To read this content please select one of the options below:

Influence of V doping on the microstructure, chemical stability, mechanical and tribological properties of MoS2 coatings

Xiaolong Lu (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Lanzhou, China)
Xudong Sui (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Lanzhou, China and Qingdao Center of Resource Chemistry and New Materials, Qingdao, China)
Xiao Zhang (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Lanzhou, China)
Zhen Yan (Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, University of Chinese Academy of Sciences, Lanzhou, China)
Junying Hao (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Lanzhou, China)

Industrial Lubrication and Tribology

ISSN: 0036-8792

Article publication date: 6 December 2023

Issue publication date: 16 January 2024

125

Abstract

Purpose

This study aims to investigate the effect of V doping on the microstructure, chemical stability, mechanical and vacuum tribological behavior of sputtered MoS2 coatings.

Design/methodology/approach

The MoS2-V coatings are fabricated via tuning V target current by magnetron sputtering technique. The structural characteristic and elemental content of the coatings are measured by field emission scanning electron microscopy, X-ray diffractometer, electron probe X-ray micro-analyzer, Raman, X-ray photoelectron spectroscopy, high resolution transmission electron microscope and energy dispersive spectrometer. The hardness of the deposited coatings are tested by a nanoindentation technique. The vacuum tribological properties of MoS2-V coatings are studied by a ball-on-disc tribometer.

Findings

Introducing V into the MoS2 coatings results in a more compact microstructure. The hardness of the coatings increases with the doping of V. The MoS2-V coating deposited at a current of 0.2 A obtains the lowest friction coefficient (0.043) under vacuum. As the amount of V doping increases, the wear rate of the coating decreases first and then increases, among which the coating deposited at a current of 0.5 A has the lowest wear rate of 2.2 × 10–6 mm3/N·m.

Originality/value

This work elucidates the role of V doping on the lubrication mechanism of MoS2 coatings in a vacuum environment, and the MoS2-V coating is expected to be applied as a solid lubricant in space environment.

Keywords

Acknowledgements

The authors gratefully acknowledge the financial support received from the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB0470203), the National Natural Science Foundation of China (51835012, 51975554), the basic research projects (2020-JCJQ-ZD-155–12) and the Natural Science Foundation of Gansu Province (21JR7RA081, 21JR7RA090).

Declaration of competing interest.

All the authors declare no competing financial interests for this paper.

Since submision of this article, the following authors have updated their affiliation: Xudong Sui is at the Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China; Zhen Yan is at the State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Lanzhou, China; and Junying Hao is at the Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China and Qingdao Center of Resource Chemistry and New Materials, Qingdao, China.

Citation

Lu, X., Sui, X., Zhang, X., Yan, Z. and Hao, J. (2024), "Influence of V doping on the microstructure, chemical stability, mechanical and tribological properties of MoS2 coatings", Industrial Lubrication and Tribology, Vol. 76 No. 1, pp. 29-40. https://doi.org/10.1108/ILT-09-2023-0306

Publisher

:

Emerald Publishing Limited

Copyright © 2023, Emerald Publishing Limited

Related articles