Search results

This paper aims to examine the dynamics between Hong Kong’s domestic sporting needs and its regional aspirations as a “hub” for sport and culture, which have created challenges and contradictions for the optimal provision of relevant infrastructure. These have become particularly evident during the COVID-19 pandemic, when local restrictions have undermined Hong Kong’s appeal as an event destination and hindered access and utilization of venues. In recent years, policies in this area have mainly focused on the development of a new sports park on the former airport runway in Kai Tak, which has acquired additional significance in the city’s quest for post-pandemic economic recovery. Simultaneously, any noncommercial land use in Hong Kong, one of the most densely populated cities in the world, faces intense scrutiny over a perceived scarcity of space.

By drawing upon concepts from urban studies and policy studies, the paper explores a presumed preference for commodified sporting landscapes and provides an interdisciplinary approach to enhance the author’s understanding of sport policy and infrastructure. This is achieved through direct comparisons of two case studies, and by building on and expanding a multidimensional evaluative framework of sustainability that can avoid economic reductionism.

This paper finds that Hong Kong’s sport policy framework exhibits unbalanced consideration when it comes to the planning and development of relevant infrastructure.

By acknowledging the interrelatedness and similarity between sports and culture, the paper may further test the adaptability of cultural policy concepts for the analysis of Hong Kong’s sports policy. As such, it aims to bring the usually separated study of cultural and sport policy within a comparable framework.

Mechanoreception is crucial for robotic planning and control applications, and for robotic fingers, mechanoreception is generally obtained through tactile sensors. As a new type of robotic finger, the soft finger also requires mechanoreception, like contact force and object stiffness. Unlike rigid fingers, soft fingers have elastic structures, meaning there is a connection between force and deformation of the soft fingers. It allows soft fingers to achieve mechanoreception without using tactile sensors. This study aims to provide a mechanoreception sensing scheme of the soft finger without any tactile sensors.

This research uses bending sensors to measure the actual bending state under force and calculates the virtual bending state under assumed no-load conditions using pressure sensors and statics model. The difference between the virtual and actual finger states is the finger deformation under load, and its product with the finger stiffness can be used to calculate the contact force. There are distinctions between the virtual and actual finger state change rates in the pressing process. The difference caused by the stiffness of different objects is different, which can be used to identify the object stiffness.

Contact force perception can achieve a detection accuracy of 0.117 N root mean square error within the range of 0–6 N contact force. The contact object stiffness perception has a detection average deviation of about 15%, and the detection standard deviation is 10% for low-stiffness objects and 20% for high-stiffness objects. It performs better at detecting the stiffness of low-stiffness objects, which is consistent with the sensory ability of human fingers.

This paper proposes a universal mechanoreception method for soft fingers that only uses indispensable bending and pressure sensors without tactile sensors. It helps to reduce the hardware complexity of soft robots. Meanwhile, the soft finger no longer needs to deploy the tactile sensor at the fingertip, which can benefit the optimization design of the fingertip structure without considering the complex sensor installation. On the other hand, this approach is no longer confined to adding components needed. It can fully use the soft robot body’s physical elasticity to convert sensor signals. Essentially, It treats the soft actuators as soft sensors.

With burgeoning interest in the low-altitude economy, applications of long-endurance unmanned aerial vehicles (LE-UAVs) have increased in remote logistics distribution. Given LE-UAVs’ advantages of wide coverage, strong versatility and low cost, in addition to logistics distribution, they are widely used in military reconnaissance, communication relay, disaster monitoring and other activities. With limited autonomous intelligence, LE-UAVs require regular periodic and non-periodic control from ground control resources (GCRs) during flights and mission execution. However, the lack of GCRs significantly restricts the applications of LE-UAVs in parallel.

We consider the constraints of GCRs, investigating an integrated optimization problem of multi-LE-UAV mission planning and GCR allocation (Multi-U&G IOP). The problem integrates GCR allocation into traditional multi-UAV cooperative mission planning. The coupling decision of mission planning and GCR allocation enlarges the decision space and adds complexities to the problem’s structure. Through characterizing the problem, this study establishes a mixed integer linear programming (MILP) model for the integrated optimization problem. To solve the problem, we develop a three-stage iterative optimization algorithm combining a hybrid genetic algorithm with local search-variable neighborhood decent, heuristic conflict elimination and post-optimization of GCR allocation.

