Search results

The conventional strain gauge type pressure sensor suffers in static testing of engines due to the contact transduction method. This paper aims to focus on the concept of non-contact transduction-based pressure sensor using eddy current displacement sensing coil (ECDS) to overcome the temperature limitations of the strain gauge type pressure sensor. This paper includes the fabrication of prototypes of the proposed pressure sensor and its performance evaluation by static calibration. The fabricated pressure sensor is proposed to measure pressure in static test environment for a short period in the order of few seconds. The limitations of the fabricated pressure sensor related to temperature problems are highlighted and the suitable design changes are recommended to aid the future design.

The design of ECDS-based pressure sensor is aimed to provide non-contact transduction to overcome the limitations of the strain gauge type of pressure sensor. The ECDS is designed and fabricated with two configurations to measure deflection of the diaphragm corresponding to the applied pressure. The fabricated ECDS is calibrated using a standard micro meter to ensure transduction within limits. The fabricated prototypes of pressure sensors are calibrated using dead weight tester, and the calibration results are analyzed to select the best configuration. The proposed pressure sensor is tested at different temperatures, and the test results are analyzed to provide recommendations to overcome the shortcomings.

The performance of the different configurations of the pressure sensor using ECDS is evaluated using the calibration data. The analysis of the calibration results indicates that the pressure sensor using ECDS (coil-B) with the diaphragm as target is the best configuration. The accuracy of the fabricated pressure sensor with best configuration is ±2.8 per cent and the full scale (FS) output is 3.8 KHz. The designed non-contact transduction method extends the operating temperature of the pressure sensor up to 150°C with the specified accuracy for the short period.

Most studies of eddy current sensing coil focus on the displacement and position measurement but not on the pressure measurement. This paper is concerned with the design of the pressure sensor using ECDS to realize the non-contact transduction to overcome the limitations of strain gauge type pressure sensors and evaluation of the fabricated prototypes. It is shown that the accuracy of the proposed pressure sensor is not affected by the high temperature for the short period due to non-contact transduction using ECDS.

In Aerospace applications, the inlet tubes are used to mount strain gauge type pressure sensors on the engine under static test to measure engine chamber pressure. This paper aims to focus on the limitations of the inlet tube and its design aspects to serve better in the static test environment. The different sizes of the inlet tubes are designed to meet the static test and safety requirements. This paper presents the performance evaluation of the designed inlet tubes with calibration results and the selection criteria of the inlet tube to measure combustion chamber pressure with the specified accuracy during static testing of engines.

Two sensors, specifically, one cavity type pressure sensor with the inlet tube of range 0-6.89 MPa having natural frequency of the diaphragm 17 KHz and another flush diaphragm type pressure sensor of the same range having −3 dB frequency response, 5 KHz are mounted on the same pressure port of the engine under static test to study the shortcomings of the inlet tube. The limitations of the inlet tube have been analyzed to aid the tube design. The different sizes of inlet tubes are designed, fabricated and tested to study the effect of the inlet tube on the performance of the pressure sensor. The dynamic calibration is used for this purpose. The dynamic parameters of the sensor with the designed tubes are calculated and analyzed to meet the static test requirements. The diaphragm temperature test is conducted on the representative hardware of pressure sensor with and without inlet tube to analyze the effect of the inlet tube against the temperature error. The inlet tube design is validated through the static test to gain confidence on measurement.

