New water-based flexographic ink based on new ter-polymer nano-particles as eco-friendly binders – Part II
ISSN: 0369-9420
Article publication date: 13 May 2020
Issue publication date: 19 October 2020
Abstract
Purpose
The purpose of this study is to prepare, characterise and evaluate nano-emulsions of ter-polymers of various compositions as eco-friendly binders for flexographic ink industry.
Design/methodology/approach
Various nano-emulsions of ter-polymers were prepared based on Vinyl acetate, Vinyl Versatate, butyl acrylate, acrylic acid and acrylamide monomers by means of a conventional seeded emulsion polymerisation technique, using K2S2O8 as the initiator. The characterisation of the prepared emulsions was performed using Fourier transform infrared, thermo-gravimetric analysis, gel permeation chromatography and transmission electron microscopy. A selection of co-polymers and ter-polymers were formulated with pigments and additional ingredients, as water-based flexographic inks. The inks were characterised for their rheological properties, pH, degree of dispersion, water-resistance and colour density.
Findings
It was found that the low viscosity of the prepared polymers may reduce the film thickness of the flexographic inks and may also increase the spreading of the ink on the surface. As a result, stable modified poly acrylate-based latex with improved physico-mechanical properties was obtained. The prepared latexes showed improved properties such as enhanced thermal stability and better water resistance. The effect of the emulsifier type on the properties of the resulting emulsion latexes and their corresponding films were investigated. Also, as the hydrophobic monomer increases, so does the colour density and increasing the binder ratio enhances the gloss values. The improving in gloss values were obtained and provide excellent adhesion properties for both the pigment particles and the base paper.
Research limitations/implications
The study focusses on the preparation of new water-based ter-polymer nano-particles and their use as eco-friendly binders for flexographic ink industry. Ink formulations based on other different type emulsion polymers could also be studied to assess the applicability of the ink formulation system found for other binders.
Practical implications
The ink formulations developed could find use in industrial-scale printing.
Originality/value
Eco-friendly environment and low-cost ink formulations for printing on paper substrates are novel.
Keywords
Citation
Abd El-Wahab, H., Meligi, G.A., Hassaan, M.G. and Lin, L. (2020), "New water-based flexographic ink based on new ter-polymer nano-particles as eco-friendly binders – Part II", Pigment & Resin Technology, Vol. 49 No. 6, pp. 473-482. https://doi.org/10.1108/PRT-12-2019-0111
Publisher
:Emerald Publishing Limited
Copyright © 2020, Emerald Publishing Limited