Numerical experimental results show that our developed algorithm can solve the problem efficiently and exceeds the solution performance of the solver CPLEX. For small-scale instances, our algorithm can obtain optimal solutions in less time than CPLEX. For large-scale instances, our algorithm produces better results in one hour than CPLEX does. Implementing our approach allows efficient coordination of multiple UAVs, enabling faster mission completion with a minimal number of GCRs.

Drawing on the interplay between LE-UAVs and GCRs and considering the practical applications of LE-UAVs, we propose the Multi-U&G IOP problem. We formulate this problem as a MILP model aiming to minimize the maximum task completion time (makespan). Furthermore, we present a relaxation model for this problem. To efficiently address the MILP model, we develop a three-stage iterative optimization algorithm. Subsequently, we verify the efficacy of our algorithm through extensive experimentation across various scenarios.

A popular production model for high-tech manufacturers is that they move most production lines abroad to produce formal products for sale and just keep a few production lines in headquarters to manufacture sample products for new product development. Under such a production model, the paper aims to develop a selection model of International Air Express (IAE) for high-tech manufacturers in airfreight of sample products using the fuzzy best-worst method (BWM).

In this paper, an assessment model based on the fuzzy BWM approach is proposed for high-tech manufacturers in selecting airfreight carriers for the shipping of sample products. Further, one high-tech electronic manufacturer in Taiwan was empirically investigated to validate the assessment model.

The result indicates that electronics manufacturer pays more attention to Promptness, Mutual trust, Freight rate and Financial status of fixed assets when selecting IAEs. Besides, FedEx is argued to be the most preferred IAE for the transportation of sample products. Based on the findings, some practical management implications were discussed.

Some literature limitations should be addressed. Initially, the adoption of the fuzzy BWM assumes independence among criteria. Nonetheless, this assumption is not yet to confirm in this study. Accordingly, this limitation leaves room for improvement in future studies. Further, in this paper, five experienced experts from the Radiant Opto-Electronics Corporation (ROEC) case were empirically surveyed. To ensure the validity of the surveying, this paper adopted an interviewing survey instead of a traditional mailed survey. However, more representative samples are still necessary to confirm the empirical results in future research.

Firstly, the proposed research model provides a systematic framework to the decision-making process, which assists high-tech manufacturers in identifying the most suitable IAEs based on multiple criteria. It has been illustrated that high-tech companies deliver their sample products requiring timely and secure means of transport. In practice, manufacturers can assess various IAEs considering some main factors, such as Operational Flexibility (OF), Partner Relationship (PR), Transportation Capability (TC) and Management, using fuzzy BWM. This process ensures the selection of IAEs aligning with their logistical needs and business priorities, ultimately enhancing operational efficiency and customer satisfaction. Secondly, empirical results from the ROEC case indicate that electronics manufacturer pays more attention to Promptness, Mutual trust, Freight rate and Financial status of fixed assets when selecting IAEs. Besides, FedEx is argued to be the most preferred IAE for transportation of sample products. In other words, ROEC should consider establishing long-term contracts with preferred IAEs (i.e. FedEx) to secure favorable rates and service commitments. On top of that, results not only provide practical information for manufacturers in selecting IAEs but also for IAE partners to improve their service policies.

The results not only provide practical information for high-tech manufacturers in selecting airfreight carriers but also for the airfreight carriers to improve their service quality.

To ensure the stable operation of ironmaking process and the quality and output of sinter, the multi-objective optimization of sintering machine batching process was carried out.

The purpose of this study is to establish a multi-objective optimization model with iron taste content and batch cost as targets, constrained by field process requirements and sinter quality standards, and to propose an improved balance optimizer algorithm (LILCEO) based on a lens imaging anti-learning mechanism and a population redundancy error correction mechanism. In this method, the lens imaging inverse learning strategy is introduced to initialize the population, improve the population diversity in the early iteration period, avoid falling into local optimal in the late iteration period and improve the population redundancy error correction mechanism to accelerate the convergence rate in the early iteration period.

