Search results

This study aims to investigate the relevance of knowledge-oriented leadership (KOL) to technology standard innovation (TSI) from a temporary-team perspective. The mediating and moderating effect on knowledge integration (KI) and leader–member exchange (LMX) is emphasized.

The conceptual model is built based on an exhaustive literature review and is empirically tested in terms of a sample of 341 Chinese individuals with TSI experience. Quantitative analysis was performed using a questionnaire with the bootstrapping method used to demonstrate the mediating effect of KI.

The empirical results of this study prove that KI mediates the relationship between KOL and TSI. The authors deduce that LMX moderates the positive relation between KOL and KI.

Few studies have investigated the innovation activities of technology standards from a temporary-team perspective. To the best of the authors’ knowledge, this is the first study to look into the underlying mechanism of KOL in TSI. This research deepens the analysis by introducing LMX’s moderating role in the innovation process of technology standards, thereby providing valuable insights for leaders of innovation activities of technology standards and illuminating new aspects of knowledge-intensive temporary-team management.

With the development and innovation of IoT technologies, both domestic and international people in the industry believe the development of IoT are the new points of technological innovation and economic growth. But it is becoming more and more prominent that the industries are difficult to connect and the IoT technologies are not standardized. The purpose of this paper is to promote the further development of IoT technology and industry, technology standardization of IoT has become the focus of all concerned parties. Technology standardization, as a technological innovation and development process of the “pruning shears,” has been embedded into the various aspects of innovation activities.

Based on many previous theories, the authors establish a matrix of the patterns of technology standardization. The authors use the relative state of the highest level of technology of the enterprise and The degree of independent technological innovation as the two dimensions of the model. At the same time, the authors divide the competitive behaviors into two categories and match them with the technology standardization model.

The authors explain the short-term competitive behaviors in the same enterprise and among different enterprises by using the theories of mutualism and competition among species in biology, and make an analogy between the phenomenon of base pairing in DNA double helix structure and the corresponding relationship of two kinds of innovation abilities and two kinds of competitive behaviors in the process of technology standardization.

Combined with previous theories, explain that innovation capability plays a mediating role in the process in which the combinations of the patterns of technology standardization and competitive behaviors are transformed into the enterprise innovation performance, and the uncertainty of external environment play a regulatory role in the process. Finally, the authors established the final conceptual model for providing theoretical basis for the later research, and put forward the conclusions and prospect at the end of the paper.

The purpose of this paper is to improve the bioactivity of variable gradient TC4 porous scaffolds prepared by selective laser melting (SLM) through the micro-arc oxidation (MAO) technique.

Variable gradient TC4 porous scaffolds were prepared by SLM, then treated with MAO at different oxidation voltages. The microstructure, thickness and composition of MAO coatings were characterized by scanning electron microscope (SEM), energy-dispersive spectroscopy (EDS) and X-ray diffraction. The bioactivity of the MAO coatings was tested by simulated body fluid (SBF) immersion test.

SEM and EDS results show that with the increase of oxidation voltage, the content of Ca and P elements and the thickness of the MAO coatings increases. The thickness of the coating inside the scaffold is smaller than that of the outside regions. SBF immersion experiments showed that MAO-treated TC4 porous scaffolds had highest bioactivity at 440 V.

The variable gradient porous scaffolds were treated with MAO in the electrolyte containing Ca and P elements for the first time. The effect of oxidation voltages on the different region of porous scaffolds was studied in detail.

This study aims to explore the effect of innovation ecosystem stability (IES) on innovation performance of enterprises through the mediating role of knowledge acquisition (KA), and to study how these effects are moderated by unabsorbed slack.

This study draws on data from 327 Chinese enterprises and adopts the multiple linear regression method and bootstrapping method to explore the mediating effect of KA and its moderated mediating effect.

The results demonstrate that IES is positively associated with innovation performance of enterprises, and KA plays a partially mediating role. Moreover, unabsorbed slack negatively moderates the relationship between IES and KA as well as the mediating effect of KA.

This study investigates the relationship between IES and innovation performance, and the mechanism of influence, which has not been previously studied in the field of innovation ecosystem. This study also examines the interaction between unabsorbed slack and IES and further clarifies the mechanism and boundary conditions of the impact of IES on innovation performance.

This study aims to explore the connection between travel content consumption in social networks and social comparison, envy as well as travel intention. It analyzes whether tourists’ travel intention is affected by travel content consumption in social networks, and more importantly, whether social comparison and envy play a mediating role in this process.

Data was collected through intercept in four popular tourist spots in Guangzhou and Zhuhai in South China. A self-administered questionnaire was used. A total of 400 participants were recruited, and 291 valid questionnaires were obtained. Bias-corrected nonparametric percentile bootstrap mediation variable test method was used to test hypotheses.

The study yielded three results. First, travel content consumption in the social networks positively influences travel intention. Second, travel content consumption in social networks indirectly affects travel intention through social comparison and envy. Third, the control variables, such as gender, age, education and income, mainly affect envy.

This study constructs a theoretical framework of stimulus–cognitive appraisal–emotion–behavioral responses. To the best of the authors’ knowledge, it is the first study to reveal that the internal psychological mechanism of travel content consumption affects travel intention. It also discloses that envy of seemingly negative emotions can encourage positive behaviors in certain situations.

This study aims to focus on the optimized design and mechanical properties of gradient triply periodic minimal surface cellular structures manufactured by selective laser melting.