The cavity type pressure sensor failed to capture the pressure peak, whereas the flush diaphragm type pressure sensor captured the pressure peak of the engine under a static test. From the static test data and dynamic calibration results, the bandwidth of cavity type sensor with tube is much lower than the required bandwidth (five times the bandwidth of the measurand), and hence, the cavity type sensor did not capture the pressure peak data. The dynamic calibration results of the pressure sensor with and without an inlet tube show that the reduction of the bandwidth of the pressure sensor is mainly due to the inlet tube. From the analysis of dynamic calibration results of the sensor with the designed inlet tubes of different sizes, it is shown that the bandwidth of the pressure sensor decreases as the tube length increases. The bandwidth of the pressure sensor with tube increases as the tube inner diameter increases. The tube with a larger diameter leads to a mounting problem. The inlet tube of dimensions 6 × 4 × 50 mm is selected as it helps to overcome the mounting problem with the required bandwidth. From the static test data acquired using the pressure sensor with the selected inlet tube, it is shown that the selected tube aids the sensor to measure the pressure peak accurately. The designed inlet tube limits the diaphragm temperature within the compensated temperature of the sensor for 5.2 s from the firing of the engine.

Most studies of pressure sensor focus on the design of a sensor to measure static and slow varying pressure, but not on the transient pressure measurement and the design of the inlet tube. This paper presents the limitations of the inlet tube against the bandwidth requirement and recommends dynamic calibration of the sensor to evaluate the bandwidth of the sensor with the inlet tube. In this paper, the design aspects of the inlet tube and its effect on the bandwidth of the pressure sensor and the temperature error of the measured pressure values are presented with experimental results. The calibration results of the inlet tubes with different configurations are analyzed to select the best geometry of the tube and the selected tube is validated in the static test environment.

Molecularly imprinted polymers (MIPs) have aroused focus in medicinal chemistry in recent decades, especially for biomedical applications. Considering the exceptional abilities to immobilize any guest of medical interest (antibodies, enzymes, etc.), MIPs is attractive to substantial research efforts in complementing the quest of biomimetic recognition systems. This study aims to review the key-concepts of molecular imprinting, particularly emphasizes on the conformational adaptability of MIPs beyond the usual description of molecular recognition. The optimal morphological integrity was also outlined in this review to acknowledge the successful sensing activities by MIPs.

This review highlighted the fundamental mechanisms and underlying challenges of MIPs from the preparation stage to sensor applications. The progress of electrochemical and optical sensing using molecularly imprinted assays has also been furnished, with the evolvement of molecular imprinting as a research hotspot.

The lack of standard synthesis protocol has brought about an intriguing open question in the selection of building blocks that are biocompatible to the imprint species of medical interest. Thus, in this paper, the shortcomings associated with the applications of MIPs in electrochemical and optical sensing were addressed using the existing literature besides pointing out possible solutions. Future perspectives in the vast development of MIPs also been postulated in this paper.

The present review intends to furnish the underlying mechanisms of MIPs in biomedical diagnostics, with the aim in electrochemical and optical sensing while hypothesizing on future possibilities.

Nature and occurrence of food-borne pathogens in raw and processed food products evolved greatly in the past few years due to new modes of transmission and resistance build-up against sundry micro-/macro-environmental conditions. Assurance of food health and safety thus gained immense importance, for which bio-sensing technology proved very promising in the detection and quantification of food-borne pathogens. Considering the importance, different studies have been performed, and different biosensors have been developed. This study aims to summarize the different biosensors used for the deduction of food-borne pathogens.

The present review highlights different biosensors developed apropos to food matrices, factors governing their selection, their potential and applicability. The paper discusses some related key challenges and constraints and also focuses on the needs and future research prospects in this field.

The shift in consumers’ and industries’ perceptions directed the further approach to achieve portable, user and environmental friendly biosensing techniques. Despite of these developments, it was still observed that the comparison among the different biosensors and their categories proved tedious on a single platform; since the food matrices tested, pathogen detected or diagnosed, time of detection, etc., varied greatly and very few products have been commercially launched. Conclusively, a challenge lies in front of food scientists and researchers to maintain pace and develop techniques for efficiently catering to the needs of the food industry.

Biosensors deduction limit varied with the food matrix, type of organism, material of biosensors’ surface, etc. The food matrix itself consists of complex substances, and various types of food are available in nature. Considering the diversity of food there is a need to develop a universal biosensor that can be used for all the food matrices for a pathogen. Further research is needed to develop a pathogen-specific biosensor that can be used for all the food products that may have accuracy to eliminate the traditional method of deduction.

