Search results

This study aims to provide an efficient nanocomposite that might be used to protect deteriorated archaeological stucco.

The current experimental study evaluates the effectiveness of the hydroxyapatite nanoparticles (HA NPs) added to graphite carbon nitride (g-C₃N₄) and mixed with Paraloid (B-72) (B-44) in acetone in consolidating samples. The physicochemical properties of the as-prepared nanopowders have been investigated using Fourier transform infrared (FT-IR). This study involves monitoring the transmission electron microscope (TEM), X-ray diffraction (XRD) and Fourier transform changes in consolidated samples after exposure to various conditions by using the digital microscope and scanning electron microscopy to identify the appearance of the consolidated stucco samples after applying the selected nanocomposites and after their artificial aging procedures. Color change is measured using a colorimeter, and comparisons are made between samples before and after aging. Physical and mechanical properties are determined, and the contact angle is measured to measure hydrophobicity rate.

The obtained results indicate that HA/g-C₃N₄ hybrid nanocomposites with a composition of HA 0.5%/g-C₃N₄ 1%/B-72 3% and HA 0.5%/g-C3N4 1%/B-44 3% achieved the best consolidating results among the proposed mixtures for stucco samples, where the percentage of weight loss was 0.77 with B-72, 0.53 with B-44. Surface identification and characterization of hydroxyapatite HA NPs/g-C₃N₄ hybrid nanocomposites embedded in B72/B44matrix were carried out using Scanning Electron Microscopy coupled with energy-dispersive x-ray spectroscopy (SEM–EDX).

This study provides important findings from the analytical procedures used to evaluate the consolidation materials used in this study. The findings are beneficial for the preservation of archaeological stucco. The investigation findings revealed that the most favorable outcomes were obtained from HA/g-C₃N₄ hybrid nanocomposites containing HA 0.5%, g-C₃N₄ 1% and B-72 3%, as well as HA 0.5%, g-C₃N₄ 1% and B-44 3%. Consequently, it is advised to use this nanocomposite to consolidate archaeological stucco, thus establishing a promising initial stride toward conserving archaeological stucco for future research endeavors. This study introduces a new nanocomposite material (HA NPs/G-C₃N₄) that can be used to protect and improve archaeological plaster. This is very important for preserving cultural heritage. The incorporation of nanotechnology improves the material’s physical and mechanical qualities. The research uses various characterization techniques (including TEM, XRD and FT-IR) to meticulously analyze the physicochemical properties of the nanocomposite material and assess its efficacy in practical applications through artificial aging experiments, offering novel insights and methodologies for future cultural relic preservation studies.

Building Information Modeling (BIM) is a revolutionary innovation in the construction industry to virtually design and mange projects throughout the building lifecycle. Although Estonia is one of the foremost countries in the Information and Communications Technology (ICT) sector, BIM adoption in the Estonian construction industry is still lagging behind other countries. This paper is part of doctoral research that aims to determine the barriers to BIM adoption and develop a framework for effective implementation of BIM in the Estonian construction industry. The purpose of this paper is to examine the status of BIM adoption, BIM benefits and common barriers to BIM adoption in the construction industry worldwide.

The methodology used in this study is a literature review of journal articles, conference proceedings and published reports from various sources.

This study showed BIM benefits through building lifecycle phases and explored the BIM adoption rate in the construction industry of various countries. Eighteen barriers to BIM adoption were also identified.

The study presented is limited to a literature review – some related literature may have been missed.

The main practical significance of this study is that the findings can be used to inform a further survey to model the barriers to BIM adoption in the Estonian construction industry.

This study offers information on BIM adoption in the construction industry and will form the basis of further research.

To stay competitive, hotels need to develop a viable customer retention strategy. Since a key to the successful development of such a strategy rests with customer relationship management, hotels should identify the most profitable ways to build and maintain a loyal customer relationship. In an effort to help hotels understand their customers’ preferences and the ways to interact with the customers, we propose data mining techniques. Based on a case study of luxury hotels in South Korea, this paper demonstrates the usefulness and practicality of the proposed data mining techniques.

Chronic driver turnover can adversely influence a trucking firm's competitiveness through disrupted delivery services, equipment down time and excessive recruiting expenses. Thus, a key to the survival of the trucking firm rests with its ability to recruit and retain qualified drivers who are less likely to cause turnover. In an effort to develop the ways to recruit and retain those drivers, we propose data mining techniques. Based on an empirical study of trucking firms in the USA, this paper not only develops a viable driver recruitment and retention strategy, but it also demonstrates the usefulness of the proposed data mining techniques.

