stably on friction surfaces, forming a durable lubricating film.

The utilization of biomass resources to develop green synthetic lubricating oil with excellent performance not only enhances the added value of waste from agricultural processing but also offers significant benefits in terms of both economic and environmental sustainability.

This paper aims to investigate the effect of additives in Jet-A fuel blends, especially on performance, combustion and emission characteristics.

Jet-A fuel was formed by using Kay’s and Gruenberg–Nissan mixing rules by adding additive glycerol with TiO₂. While measuring the combustion performance, the amount of oxygen content present in fuel and atomization are the key factors to consider. As such, the Jet-A fuel was created by adding additives at different proportion. A small gas turbine engine was used for conducting tests. All tests were carried out at different load conditions for all the fuel blends such as neat Jet-A fuel, G10T (glycerol 10% with 50 ppm TiO₂ and Jet-A 90%), G20T (glycerol 10% with 50 ppm TiO₂ and Jet-A 90%) and G30T (glycerol 10% with 50 ppm TiO₂ and Jet-A 90%).

From tests, the G20T and G10T produced better results than other blends. The thermal efficiency of the blends of G20T and G10T are 22% and 14% higher than neat Jet-A fuel. Further, the improved static thrust with less fuel consumption was noticed in G20T fuel blend.

The G20T blends showed better performance because of the increased oxygenated compounds in the fuel blends. Moreover, the emission rate of environmentally harmful gases such as NOx, CO and HC was lower than the neat Jet-A fuel. From the results, it is clear that the rate of exergy destruction is more in the combustion chamber than the other components of fuel.

Existing research on the effects of azo dyes on human health is insufficient and often contradictory. Children are more exposed to the negative effects of food dyes than adults because they consume more foods and drinks containing food dyes. The research aimed to address the potential histopathological impacts of Sunset Yellow on the lungs and hearts of developing mice.

About36 adult male Swiss albino mice were separated into six groups (n: 6). The groups were created, including three treatment groups (four, eight and 10 weeks old) and three control groups. Sunset Yellow (a dose level of 30 mg/kg/bw) per week was administered orally for 28 days to the treatment groups, while the control groups were not treated. On the final day of the research, the mice were sacrificed by cervical dislocation, and their lungs and hearts were removed. The tissues were preserved in 10% formaldehyde and processed through a series of alcohol and xylene. Then they were dyed with hematoxylin-eosin and evaluated under light and electron microscopy.

Sunset Yellow caused significant increases in mean body weight (p: 0.013), lung weight (p: 0.011) and heart weight (p: 0.049). Hemorrhage, inflammation and vacuole formation were detected in lung tissue, while severe hemorrhage, vacuoles and degenerated cells were observed in heart muscle tissue. Notably, the histopathological changes in lung and heart tissues were more pronounced during the weaning period. Sunset Yellow induced histopathological and physiological abnormalities in the lungs and hearts of mice, suggesting it may adversely affect lung and heart development during weaning and adolescence. Therefore, restricting the use of Sunset Yellow may be warranted in early life stages.

Finally, as all studies have limitations, the research has limitations. The limitation of this study is the SY dose applied. Although the selected dose was determined based on the Acceptable Daily Intake (ADI) value used as a reference, investigating the effects of SY at different doses could be beneficial. Additionally, different analytical methods could be applied, and the results could be compared. In today’s society, challenges include a lack of knowledge about the effects of daily consumption of SY on health, limited and outdated resources on the subject and scarcity of field research.

Sunset Yellow may be especially harmful during adolescence and adulthood.

• •

  Sunset Yellow (SY) affected the lungs and hearts of mice developing.

• •

  SY caused a rise in the average bodyweight and relative organ weights.

• •

  Degeneration noted in lungs and hearts of all age groups of mice.

• •

  SY may be especially harmful during childhood and youth.

Sunset Yellow (SY) affected the lungs and hearts of mice developing.

SY caused a rise in the average bodyweight and relative organ weights.

Degeneration noted in lungs and hearts of all age groups of mice.

SY may be especially harmful during childhood and youth.

The purpose of this study is to predict the performance and emission characteristics of micro gas turbine engines powered by alternate fuels. The micro gas turbine engine performance, combustion and emission characteristics are analyzed for the jet fuel with different additives.

The experimental investigation was carried out with Jet A-1 fuel on the gas turbine engines at different load conditions. The primary blends of the Jet A-1 fuels are from canola and solid waste pyrolysis oil. Then the ultrasonication of highly concentrated multiwall carbon nanotubes is carried with the primary blends of canola (Jet-A fuel 70%, canola 20% and 10% ethanol) and P20E (Jet-A 70% fuel, 20% PO and 10% ethanol).

The consumption of the fuel is appreciable with the blends at a very high static thrust. The 39% reduction in thrust specific fuel consumption associated with a 32% enhance in static thrust with P20E blend among different fuel blends. Moreover, due to the increase in ethanol concentration in the blends PO20E and C20E lead to a 22% rise in thermal efficiency and a 9% increase in higher oxygen content is observed.

The gas turbine engine emits very low emission of gases such as CO, CO₂ and NOx by using the fuel blends, which typically reduces the fossil fuel usage limits with reduced pollutants.

The emission of the gas turbine engines is further optimized with the addition of hydrogen in Jet-A fuel. That is leading to high specific fuel exergy and owing to the lower carbon content in the hydrogen fuel when compared with that of the fossil fuels used in gas turbine engines. Therefore, the usage of hydrogen with nanofluids was so promising based on the results obtained for replacing fossil fuels.

This paper aims to investigate the current state of biocomposites used in fused deposition modelling (FDM) with a focus on their mechanical characteristics.

The study presents a variety of biocomposite materials that have been used in filaments for 3D printing by different researchers. The process of making filaments is then described, followed by a discussion of the process parameters associated with the FDM.

To achieve better mechanical properties of 3D-printed parts, it is essential to optimize the process parameters of FDM while considering the characteristics of the biocomposite material. Polylactic acid is considered the most promising matrix material due to its biodegradability and lower cost. Moreover, the use of natural fibres like hemp, flax and sugarcane bagasse as reinforcement to the polymer in FDM filaments improves the mechanical performance of printed parts.

The paper discusses the influence of critical process parameters of FDM like raster angle, layer thickness, infill density, infill pattern and extruder temperature on the mechanical properties of 3D-printed biocomposite.

The purpose of this paper is to investigate the tensile strength, Young’s modulus, dimensional stability and porosity of acrylonitrile butadiene styrene (ABS)–oil palm fiber composite filament for fused deposition modeling (FDM).

A new feedstock material for FDM comprising oil palm fiber and ABS as a matrix was developed by a twin screw extruder. The composite filament contains 0, 3, 5 and 7 Wt.% of oil palm fiber in the ABS matrix. The tensile test is then performed on the fiber composite filament, and the wire diameter is measured. In this study, the Archimedes method was used to determine the density and the porosity of the filament. The outer surface of the wire composite was examined using an optical microscope, and the analysis of variance was used to assess the significance and the relative relevance of the primary factor.

The results showed that increasing the fiber loading from 0.15 to 0.4 MPa enhanced tensile strength by 60%. Then, from 16.1 to 18.3 MPa, the Young’s modulus rose by 22.8%. The density of extruded filament decreased and the percentage of porosity increased when the fiber loading was increased from 3 to 7 Wt.%. The diameter deviation of the extruded filaments varied from −0.21 to 0.04 mm.

This paper highlights a novel natural resource-based feedstock material for FDM. Its mechanical and physical properties were also discovered.

In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.

The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.

The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.

In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.

This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.