Citation
(2011), "Room Temperature Curing, Flexibilized Epoxy Combines High Strength and Toughness with Chemical and Abrasion Resistance", Pigment & Resin Technology, Vol. 40 No. 1. https://doi.org/10.1108/prt.2011.12940aad.004
Publisher
:Emerald Group Publishing Limited
Copyright © 2011, Emerald Group Publishing Limited
Room Temperature Curing, Flexibilized Epoxy Combines High Strength and Toughness with Chemical and Abrasion Resistance
Article Type: New products From: Pigment & Resin Technology, Volume 40, Issue 1
Hackensack, NJ – combining the benefits of epoxy resins and polyurethanes, Master Bond Polymer System EP30D-7 offers superior strength, flexibility, abrasion resistance and toughness. This two component epoxy is ideal for high-performance bonding, sealing, coating and encapsulating applications in the electronic, electrical, computer, metalworking, optical, electro-optical and oil/chemical processing industries. Its lower exotherm also makes it ideal for casting and potting in cross-section thicknesses of over 1 in.
Serviceable over the wide temperature range of −100°F to above +250°F, EP30D-7 is designed to cure at room temperature or more rapidly at elevated temperatures with minimal shrinkage. This system is 100 percent reactive and contains no solvents or diluents. The cured elastomer is an excellent electrical insulator. It also resists thermal cycling well and stands up to a variety of chemicals.
EP30D-7 has an impressive tensile strength of greater than 1,600 ψ, a Shore A hardness of 90, an elongation of more than 40 percent, and a dielectric constant exceeding 400 V/m. It is resistant to thermal cycling and chemicals including water, fuels and inorganic solvents even at high temperatures. It is available for use in pint, quart, gallon and five-gallon container kits.