Uniform and gradient IWP and primitive cellular structures have been designed by the optimized function in MATLAB, and selective laser melting technology was applied to manufacture these cellular structures. Finite element analysis was applied to optimize the pinch-off problem, and compressive tests were carried out for the evaluation of mechanical properties of gradient cellular structures.

Finite element analysis shows that the elastic modulus of IWP increased as design parameter b increased, and then decreased when parameter b is higher than 5.5. The highest elastic modulus of primitive increased by 89.2% when parameter b is 6. The compressive behavior of gradient IWP and primitive shows a layer-by-layer way, and elastic modulus and first maximum compressive strength of gradient primitive are higher than that of gradient IWP. The effective energy absorption of gradient cellular structures increased as the average porosity decreased, and the effective energy absorption of gradient primitive is about twice than that of gradient IWP.

This paper presents an optimized design method for the pinch-off problem of gradient triply periodic minimal surface cellular structures.

This article aims to develop an accurate and efficient meshfree Galerkin method based on the strain smoothing technique for linear elastic continuous and fracture problems.

This paper proposed a generalized linear smoothed meshfree method (LSMM), in which the compatible strain is reconstructed by the linear smoothed strains. Based on the idea of the weighted residual method and employing three linearly independent weight functions, the linear smoothed strains can be created easily in a smoothing domain. Using various types of basic functions, LSMM can solve the linear elastic continuous and fracture problems in a unified way.

On the one hand, the LSMM inherits the properties of high efficiency and stability from the stabilized conforming nodal integration (SCNI). On the other hand, the LSMM is more accurate than the SCNI, because it can produce continuous strains instead of the piece-wise strains obtained by SCNI. Those excellent performances ensure that the LSMM has the capability to precisely track the crack propagation problems. Several numerical examples are investigated to verify the accurate, convergence rate and robustness of the present LSMM.

This study provides an accurate and efficient meshfree method for simulating crack growth.

The aim of this study is to examine the influence of consumer preferences for overseas green products and the implementation of blockchain technology on the performance of a supply chain, which comprises an overseas manufacturer and a domestic e-commerce platform. This research endeavors to identify the optimal pricing decisions and strategies for both the manufacturer and the platform in the context of the expanding e-commerce and globalization of the economy.

The authors propose and analyze four distinct models based on the selection of selling contracts by the manufacturer and the adoption strategy of blockchain by the platform, using game theory to obtain the optimal solutions for these models.

The authors show that consumer migration promotes the manufacturer's green inputs, while the expansion of green consumer proportion is not conducive to it. They also show that blockchain technology has the potential to effectively limit manufacturer cannibalization. Interestingly, the study reveals a cascading effect of advantage where the manufacturer's profit variation trend changes only with the integration of pricing power advantage and blockchain technology inputs. This effect suggests that the equilibrium strategy is achievable under the agency contract with blockchain adoption, while Pareto improvement can be obtained with blockchain technology under both selling contracts.

This research could be extended in several possible directions. First, future work could explore outsourcing strategies for overseas manufacturers. Second, more types of consumer heterogeneity and different risk preferences could be considered. Third, this study can be extended by further exploring the design of mechanisms under asymmetric demand information to make the model more realistic.

The authors examine the impact of market segmentation and consumer preferences on green supply chain decisions, and analyze supply chain members' strategic choices for selling contracts and blockchain adoptions. The research also sheds light on the theoretical underpinnings and practical applications of green supply chain development and blockchain applications.

The purpose of this paper is to achieve the trajectory tracking measurement of a moving target based on double position sensitive detectors (PSDs).

In this paper, first, a double PSD-based measurement system including hardware system and software system is built up. Then, the working principle is studied to calculate parameters, and calibration experience is conducted. Finally, this double PSD-based measurement system is used to test angular displacement and axial displacement on the tool magazine and automatic tool changer.

In the experiment, the maximum position error of a space point based on double PSD measurement system is 0.8566 mm, and the average error is 0.4716 mm. These results show that the built double PSD-based measurement system of trajectory tracking of a moving target is reasonable.

Combining the characteristics of the PSD and principles of binocular visual measurement, a non-contact three-dimensional measuring system based on double PSDs is developed. The designed double-based measurement system is quite suitable for measurement of a fast-changing illuminant or in the case that the tracking accuracy is not tight.

Customer-intensive services refer to the service that a provider needs to invest in customers with high patience and experience. Within a certain rate range, the slower service rate and the longer service time, the higher customer’s utility; however, this may cause queue congestion. And the advertising of service provider will affect the revenue. The purpose of this paper is to investigate the effects of advertising on the optimal price, service rate and the optimal revenue of such service provider at different development stages.

This paper investigates the service strategies of service provider based on advertising effects. The authors first divide service provider into insufficient customers or sufficient customers according to the development stage, then analyze the impact of advertising at different stages. The authors focus on the formulation of the optimal price, service rate and the optimal revenue of service provider at different stages.

This paper finds that in the insufficient customers stage, the service provider’s strategy of “small profits but quick turnover” is conducive to quickly accumulating customers. With the development of service provider, the advertising indirectly increases the revenue of service provider by maintaining popularity. The result also shows that with the development of service provider, the initiative of such service market has gradually been mastered by service provider, from “buyer market” to “seller market.”

The finding provides an alternative explanation for the impact of advertising on service provider’s optimal strategies; it also solves the settings of service price and rate of customer-intensive service provider at different development stages. This study is essential to create the optimal revenue and solve supply–demand conflicts (such as doctor–patient conflict) between service provider and customers.