Search results

This paper discusses the urban management challenges in the Greater Kuala Lumpur area. Before examining Greater Kuala Lumpur's economic and social environment, we will look at the factors that make it a competitive and fiscally sound entity. When considering urban development and redevelopment, we consider how proposed and ongoing projects, as well as plans, hierarchical links, and road networks, contributed to the increase. Because there is no urban growth boundary, land use change and rural encroachment, as well as environmental degradation and the impact of national economic projects on urban expansion, are both rapid and linear in the analysis. This paper also considers how to manage linear development that results in the creation of new suburbs. Finally, we propose strategies for achieving sustainable urban expansion and management by balancing the financial and governance capacities of Greater Kuala Lumpur local governments.

The Internet of Things (IoT) is used in the fresh agricultural product (FAP) supply chain, which can be coordinated through a revenue-sharing contract. The purpose of this paper is to make the three-level supply chain coordinate in IoT by considering the influence of FAP on market demand and costs of controlling freshness on the road.

A three-level FAP supply chain that comprises a manufacturer, distributor, and retailer in IoT is regarded as the research object. This study improves the revenue-sharing contract, determines the optimal solution when the supply chain achieves maximum profit in three types of decision-making situations, and develops the profit distribution model based on the improved revenue-sharing contract to coordinate the supply chain.

The improved revenue-sharing contract can coordinate the FAP supply chain that comprises a manufacturer, distributor, and retailer in IoT, as well as benefit all enterprises in the supply chain.

Resource utilization rate can be improved after coordinating the entire supply chain. Moreover, loss in the circulation process is reduced, and the circulation efficiency of FAPs is improved because of the application of IoT. The validity of the model is verified through a case analysis.

This study is different from other research in terms of the combination of supply chain coordination, FAPs, and radio frequency identification application in IoT.

Porous implant surface is shown to facilitate bone in-growth and cell attachment, improving overall osteointegration, while providing adequate mechanical integrity. Recently, biodegradable material possessing such superior properties has been the focus with an aim of revolutionizing implant’s design, material and performance. This paper aims to present a comprehensive investigation into the design and development of low elastic modulus porous biodegradable Mg-3Si-5HA composite by mechanical alloying and spark plasma sintering (MA-SPS) technique.

This paper presents a comprehensive investigation into the design and development of low elastic modulus porous biodegradable Mg-3Si-5HA composite by MA-SPS technique. As the key alloying elements, HA powders with an appropriate proportion weight 5 and 10 are mixed with the base elemental magnesium (Mg) particles to form the composites of potentially variable porosity and mechanical property. The aim is to investigate the performance of the synthesized composites of Mg-3Si together with HA in terms of mechanical integrity hardness and Young’s moduli corrosion resistance and in-vitro bioactivity.

Mechanical and surface characterization results indicate that alloying of Si leads to the formation of fine Mg2 Si eutectic dense structure, hence increasing hardness while reducing the ductility of the composite. On the other hand, the allying of HA in Mg-3Si matrix leads to the formation of structural porosity (5-13 per cent), thus resulting in low Young’s moduli. It is hypothesized that biocompatible phases formed within the composite enhanced the corrosion performance and bio-mechanical integrity of the composite. The degradation rate of Mg-3Si composite was reduced from 2.05 mm/year to 1.19 mm/year by the alloying of HA elements. Moreover, the fabricated composites showed an excellent bioactivity and offered a channel/interface to MG-63 cells for attachment, proliferation and differentiation.

Overall, the findings suggest that the Mg-3Si-HA composite fabricated by MA and plasma sintering may be considered as a potential biodegradable material for orthopedic application.

This study aims to present the climate change effect on potential evapotranspiration (ETP) in future periods.

Daily minimum and maximum temperature, solar radiation and precipitation weather parameters have been downscaled by global circulation model (GCM) and Lars-WG outputs. Weather data have been estimated according to the Had-CM3 GCM and by A1B, A2 and B1 scenarios in three periods: 2011-2030, 2045-2046 and 2080-2099. To select the more suitable method for ETP estimation, the Hargreaves-Samani (H-S) method and the Priestly–Taylor (P-T) method have been compared with the Penman-Monteith (P-M) method. Regarding the fact that the H-S method has been in better accordance with the P-M method, ETP in future periods has been estimated by this method for different scenarios.

In all five stations, in all three scenarios and in all three periods, ETP will increase. The highest ETP increase will occur in the A1B scenario and then in the A1 scenario. The lowest increase will occur in the B1 scenario. In the 2020 decade, the highest ETP increase in three scenarios will occur in Khorramabad and then Hamedan. Kermanshah, Sanandaj and Ilam stations come at third to fifth place, respectively, with a close increase in amount. In the 2050 decade, ETP increase percentages in all scenarios are close to each other in all the five stations. In the 2080 decade, ETP increase percentages in all scenarios will be close to each other in four stations, namely, Kermanshah, Sanandaj, Khorramabad and Hamedan, and Ilam station will have a higher increase compared with the other four stations.

Meanwhile, the highest ETP increase will occur in hot months of the year, which are significant with regard to irrigation and water resources.

Artificial intelligence (AI)-based chatbots have brought unprecedented business potential. This study aims to explore consumers' trust and response to a text-based chatbot in e-commerce, involving the moderating effects of task complexity and chatbot identity disclosure.

A survey method with 299 useable responses was conducted in this research. This study adopted the ordinary least squares regression to test the hypotheses.