By selecting nine standard test functions of BT series for simulation experiments, and comparing with NSGA-?, MOEAD, EO, LMOCSO, NMPSO and other mainstream optimization algorithms, the experimental results verify the superior performance of the improved algorithm. The results show that the algorithm can effectively reduce the cost of sintering ingredients while ensuring the iron taste of sinter, which is of great significance for the comprehensive utilization and quality assurance of sinter iron ore resources.

An optimization model with dual objectives of TFe content and raw material cost was developed taking into account the chemical composition and quality indicators required by the blast furnace as well as factors such as raw material inventory and cost constraints. This model was used to adjust and optimize the sintering raw material ratio. Addressing the limitations of existing optimization algorithms for sintering raw materials including low convergence accuracy slow speed limited initial solution production and difficulty in practical application we proposed the LILCEO algorithm. Comparative tests with NSGA-III MOEAD EO LMOCSO and NMPSO algorithms demonstrated the superiority of the proposed algorithm. Practical applications showed that the proposed method effectively overcomes many limitations of the current manual raw material ratio model providing scientific and stable decision-making guidance for sintering production operations.

This paper aims to identify a suitable convolutional neural network (CNN) model to analyse where void(s) are formed in asymmetrical flip-chips with large amounts of the ball-grid array (BGA) during underfilling.

A set of void(s)-filled through-scan acoustic microscope (TSAM) images of BGA underfill is collected, labelled and used to train two CNN models (You Look Only Once version 5 (YOLOv5) and Mask RCNN). Otsu's thresholding method is used to calculate the void percentage, and the model's performance in generating the results with its accuracy relative to real-scale images is evaluated.

All discoveries were authenticated concerning previous studies on CNN model development to encapsulate the shape of the void detected combined with calculating the percentage. The Mask RCNN is the most suitable model to perform the image segmentation analysis, and it closely matches the void presence in the TSAM image samples up to an accuracy of 94.25% of the entire void region. The model's overall accuracy of RCNN is 96.40%, and it can display the void percentage by 2.65 s on average, faster than the manual checking process by 96.50%.

The study enabled manufacturers to produce a feasible, automated means to improve their flip-chip underfilling production quality control. Leveraging an optimised CNN model enables an expedited manufacturing process that will reduce lead costs.

BGA void formation in a flip-chip underfilling process can be captured quantitatively with advanced image segmentation.

Financing the capital-constrained farmers to facilitate the production of agri-products is one of the greatest challenges facing the farming supply chain in the developing countries. In this study, we investigate the optimal financing scheme for the farming supply chain under random yield and investment information asymmetry environment to support rural economic development.

We analyze a stylized model of farming supply chain where the capital-constrained farmer produces and sells agri-products through the agribusiness firm, and investigate the optimal financing scheme incorporating the investment information asymmetry and the challenge of yield uncertainty.

The results show that there is no one financing scheme equilibrium dominates for all situations, the financing scheme equilibrium is affected by the bank’s supervision cost to monitor the farmer’s moral hazard behavior, the variance of random yield and the farmer’s initial capital. The preference of the financing scheme for the agribusiness firm may be different from that for the farmer. The agribusiness firm might suffer from overfinancing problem under trade credit financing when the bank’s supervision cost is larger and the farmer’s own initial capital is lower; the higher variance of random yield will flare up the effect.

This study sheds light on the choice of financing scheme under random yield and investment information asymmetry environment. This problem is particularly important for developing economies. Financing the capital-constrained farmers not only increases supplies of food and industrial raw materials, but also reduces poverty. The findings provide managerial implications for practitioners for how to leverage different financing scheme to support rural economic development.

This study develops new theoretical model for farming supply chain financing incorporating the challenge of yield uncertainty and investment information asymmetry, the two prominent factors that would impact the financial risk significantly. We analyze the equilibrium under both bank financing and trade credit financing schemes, and the results suggest that the financing scheme equilibrium is affected by the bank’s supervision cost to monitor the farmer’s moral hazard behavior, the variance of random yield and the farmer’s initial capital. The agribusiness firm might suffer from overfinancing problem under trade credit financing.

This paper aims to explore the effect of different government subsidy decisions and the differences between the consequences of these decisions when supply chain members engage in cooperative green innovation through cost-sharing arrangements.

