Pattern design construction for ladies' made‐to‐measure outerwear: Part III: Strategies for made‐to‐measure patterns
Abstract
Prior to implementing computerised pattern alterations for figuration on a commercial CAD system, a large database with reference to the standard graded patterns, the alteration movements and relevant information needs to be generated. There are many difficulties in creating grade rules and alteration movements, especially for the bust suppression and the shaped sleeve. In order to obtain sophisticated patterns with a good fit for MTM (made‐to‐measure) clothing, the authors' pattern alteration technique is a combination of pattern design construction and grading. The procedure is divided into ten stages and the practical verification was carried out in the form of seven case studies. In addition, drafting rules on the MicroFit system for automatic pattern generation are demonstrated by converting the numerical grade rules created on the GGT AccuMark system into body‐related formulae.
Keywords
Citation
Bond, T., Liao, S.C. and Turner, J.P. (2000), "Pattern design construction for ladies' made‐to‐measure outerwear: Part III: Strategies for made‐to‐measure patterns", Journal of Fashion Marketing and Management, Vol. 4 No. 3, pp. 201-221. https://doi.org/10.1108/eb022591
Publisher
:MCB UP Ltd
Copyright © 2000, MCB UP Limited