Anti-Corrosion Methods and Materials: Volume 19 Issue 12

SOME EXAMPLES OF CORROSION IN STEAM PLANT

F.E. Marsh

The inspection of steam plant by Engineer Surveyors, either in accordance with statutory regulations when out of service, under working conditions, or at times of trouble, often…

ANTI‐CORROSION METHODS AND MATERIALS: 4: Forms of corrosion Part 3: Corrosion cracking

Corrosion cracking A metal fails due to corrosion fatigue if it cracks while being subjected to repeated or alternating tensile stresses in a corrosive environment. If the…

THE CORROSION and PROTECTION CENTRE at U.M.I.S.T.: 3: Industrial services and liaison

P. Elliott, D. Gearey

This article is the third of a series planned to outline the functions of the recently established Corrosion and Protection Centre in the University of Manchester Institute of…

8th CONGRESS of the INTERNATIONAL UNION FOR ELECTRODEPOSITION and SURFACE FINISHING

P. Wilson

A suggestion that instead of retarding corrosion it might be a good idea to think of ways of accelerating it, was made by Dr Norbert Ibl, President of the Scientific Committee, at…

EXPANSION OF ELECTROSLAG REMELTING AT FIRTH BROWN PLANT

Firth Brown Ltd. have completed modifications to their electroslag remelting plant which gives them the capability of producing electroslag remelted ingots up to 1,000 mm (40 in…

CORROSION INHIBITORS FOR ALUMINIUM IN HYDROCHLORIC ACID: Vanilline on aluminium 2S, 57S and 65S

M.N. Desai

So far, the only aldehyde reported in literature for the inhibition of the corrosion of aluminium in hydrochloric acid, is furfuraldehyde. The present article reports vanilline as…