Functionalization of organic cotton fabrics (OCFs) by in situ deposition of chitosan reduced-stabilized silver nanoparticles (AgNPs). No other toxic chemicals used to warrant an ecofriendly synthesis protocol. Human toxicity of silver systematically avoided to use as textile clothing. Primary colors (nearly-red, yellow and blue) were imparted on OCFs via localized surface plasmon resonance (LSPR) of AgNPs. Decent mechanical properties and laundering durability in terms of antibacterial/fastness test improved mechanical properties.

Silver nanoparticles can be synthesized by using silver nitrate along with commercially available chitosan. Due to the surface LSPR property of silver nanoparticles, it exhibits versatile colors depending on the synthesizing procedures. The coloration occurs due to the electrostatic interaction between the AgNPs and chitosan-treated OCF. The nanotreated fabrics provide excellent mechanical properties with improved antibacterial effects.

X-ray fluorescence (XRF) analysis quantifies the developed materials in the substrates. Scanning electron microscopy (SEM) characterization indicates the appearance and morphologies of silver nanoparticles into the fabric surface after the coloration process. It proves that the treated cotton knit fabric exhibits the LSPR optical features of AgNPs. The antibacterial and mechanical properties confirm the improved functionality of products.

Improved mechanical properties, antibacterial performances and coloration effects on organic cotton substrates in terms of chitosan-mediated nanosilver are not yet studied.

This study aims to identify the enabling factors for Building Information Modeling (BIM) adoption in Vietnamese construction enterprises and uncover their interrelationships. This will help stakeholders focus on controlling and allocating resources (time, personnel, and costs) appropriately to adopt BIM and differentiate themselves from fierce competition in the architectural, engineering, construction and operations (AECO) industry.

This study first identifies and evaluates 32 enabling factors for applying BIM in the Vietnamese construction industry according to the TOE extended framework. Afterwards, a hybrid questionnaire survey using a convenient sampling method is conducted to capture stakeholders' views. The exploratory factor analysis (EFA) and the partial least squares structural equation modelling (PLS-SEM) technique are then applied to identify the constructs of the enabling factors and their interrelationships.

The study extracts six constructs that could have a significant impact on the adoption of BIM in construction enterprises, namely: technical feasibility (TF), human resources and management (HRM), company business vision (CBV), political environment (PE), economic viability (EV), and legal aspects (LA). Based on eleven proposed hypotheses, the analysis results confirm nine hypotheses and show that the HRM, TF, and CBV have the strongest effects on managers in evaluating the factors for BIM.

The results of the study fill the gap in knowledge by discovering the interrelationships among the enabling factors for BIM adoption in construction enterprises. The results might support the construction enterprises and their stakeholders in increasing the application of BIM, and digital transformation in construction industry.

There has been growth in Islamic finance both in Muslim countries and around the world during the last two decades. This has attracted interest of those concerned with combating crime in financial institutions. This article aims to highlight the Shari'ah law's normative framework in addressing the different aspects of financial crime.

The paper is a general discussion of the substantive Islamic law (Koran, Haddiths, etc.) and begins with an introduction of the significance of property in Islam. It then focuses on the Shari'ah perspective on financial crime.

It is found that Islam has stressed and asserted the importance of honesty in business and monetary dealings. Acts negatively affecting the economy are prohibited by Shari'ah under the division of criminal law developed by Islamic jurisprudence.

The paper shows that Islamic law widens the circle of protection against financial crimes.

The adoption of building information modeling (BIM) technology in the global architecture, engineering and construction (AEC) industries is steadily increasing. However, developing countries such as Saudi Arabia are still lagging behind. The purpose of this paper is to present a framework for BIM adoption in the AEC industry in Saudi Arabia through a case study.

The study adopted a two-pronged approach. First, the various stages, benefits and challenges of BIM implementation in a local AEC firm’s pilot project were documented. Then, a BIM maturity measurement of the pilot project was conducted, and identification of the areas where improvements can be made.

BIM implementation provided several benefits and efficiency gains. These include a faster design processes, effective reuse of information and overall client satisfaction. Challenges faced include a lack of interest by clients and industry stakeholders, inadequate experience of the BIM team, and lack of mentorship from a BIM champion. The findings of the BIM maturity measurement were presented as an implementation framework in the five process areas and ten subject areas of the Project Management Institute’s (PMI) project management framework.

Though, frameworks, guidelines and protocols have been developed to facilitate the successful adoption of BIM, the issue is not a case of “one size fits all.” This study thus introduces the much needed awareness in the research and professional domain in Saudi Arabia. It also presents the proposed framework in the PMI framework, which is an incremental innovation to previous work.