This paper investigates the optimal decisions for green supply chains under two types of subsidies, including subsidies for green innovation research and development (R&D) costs and subsidies for consumers, by integrating game theory with numerical simulation.

The optimal R&D cost-sharing ratio is found to be 2/3 for manufacturers and 1/3 for retailers. Under any subsidy policy, the supply chain can achieve maximum total profit. When the supply chain adopts the optimal R&D cost-sharing ratio, subsidies for green innovation R&D costs prove to be the most effective in increasing the supply chain’s profit. However, from the perspective of total social welfare, the analysis reveals that government subsidies to consumers are more beneficial for promoting overall social welfare.

Previous studies on green supply chain decisions have primarily focused on either government subsidies or corporate cost sharing in isolation. In contrast, this study combines both government subsidies and cost sharing within a unified framework for a more comprehensive analysis. Additionally, this paper examines the impact of government subsidies on supply chain cost-sharing decisions and their effect on overall social welfare while considering the presence of cost sharing and using the combination of theoretical modeling and simulation analysis.

User engagement is critical for online health Q&A communities. Financial incentives, which vary across different communities and reward schemes, are expected to motivate such contribution behaviors. Even though financial incentives have been extensively examined in prior studies, the impact of newly designed contingent financial incentives of a new pay-for-answer reward scheme has not been empirically examined in any online health Q&A community. Given this research gap, our study aims to perform an exploratory investigation of the effects of contingent financial incentives on user engagement in terms of knowledge contribution and social interactions.

Based on expectancy-value theory and equity theory, a research model was developed to reflect the influences of contingent financial incentives on user engagement. A unique dataset was gathered from a large online health Q&A community utilizing this contingent financial incentive reward structure, and the Heckman selection model was applied using a two-step procedure to test these hypotheses. Possible endogeneity issues were also addressed in the robustness check.

Our results demonstrate that the effect of contingent financial incentives on answer quantity and quality is quadratic. Additionally, our study reveals that this contingent financial incentive enhances both comment and emotional interactions among users.

Our study enriches the literature on financial incentives, knowledge contribution and user engagement by revealing the nuanced effects of financial incentives within a novel pay-for-answer scheme. This study also offers significant implications for practitioners involved in online community incentive design.

This study examines the effects of financial literacy and financial risk tolerance on investor behavior by introducing social stigma as a mediator and emotional intelligence as a moderating factor.

Data is collected from 761 financially independent individual investors, with a minimum age of 25 years, a minimum of five years of stock market experience and residing in five selected major Indian cities. The collected data is subsequently analyzed using SmartPLS. Homogeneous purposive sampling followed by snowball sampling was employed.

The findings of the study demonstrate a strong and noteworthy impact of financial literacy on investor behavior. The research reveals that social stigma acts as a partial mediator and emotional intelligence plays a significant moderator with direct effects and indirect effects between financial literacy, financial risk tolerance, social stigma and investor behavior.

Exploring emotional intelligence in financial decisions enriches academic programs by integrating it into financial education. Collaboration between academia and financial institutions yields practical tools, infusing emotional intelligence into services. This prompts systemic shifts, reshaping education and societal discourse, fostering inclusive, emotionally intelligent financial landscapes, aiming to redefine both academic teachings and real-world financial practices.

Integrating emotional intelligence into government-led financial literacy programs can transform societal perspectives on financial decision-making. Customized services, destigmatizing workshops and collaborative efforts with academia foster an emotionally intelligent financial landscape, reshaping traditional paradigms.

Promoting open societal discussions about finances combats stigma, fostering a supportive space for risk-taking. Emphasizing emotional intelligence in awareness campaigns cultivates inclusivity and confidence. Normalizing financial talks empowers individuals, enhancing their well-being. Elevating both financial literacy and emotional intelligence enhances overall financial health, nurturing a community adept at navigating financial journeys.

This study marks a notable contribution to behavioral finance and social stigma theory by examining their intersection with emotional intelligence. It uniquely introduces social stigma as a mediator and emotional intelligence as a moderator, unexplored in this context. This novelty underscores the research’s significance, offering practical insights into financial well-being.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-08-2023-0626