Search results

This paper aims to design a novel test device and study the wear properties and the thermal mechanisms of roller pairs in dual-freedom sliding contacts.

On the transition process of lubrication regimes, experiments were conducted with various values of running speed and slip ratio obtained by two motorized spindles. Temperature and surviving time would be obtained of GCr15/GCr15 and DLC/GCr15 friction pairs. Micro photography was obtained with a PGI 3D stylus profiler and a confocal microscopy OLS4000-3D. An empirical mode decomposition method was used to eliminate measure errors.

Results showed that, even with little initial lubricant, rolling/sliding pairs still rotated for a certain time. With the synthetic actions of the dual-freedom sliding, the loss of lubrication and the tilt, interesting helical grooves appeared. Sliding speeds had remarkable effects on survive time, temperatures and surface topographies. In addition, the equilibrium values of the temperature and the surface roughness were obtained in sufficient oil supply. Extreme wear-out conditions were obtained with starved lubrication. Diamond-like carbon coatings showed better heat resistance and better wear resistance.

This work would be critical for the life design and the heat treatment of rolling bearings in the full flood lubrication and the starved lubrication.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0164/

The ancient town of Lijiang is a representative place of ethnic minorities in China’s southwest border area jointly built by many ethnic groups. Its rich and diversified history, culture and architecture as well as its artistic and spiritual values need to be better retained and explored.

The protection and inheritance of Lijiang’s cultural heritage will be improved through the construction of digital memory resources. To guide Lijiang’s digital memory construction, this study explores strategies of digital memory construction by analyzing four case studies of well-known memory projects from China and America.

From the case studies analysis, factors of digital memory construction were identified and compared. Factors led to the discussion of strategies for constructing the digital memory of Lijiang within its design, construction and service phases.

The ancient town of Lijiang is a famous historical and cultural city in China, and it is also a representative place of ethnic minorities in the border area jointly built by many ethnic groups. The rich culture should be preserved and digitalized to offer better use for the whole nation.

This paper aims to provide a full introduction, new classification, comparison and investigation of the challenges as well as applications of layerless 3D printing, which is one of the industry 4.0 pioneers.

Given the significance and novelty of uniform 3D printing, more than 250 publications were collected and reviewed in an unbiased and clear manner.

As a result, the majority of uniform parts printed in polymer form are known up to this point. In a novel division for better researchers’ comprehension, uniform printing systems were classified into three categories: oxygen inhibition (OI), liquid lubrication (LL) and photon penetration (PP), and each was thoroughly investigated. Furthermore, these three approaches were evaluated in terms of printing speed, precision and accuracy, manufacturing scale and cost.

The parameters of each approach were compared independently, and then a practical comparison was conducted among these three approaches. Finally, a variety of technologies, opportunities, challenges and advantages of each significant method, as well as a future outlook for layerless rapid prototyping, are presented.

I am concerned with insights heterodox economics, and particularly the new institution economics, can offer regarding interactions between health emergencies and the airline industry. Air services not only facilitates the transmissions of diseases among humans, and between animals, but on the positive side, can expedite the movement of medicines and the transfer of those afflicted during pandemics and epidemics. They can serve to limit the outbreak of disease by providing “mercy flights” to regions poorly served by other modes. Significant challenge confronting carriers during a major event, however, often included immediate financial shocks as well as ensuring their operations do not contribute to the spread of disease. These economic challenges for both commercial carriers and public policymakers involve sources of finance for what is, in this context, a semi-public service as well as the extent to which airlines should retain standby capacity extending resilience to the air-service supply chain. Conventional neoclassical economics, while still at the center of analyzing many of these sorts of issues, has increasingly, because of its rigid assumption and poor forecasting record, been supplemented by heterodox economic thinking. This trend has been reinforced by progress in fields such as psychology. What I demonstrate is that heterodox economics, and especially the role of institutions, offers a more complete picture of the interactions between air transportation and the spread of disease.