Health care is a complex system, mandating adoption of unrelenting updates of guidelines and best practices. Securing a balanced system of current practice and matching documentation has always been a challenge due to impaired connection between traditional forms of documentation (e.g. policies, procedures, and guidelines) and users. Departmental manuals always find their way back to shelves away from the workplace, and continuous interaction with customers and complexity of business processes hinder timely update and consequently sustainable improvement. The paper aims to discuss this issue.

In late 2014, the corresponding author visited Japan as part of Kaizen benchmark tour that introduced the concepts and applications of “Kaizen,” the Japanese word for continuous improvement, in Toyota factory and health care institutes in Fukuoka, Nagoya, and Tokyo. Soon thereafter, the authors adopted Kaizen to be the organizational theme for improvement. QPS team launched several initiatives throughout 2015 to improve the quality of documentation. Documents submitted had one thing in common, all participants used flowcharts, diagrams, and even drawings to simplify hard-to-understand processes. This challenge highlighted the utilization of diagrams, well-organized forms, infographics, and other methods to simplify processes and to vitalize documents.

Since the hospital utilizes the paper-form prescribing system, prescription errors lead to delays in dispensing time, affecting patient satisfaction in emergency room’s pharmacy. Pharmacy team launched a project using document vitalization as an improvement strategy. Aggregate results showed 16.7 percent reduction in average time per prescription in inpatient pharmacy and 20.0 percent reduction in emergency room pharmacy. Although measurements did not continue over a longer period or were statistically analyzed, they provide a crude indication of possible improvement using document vitalization.

Lack of a sound measurement system with proper statistical analysis prevented the provision of reliable evidence of improvement. Moreover, lack of previous case studies has been an obstacle. It is the authors’ plan to provide measurable evidence of improvement for multiple projects through measurement of process time, customer and employee satisfaction, the number of process errors, etc. Nevertheless, feedback from users provides a rough indication of possible improvement using document vitalization. It is the authors’ aim to incorporate “document vitalization” into the fabric of documentation process and SFHPM culture.

Empowerment creates an energy-filled work environment where staff members feel they are the real change factors and are actively contributing to the advancement and success of their organizations (Taylor 2013). This does not mean allowing chaos and unplanned changes to disrupt process flow but rather to leave room for trial and error in a controlled environment and pilot-testing significant changes before generalization.

The term vitalization itself is a brand new one used in this field, and the authors introduce it for the first time to be a solution that comes from frontliners and can bridge the gap between document and practice. If all document vitalization successes were a tribute to one factor, it would be “empowerment.” Once leaders have the courage to listen to frontline staff voice and allow them to do things differently, the staff members will surprise their organizations with the marvels of their creations.

This paper aimed to identify critical success factors (CSFs) of building information modeling (BIM) implementation among architectural, engineering and construction (AEC) firms in Malaysia using quantitative statistical methods.

A questionnaire survey was conducted on the population of all AEC firms in Malaysia to rank the relative importance of 15 success factors (SFs) for BIM implementation in the firm on a 5-point Likert scale. The sampling frame consisted of all members registered with the Construction Industry Development Board (CIDB) from which 184 responses were received. The distinction between SFs and CSFs was achieved by a normalized mean cutoff value. Principal component analysis (PCA) was used to determine the relative groupings of the CSFs and structural equation modeling (SEM) were used to examine the underlying relationships between the CSF groupings.

Results of this study validated 11 previously identified CSFs for successful implementation of BIM among Malaysian AEC firms. Non-technical factors such as management, leadership and coordination were found to have higher relevance compared to technical factors such as software and hardware. Ranking analysis of the CSFs found internal coordination factors to have more importance compared to external coordination factors. PCA revealed 4 principal components (PCs) from the 11 CSFs. Together, these four PCs explain 74.3% of the variance in the data. Also, six hypothesized relationships between these groupings were supported using PLS-SEM.

This study found an interaction between internal and external coordination factors for the implementation of BIM. Future research could explore the dynamics of both intra- and inter-firm coordination, which may create an environment suitable for BIM implementation.

This study provides Malaysian AEC firms with a general strategy on how to approach the implementation of BIM within the firm. In addition, government initiatives should focus on increasing BIM competency of graduates entering the workforce. This can be achieved through the development of a national BIM curriculum. Apart from that, the implementation of BIM requires a radical shift in the traditional building delivery process, not just simply acquiring new software and hardware.

This study revealed that the interactions between different firms at the industry level can influence successful implementation of BIM at the firm level. CSFs for BIM implementation at the firm level have been extensively studied. However, few studies exist which explore the inter-firm collaborations at the industry level that facilitate successful BIM implementation.