First, the consumers' perception of both the empathy and friendliness of the chatbot positively impacts their trust in it. Second, task complexity negatively moderates the relationship between friendliness and consumers' trust. Third, disclosure of the text-based chatbot negatively moderates the relationship between empathy and consumers' trust, while it positively moderates the relationship between friendliness and consumers' trust. Fourth, consumers' trust in the chatbot increases their reliance on the chatbot and decreases their resistance to the chatbot in future interactions.

Adopting the stimulus–organism–response (SOR) framework, this study provides important insights on consumers' perception and response to the text-based chatbot. The findings of this research also make suggestions that can increase consumers' positive responses to text-based chatbots.

Extant studies have investigated the effects of automated bots' attributes on consumers' perceptions. However, the boundary conditions of these effects are largely ignored. This research is one of the first attempts to provide a deep understanding of consumers' responses to a chatbot.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

With the Chinese marine economy developing rapidly, the environmental problem has been occurring frequently, which needs green finance that supports energy conservation, environmental protection, and sustainable development to solve.

In this paper, the entropy method is used to measure the development level of green finance, the DEA-ML index is used to measure the green total factor productivity which is used to indicate the high-quality development level of the marine economy in 11 coastal provinces (cities), then the grey correlation degree between them whose result shows that there is a certain correlation between the two variables is calculated. The fixed-effect model was used to analyze the relationship between them.

The results show that the development level of green finance can promote the high-quality development of the marine economy, but there are still some problems in the process of green finance supporting the marine economy.

This paper seeks new growth drivers, green finance, for the high-quality development of the marine economy, which few scholars have studied.

This study aims to explore customer personality traits as an antecedent of customer citizenship behaviour which positively facilitates service providers.

This study follows the positivism research paradigm. Hence, primary data were collected from 250 homestay visitors who stayed at five selected homestays located at Mirissa homestay zone, Sri Lanka.

The present study's findings reveal that “agreeableness,” “extraversion” and “conscientiousness” personality traits promote customer citizenship behaviour. Furthermore, the openness to “experience” trait identified to have a statistically insignificant relationship with CCB and neuroticism recorded a positive impact on the relationship between CCB and personality, contrary to the existing literature.

This study comprehensively explains how service providers should arrange their service facilities to increase customer willingness to perform citizenship behaviour, which helps develop their services.

Previous research has investigated that customer personality in terms of prosocial and proactive nature impacts CCBs. In contrast, the effect of Big Five personality traits on CCB is highlighted in this study.

Coordination of digital transformation within globally dispersed factories belonging to international manufacturing networks (IMNs) is essential for competitiveness. This paper explores how digital transformation necessitates changes in the coordination of IMNs.

A case study is conducted with three Swedish manufacturing companies, thus adding to the limited empirical research covering the examined research field. Data analysis uses the technology-organization-environment (TOE) framework.

The results highlight 15 digital transformation attributes linked by intermediate themes to 13 changes in the coordination of IMNs and provide concrete industry examples. Four major themes emerged as significant in the coordination of IMNs: increased speed of technology development and rollout, amplified emphasis on a global mindset, increased need to adapt the organizational structures to enable collaboration and a higher degree of uncertainty.

Although coordination of IMNs is acknowledged as directly related to competitive advantage, the ways digital transformation necessitates changes in the coordination of IMNs have been missing in contemporary research. This research decreases this omission.

This study aims to address the problem of low-temperature wave soldering in industry production with Sn-9Zn-2.5 Bi-1.5In alloys and develop qualified process parameters. Sn–Zn eutectic alloys are lead-free solders applied in consumer electronics due to their low melting point, high strength, and low cost. In the electronic assembly industry, Sn–Zn eutectic alloys have great potential for use.

This paper explored developing and implementing process parameters for low-temperature wave soldering of Sn–Zn alloys (SN-9ZN-2.5BI-1.5 In). A two-factor, three-level design of the experiments experiment was designed to simulate various conditions parameters encountered in Sn–Zn soldering, developed the nitrogen protection device of waving soldering and proposed the optimal process parameters to realize mass production of low-temperature wave soldering on Sn–Zn alloys.

The Sn-9Zn-2.5 Bi-1.5In alloy can overcome the Zn oxidation problem, achieve low-temperature wave soldering and meet IPC standards, but requires the development of nitrogen protection devices and the optimization of a series of process parameters. The design experiment reveals that preheating temperature, soldering temperature and flux affect failure phenomena. Finally, combined with the process test results, an effective method to support mass production.

In term of overcome Zn’s oxidation characteristics, anti-oxidation wave welding device needs to be studied. Various process parameters need to be developed to achieve a welding process with lower temperature than that of lead solder(Sn–Pb) and lead-free SAC(Sn-0.3Ag-0.7Cu). The process window of Sn–Zn series alloy (Sn-9Zn-2.5 Bi-1.5In alloy) is narrow. A more stringent quality control chart is required to make mass production.

In this research, the soldering temperature of Sn-9Zn-2.5 Bi-1.5In is 5 °C and 25 °C lower than Sn–Pb and Sn-0.3Ag-0.7Cu(SAC0307). To the best of the authors’ knowledge, this work was the first time to apply Sn–Zn solder alloy under actual production conditions on wave soldering, which was of great significance for the study of wave soldering of the same kind of solder alloy.

Low-temperature wave soldering can supported green manufacturing widely, offering a new path to achieve carbon emissions for many factories and also combat to international climate change.

There are many research papers on Sn–Zn alloys, but methods of achieving low-temperature wave soldering to meet IPC standards are infrequent. Especially the process control method that can be mass-produced is more challenging. In addition, the metal storage is very high and the cost is relatively low, which is of great help to provide enterprise competitiveness and can also support the development of green manufacturing, which has a good role in promoting the broader development of the Sn–Zn series.