The main objective of this article is to visualize the structure and trends of pro-environmental behavior (PEB) between 1999 and 2023 through mapping and in-depth analysis. The aim is to analyze PEB, which has received considerable academic attention in recent years due to its key role in the conservation of the environment and the protection of local communities in tourist destinations. This paper provides an important summary of the recent research that has explored the role that tourists have in protecting the environment through PEB.

This study presents a visual analysis of 2005 scholarly articles between the years 1999 and 2023 related to PEB. Using the knowledge mapping based on VOSviewer it presents the current status of research, which includes the analysis of citation analysis, co-citation analysis, co-citation network and longitudinal analysis.

PEB is an emerging topic due to its relevance to protecting the environment in the context of travel. The citation and co-citation analysis show the relevance of the behavior of tourists with regard to protecting the environment. The co-word analysis highlights the current significance of research concerning green hotels and the destination image of environmentally responsible destinations.

This study sheds light on the current research progress of PEB in the context of tourism through a comprehensive analysis (citation, co-citation and co-word). In addition, we provide theories and factors that have been previously used to study PEB in the context of tourism. The findings contribute to a broad and diverse understanding of the concept of PEB, which can provide important insights for policymakers in formulating management strategies and policies aimed at reducing environmental impacts in destinations.

The construction industry has experienced an irreversible digital transformation to smart construction. Many countries have published supporting policies to encourage the development of smart construction. However, there is no universally valid approach. This paper thus aims to evaluate smart construction policies issued by 24 pilot cities in China and identify applicable policy tools and their impact.

This paper collected 33 governmental documents on smart construction through the official websites in China. Different policy tools were classified into supply-side, demand-side and environment-side categories. The supporting policies of smart construction development in pilot cities were quantitatively evaluated by using a policy modeling consistency index (PMC-index) model.

Supply-type and environment-type policy instruments were used more frequently than demand-type policies in 24 pilot cities. Most of the 24 pilot cities had an evaluation of PMC-index over 8, realizing the consistency of smart construction policies. Eight pilot cities had an evaluation of PMC-index of 6–7.99, realizing acceptable consistency. Only Foshan City has an evaluation of PMC-index below 4, which may reflect a poor consistency of policy implementation. The paper proposes consistencies of smart construction policies of 24 pilot cities and valid policy instruments, including the presale of commercial residential buildings, additional bonus points in the tendering process and cooperating with multiple departments when promoting smart construction.

This paper contributes to expanding policy evaluation studies in the smart construction field and provides concrete suggestions for policymakers to formulate more effective and specific policies and strategies for the development of smart construction.

The impact on both the environment and operator health is significant. As high-alumina silica glass finds applications in smart devices such as curved mobile phone screens, the grinding of complex curved surfaces necessitates cleaner and more efficient cooling and lubrication methods to enhance processing quality and improve grinding yield rates. This study aims to focus on grinding high-alumina silica glass using micro-lubrication technology and compares its performance with traditional cutting fluid cooling methods.

In the fabrication of mobile phone cover plates composed of high-alumina silicon glass, the incorporation of micro-lubrication grinding technology was undertaken, with the conventional cutting fluid cooling approach serving as the benchmark control group for comparative analysis.

The results indicate that increasing the spray pressure of micro-lubrication within a specific range contributes to reducing grinding surface roughness. At a grinding speed ranging from 25 to 35 m/s, using micro-lubrication can effectively replace the traditional cutting fluid cooling method, resulting in glass surfaces with roughness levels between 0.22 and 0.26. However, at grinding speeds exceeding 35 m/s, the insufficient pressure of the micro-lubricant mist hinders most of the oil mist from entering the grinding zone, leading to inferior cooling performance compared to cutting fluid cooling. Notably, at a grinding speed of 35 m/s, micro-lubrication demonstrates better effectiveness in suppressing chipping during glass grinding compared to traditional cutting fluid cooling methods.