The present paper summarized and categorized the different types of biosensors developed for food-borne pathogens.

Using the remarkable olfaction ability, insects can sense trace amounts of host plant volatiles that are notorious for causing severe damage to fruits and vegetables and in consequence the industry. The purpose of the paper is to investigate the interactions between olfactory proteins, odorant-binding proteins (OBPs) and host plant volatiles through the developed olfactory biosensors. It might be helpful to develop novel pest control strategies.

Using the successfully expressed and purified OBPs of the oriental fruit fly Bactrocera dorsalis, a biosensor was developed by immobilizing the proteins on interdigitated electrodes through nitrocellulose membrane. Based on electrochemical impedance sensing, benzaldehyde emitted by the host plants, such as Beta vulgaris, was detected, which could be used to investigate and analyze the mechanisms of pests’ sense of chemical signals. The relative decreases of charge transfer resistances of the sensor were proportional to the odorant concentrations from 10⁻⁷ M to 10⁻³ M. Meanwhile, the interactions between OBPs and benzaldehyde were studied through the process of molecular docking.

The paper provides a pest OBPs-based biosensor that could sensitively detect the host odorants benzaldehyde. Meanwhile, the most related amino acids of OBPs that bind to host plant volatiles can be distinguished with molecular docking.

An olfactory biosensor was developed to explore interactions and mechanism between the pest OBPs and benzaldehyde, which showed promising potentials for small organic molecule sensing. Simultaneously, it might be helpful for novel pest control strategies.

This study aims to report the development and experimental evaluation of three innovative corrosion-resistant modified epoxy coatings, namely, nanocomposite/toughened, self-healing and hybrid epoxy coatings, for application on steel substrates.

The corrosion resistance of these coatings was evaluated in a highly corrosive environment of salt fog spray for 2,500 h of exposure. Electrochemical impedance spectroscopy (EIS) measurements in sustained exposure to NaCl in a saturated Ca(OH)2 solution, rust creepage measurements at the location of scribe formed in the coatings and adhesion strength test were used to assess the performance of the innovative coatings. Commercially available marine-grade protective epoxy coatings were used as the reference coatings.

The test results showed that the modified epoxy coatings exhibited excellent corrosion resistance when exposed to an aggressive environment for extended periods. The EIS measurements, rust creepage measurements, pull-off strength and visual appearance of the aged modified–epoxy–coated specimens confirmed the enhanced corrosion resistance of the modified epoxy coatings.

Among the three types of modified coatings, the hybrid epoxy coating stands out to be the best performer.

The purpose of this paper is to draw on motivational and cultural theories in entrepreneurship to study the role of culture on the motivational behaviors of female entrepreneurs in Mongolia.

After several exploratory field trips to Mongolia, two women‐founded, women‐owned cases were selected and studied.

The findings of these case studies support the extant literature that the need for achievement plays a major role in motivating women to become entrepreneurs. Further, the findings suggest that the Mongolian nomadic culture of adventurism, secular culture of feminism and Asian culture of collectivism play important roles in motivating and supporting women to become successful entrepreneurs.

This study has implications for research on entrepreneurial motivations and women entrepreneurship. Entrepreneurial motivations are closely related to cultural values. Thus, culture, particularly entrepreneur's cultural orientation, cannot be discarded or treated separately from entrepreneurial motivation and other entrepreneurial behavior research and studies. For further research, building on this case study, a quantitative cross‐cultural research can be conducted (i.e. collecting data from multiple countries) to draw a wider generalization on the role of culture on entrepreneurial motivation.

The findings of this research can have implications for the development of strategies and policies for fostering women entrepreneurship as a means for creating jobs and overcoming gender inequality.