Through the application of micro-lubrication grinding technology, a marked improvement in the grinding quality of high-alumina silicon mobile phone cover plate glass can be achieved, leading to a reduction in surface roughness, a decrease in processing defects and ultimately satisfying the demands for high-precision and high-quality fabrication of such cover plates.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2024-0297

This paper has a dual purpose. The first is to provide a thorough analysis of developments in international marketing in relation to the coronavirus disease 2019 (COVID-19) pandemic; the second is to capitalize on these developments to set an agenda for future research in the field of international marketing.

This paper zooms in on and reviews the 18 papers published in International Marketing Review’s (IMR) Special Issue on “Covid 19: advancing international marketing theory and guiding practice” (2023, volume 40, issue 5). It also integrates recent research at the intersection of international marketing and the COVID-19 pandemic.

The paper highlights five areas that embody significant contemporaneous changes brought about by the COVID-19 pandemic and affect international marketing practice. These include (1) shifts in consumer behavior, (2) digitalization and artificial intelligence, (3) disruptions in supply chains, (4) communication and corporate social responsibility (CSR), and (5) international dynamic marketing capabilities. In order to advance international marketing theory in relation to pandemics and other external crises, the paper establishes research directions for each of these areas.

The paper provides a novel and comprehensive categorization of fundamental shifts caused by the COVID-19 pandemic and lays out a research roadmap to advance research in the field of International Marketing (IM). Important implications for practice are also discussed.

In this study, suggestions on the protection and development of marine resources, sea area use and management, improvement of laws and regulations, monitoring of marine resources and impact assessment of marine environment are put forward.

Literature research method.

A major factor contributing to the decline in fishery resources is excessive fishing. At present, there are many problems to be solved in the exploitation and utilization of marine mineral resources in China. The pollution problem of marine tourism resources is becoming increasingly serious. Overmining of coastal sea resources has led to planning and management failures.

This paper discusses the current situation of marine resource exploitation and protection in China and analyzes the reasons for excessive resource exploitation from three aspects of marine concept, laws and regulations and marine management.

To ensure the stable operation of ironmaking process and the quality and output of sinter, the multi-objective optimization of sintering machine batching process was carried out.

The purpose of this study is to establish a multi-objective optimization model with iron taste content and batch cost as targets, constrained by field process requirements and sinter quality standards, and to propose an improved balance optimizer algorithm (LILCEO) based on a lens imaging anti-learning mechanism and a population redundancy error correction mechanism. In this method, the lens imaging inverse learning strategy is introduced to initialize the population, improve the population diversity in the early iteration period, avoid falling into local optimal in the late iteration period and improve the population redundancy error correction mechanism to accelerate the convergence rate in the early iteration period.

By selecting nine standard test functions of BT series for simulation experiments, and comparing with NSGA-?, MOEAD, EO, LMOCSO, NMPSO and other mainstream optimization algorithms, the experimental results verify the superior performance of the improved algorithm. The results show that the algorithm can effectively reduce the cost of sintering ingredients while ensuring the iron taste of sinter, which is of great significance for the comprehensive utilization and quality assurance of sinter iron ore resources.

An optimization model with dual objectives of TFe content and raw material cost was developed taking into account the chemical composition and quality indicators required by the blast furnace as well as factors such as raw material inventory and cost constraints. This model was used to adjust and optimize the sintering raw material ratio. Addressing the limitations of existing optimization algorithms for sintering raw materials including low convergence accuracy slow speed limited initial solution production and difficulty in practical application we proposed the LILCEO algorithm. Comparative tests with NSGA-III MOEAD EO LMOCSO and NMPSO algorithms demonstrated the superiority of the proposed algorithm. Practical applications showed that the proposed method effectively overcomes many limitations of the current manual raw material ratio model providing scientific and stable decision-making guidance for sintering production operations.