This study contributes to the knowledge and understanding on the role of culture in supporting women entrepreneurship as a means of promoting gender equality.

Development of high efficiency nanofibrous air filter membrane by electrospinning process, to address the air pollution (both the particulate matter and the gaseous components) problem, which has become a major environmental concern.

By exploiting the advantage of active sites on soy protein isolate (SPI), the very high surface area of micro-pore rich activated carbon (AC) and the biocompatibility and biodegradable nature of polyvinyl alcohol (PVA). The authors have developed a SPI/AC/PVA hybrid membrane. Spun-bond nonwoven substrate was used as the support material to enhance the mechanical properties and also the filter handling properties. The properties of nanofibrous membrane including morphology, air permeability, filtration efficiency and formaldehyde absorption test were carried out as per standard test methods.

SPI-based membrane offers a great potential in air filtration/purification applications. Its potential to capture glancing pollutants at the molecular level is because of the presence of numerous functional groups on the soy protein surface, which enhances the adsorption of particulate matter and toxic gases, even bacteria and viruses to its surface.

The results are anticipated to provide a potential method to promote the development of a nanofibrous membrane, which can act as a high performance, dual function and eco-friendly air filter/purifier.

In recent years, the updating speed of products has been significantly accelerated, which not only provides diversified styles for consumers to select from but also makes consumers face selection problems sometimes. In addition, a large number of online reviews for products emerge on many e-commerce websites and influence consumers’ purchasing decisions. The purpose of this study is to propose a method for product selection considering consumer’s expectations and online reviews to support consumers’ purchasing decisions.

The product attributes are divided into two categories, i.e. demand attributes and word-of-mouth (WOM) attributes. For the demand attributes, for which the consumers can give specific quantified expectations, the value function of prospect theory is used to determine the consumer’s perceived values to the alternative products according to consumers’ expectations for these attributes and products’ specifications. For the WOM attributes, for which the consumers cannot give specific quantified expectations, the sentiment analysis method is used to identify the sentiment strengths for these attributes in the online reviews, and then the consumer’s perceived values to the alternative products are determined. On this basis, the product selection methods for single consumers and group consumers are given respectively.

Finally, taking the data of JD.com (https://www.jd.com/) as an example, the practicability and rationality of the method proposed in this paper is validated.

First, a new product selection problem considering consumer’s expectations and online reviews is extracted. Second, the product attributes are considered more comprehensively and are classified into two main categories. Third, the bounded rationality of the consumers in the decision-making process is described more reasonably. Fourth, the sentiment dictionaries for each WOM attribute are constructed and the algorithm step of identifying the sentiment strengths is designed, which can help to identify the sentiment strengths in the online reviews more accurately. Fifth, the situation that a group plans to purchase the same products and the members have inconsistent expectations for the product attributes is considered.

This research focuses on the development and characterization of oil-wetted spun-bonded polypropylene (PP) non-woven filters for improved air intake systems in automobiles. The study aims to enhance engine performance, durability, fuel economy and emission reduction by addressing key aspects such as contaminants filtration efficiency, loading capacity, pressure drop, temperature performance and longevity.

The research methodology involves the utilization of textile fabrics, particularly oil-wetted spun-bonded PP non-woven filters, renowned for their effective particle collection capability from intake air. Experiments were conducted using a Box–Behnken design with three variables – oil concentration, areal density and dust quantity – each at three different levels to establish correlations with the filter’s dust holding capacity (DHC) and pressure drop.

The findings indicate that immersing particles in oil-coated medium significantly enhances the filter’s DHC. Notably, castor oil as a coating demonstrates remarkable results, with a 97.53% increase in DHC and a high particulate matter filtration efficiency of 94.12%.

This study contributes to the originality of research by emphasizing the importance of oil density in determining the filter’s DHC and filtration efficiency. Furthermore, it highlights the superiority of castor oil over coconut oil-coated filter media, advancing air intake and/or filter systems for automotive engines.